|
IT7-MAX2V2.0 |
|
Intel 845PE Based Pentium 4 ATX Mainboard
DDR 333, Serial ATA, ATA133 RAID, 6 Channel Audio, IEEE 1394
SoftMenu™ Technology |
|
Specifications: |
CPU
- Supports Intel Pentium 4 Socket 478 processors with 533/400 MHz Front
Side Bus
- Supports Intel Hyper-Threading Technology
Chipset
- Intel 82845PE / 82801DB (ICH4)
- Supports Ultra DMA 100/66/33
- Accelerated Graphics Port connector supports AGP 4X Interface (1.5V only)
Memory
- Three 184-pin DIMM sockets (unbuffered Non-ECC DIMM)
- Supports 3 DIMM DDR 200/266/333 or 3 DIMM DDR 200/266(Max. 2GB)
Serial ATA
- On board 2-Channel Serial ATA interface of 150MB/sec
ATA 133 RAID
- High Point HPT374 IDE RAID controller
Media XP (Optional)
- Card Reader (Compact Flash/Secure Digital/Memory Stick),
- Audio, USB 2.0 and IEEE 1394 front panel
Audio
- 6-Channel AC 97 CODEC on board
USB 2.0
- Supports 10 Ports USB 2.0 at 480 Mb/sec transfer rate
IEEE 1394
- Supports 3 Ports IEEE 1394 at 400/200/100 Mb/s transfer rate
LAN
- On board RTL8100B 10/100M PCI Fast Ethernet Controller
System BIOS
- SoftMenu™ Technology to set CPU parameters
- Supports Plug-and-Play (PNP)
- Supports Advanced Configuration Power Interface (ACPI)
Internal I/O Connectors
- 1 x AGP, 4 x PCI slots
- 1 x Floppy Port supports up to 2.88MB
- 2 x Ultra DMA 100/66/33 Connectors
- 2 x Ultra DMA 133/100/66/33 Connectors (RAID)
- 2 x Serial ATA 150MB/s Connectors
- 1 x 6 Channel audio FPIO pin header (for Media XP)
- 2 x USB headers, 1 x IEEE 1394 header
- 1 x CD-IN, 1 x AUX-IN
Back Panel I/O
- 1 x PS/2 Keyboard, 1 x PS/2 mouse
- 4 x USB connectors
- 2 x IEEE 1394 connectors
- 1 x S/P DIF Out connector
- 1 x Audio connectors (Center/Sub, Surround Speaker)
- 1 x Audio connectors (Front Speaker, Line-in, Mic-in)
- 2 x USB, 1 x RJ-45 LAN Connector
Miscellaneous
- ATX form factor
- Hardware monitoring - Including Fan speeds, Voltages, CPU and System environment
temperature
- Supports Wake Up by LAN, Modem Ring, RTC Alarm
- Supports Keyboard and Mouse Power On
- Supports STR (Suspend to RAM)
|
|
|
|