1. Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With incorrect AWDFLASH version, the GUID will be erased, and leads to IEEE1394 peer to peer function failure. AWDFLASH 8.23K is included in this BIOS package.
2. Fixed CPU temperature too high issue.
3. Raised highest CPU FSB up to 300 MHz for "user define mode" in
   SoftMenu.
4. Fixed SATA RAID-0 data corruption issue by adding a new option
   "EXT-P2P's Discard Time" in "integrated Peripherals". The default
   setting is "30 us" ; which is recommended by NVidia. In case the problem is still there, try "1 ms" please.
5. BIOS Compile Date: 5/13/2003.

1. Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With incorrect AWDFLASH version, the GUID will be erased, and leads to IEEE1394 peer to peer function failed. AWDFLASH 8.23K is included in this BIOS package.
2. Changed SSID of NF7-M and NF7 to "1C01" and "1C02" respectively.
3. Changed default setting of "Floppy A" to "1.44M, 3.5in." after fail- safe default loaded.
4. Adds auto-detect function of "Dual Channel DDR". The DDR modules should be installed in DIMM-3 and DIMM-2.
5. Fixed system instability issue when a PCI card installed in PCI-4 and in Windows 2000 environment.
6. BIOS Compile Date: 4/10/2003.
   
   ?

1. Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With
   incorrect AWDFLASH version, the GUID will be erased, and leads to
   IEEE1394 peer to peer function failed. AWDFLASH 8.23D is included in
   this BIOS package.
2. Change the write-protection mechanism of Flash ROM programming.
3. Support Thorton, Throughbred, Barton 2600+ CPU.
4. The default value on DRAM Ration changes to"Auto".
5. Added "CPU Disconnect Function" option on chipset to turn on/off C1 disconnect.
6. The CPU frequency 1917Mhz revised to 1916MHz.
7. DMI Pool data shows to"socket A".
8. The default value of "Memory Timings" revises to "Optimal".
9. Fix the problem that system can not detect USB Device under WinME while resume from S3,S4 mode, and lead to usb connector failed.
10. Fix system can not show fan speed in PC Health Status while using lower
    speed FAN.
11. Add"IDE Bus Master" function to improve transfer speed of GHOST, and
    default value set up to disabled.
12. Fix the problem while disabled"IDE Controller", and truned off IDE Controller, it would fail to share IRQ 14, 15;thus, IDE Controller would NOT be turned off, it would show "IDE Controller"IRQ to be "NA" in PCI list.
13. Provides"AGP aperture size" option for NF7-M, while use on chip VGA.
14. BIOS compile date: 3/27/2003.

BIOS ID: 13

1. Bitte verwenden Sie das Tool AWDFLASH 8.23D oder höher, um ein BIOS-Updater der Mainboards der NF7-Serie durchzuführen.
   Wenn Sie die falsche Version des AWDFLASH verwenden, wird damit die GUID gelöscht und führt zu einem Fehler IEEE1394 peer-to-peer-Funktion. AWDFLASH 8.23D ist bereits in dem BIOS-Download-Paket enthalten.
2. Ändert die CPU-Schnittstellen-Tabelle für 333FSB CPUs.
3. Korrigiert fehlerhaftes Auslesen der "CPU Temperature".
   Mit den BIOS Versonen 1.0, 1.1 und V1.2 berichtete das BIOS, die CPU Temperatur sei zu hoch.
   Die BIOS-Version 1.3 zeigt die korrekte CPU-Temperatur an; hierzu muß jedoch auch die Hardware Monitoring-Software auf den neusten Stand gebracht werden "HWM_NF7V13.EXE".
4. Ändert die voreingestellte Jahreszahl auf 2003.
5. Updated SiliconImage Sil3112A BIOS auf Version 4.2.00.
6. Fügt die Funktion "Shutdown when CPU FAN fails" hinzu.
7. Verbesserung der Funktionen "CPU shutdown temperature" und "CPU Warning
   Temperature".
8. Korrigiert Problem unter Windows XP beim Herunterfahren wenn im BIOS die Option "USB support" auf "By BIOS" aktiviert ist.
9. Unterstützt AMD 333 FSB Barton CPU.
10. BIOS erstellt am: 01/07/2003.

1. Original BIOS.
2. BIOS erstellt am: 11/04/2002.

SATA driver disk V1.2
http://202.168.194.118/abit/upload/fae/disk12.exe