1. Supports P4 Extreme Edition CPUs
2. Added DRAM Frequency & HOST/DRAM Clock items to post screen
3. Added PWM Temperature 1 & 2 shutdown temperature maximums to 130 degree C.
4. Revised DMI information.
5. Updated CPU micro code.
6. BIOS compile date: 06/25/2004

1. First Release.
2. BIOS compile date: 05/26/2004

1. ABIT INTEL / VIA / Silicon Image 3112 / 3114 SATA DRIVERDISK
2. For WIN XP/ 2000/ 2003 IA32
3. The floppy disk containing RAID driver files which can be used to pre-install the RAID driver during the F6 portion of Windows setup.
4. v 1.32

1. Intel Chipset Driver
2. For Win98/Me/2000/XP/2003
3. v 6.0.1.1002
4. Relase note

1. Realtek Audio ALC880 Driver
2. For Win 2000 / XP
3. v 3.57

1. Realtek Lan Chip 8110S Driver
2. For Win ME / 2000 / XP
3. v 6.12

1. Intel Application Accelerator RAID Edition for Windows2000 and WindowsXP.
2. It is not necessary to install the program until you enable the "RAID Function" in the BIOS menu of "OnChip Serial ATA".
3. The floppy disk containing RAID driver files which can be used to pre-install the RAID driver during the F6 portion of Windows setup.
4. Multi-Language
5. V 4.1 Readme

1. ABIT µGuru v 2.1.1.5
2. For AA8, AG8, AS8, AV8

1. ABIT uGuru v 2.1.1.0
2. For AA8, AG8, AS8, AV8
3. Readme

1. Supports P4 Extreme Edition CPUs
2. Added DRAM Frequency & HOST/DRAM Clock items to post screen
3. Added PWM Temperature 1 & 2 shutdown temperature maximums to 130 degree C.
4. Revised DMI information.
5. Updated CPU micro code.
6. BIOS compile date: 06/25/2004

1. First Release.
2. BIOS compile date: 05/26/2004

1. Intel Application Accelerator RAID Edition for Windows2000 and WindowsXP.
2. It is not necessary to install the program until you enable the "RAID Function" in the BIOS menu of "OnChip Serial ATA".
3. The floppy disk containing RAID driver files which can be used to pre-install the RAID driver during the F6 portion of Windows setup.
4. Multi-Language
5. V 4.1 Readme

1. ABIT INTEL / VIA / Silicon Image 3112 / 3114 SATA DRIVERDISK
2. For WIN XP/ 2000/ 2003 IA32
3. The floppy disk containing RAID driver files which can be used to pre-install the RAID driver during the F6 portion of Windows setup.
4. v 1.32

1. Realtek Lan Chip 8110S Driver
2. For Win ME / 2000 / XP
3. v 6.12

1. Realtek Audio ALC880 Driver
2. For Win 2000 / XP
3. v 3.57

1. Intel Chipset Driver
2. For Win98/Me/2000/XP/2003
3. v 6.0.1.1002
4. Relase note

1. ABIT µGuru v 2.1.1.5
2. For AA8, AG8, AS8, AV8

1. ABIT uGuru v 2.1.1.0
2. For AA8, AG8, AS8, AV8
3. Readme

1. Shows CPU Clock value from AC2003.
2. Added "Interleaved Mode" or "Asymmetric Mode" wording after Dual Channel.
3. Corrected "Restore on AC Power Loss" item.
4. Added notification when no 80-wire cable is installed.
5. BIOS compile date: 07/07/2004

1. Supports AG8-V.
2. Supports P4 Extreme Edition CPUs.
3. Added DRAM Frequency & HOST/DRAM Clock items to post screen.
4. Added PWM Temperature 1 & 2 shutdown temperature maximums to 130 degree C.
5. Revised DMI information.
6. Updated CPU micro code.
7. BIOS compile date: 06/25/2004

1. First Release.
2. BIOS compile date: 05/28/2004

1. ABIT INTEL / VIA / Silicon Image 3112 / 3114 SATA DRIVERDISK
2. For WIN XP/ 2000/ 2003 IA32
3. The floppy disk containing RAID driver files which can be used to pre-install the RAID driver during the F6 portion of Windows setup.
4. v 1.32

1. Realtek Lan Chip 8110S Driver
2. For Win ME / 2000 / XP
3. v 6.12

1. Realtek Audio Driver v3.59
2. For NT4

1. Realtek Audio Driver v3.59
2. For 95/98

1. Realtek Aduio Driver AP v3.59

1. Realtek Audio Driver v3.59
2. For Win98SE / Me / 2000 / XP

1. Intel Chipset Driver
2. For Win98/Me/2000/XP/2003
3. v 6.0.1.1002
4. Relase note

1. ABIT µGuru v 2.1.1.5
2. For AA8, AG8, AS8, AV8

1. ABIT uGuru v 2.1.1.0
2. For AA8, AG8, AG8-3rd Eye, AG8-V, AS8, AV8
3. Readme

1. Shows CPU Clock value from AC2003.
2. Added "Interleaved Mode" or "Asymmetric Mode" wording after Dual Channel.
3. Corrected "Restore on AC Power Loss" item.
4. Added notification when no 80-wire cable is installed.
5. BIOS compile date: 07/07/2004

1. Supports AG8-V.
2. Supports P4 Extreme Edition CPUs.
3. Added DRAM Frequency & HOST/DRAM Clock items to post screen.
4. Added PWM Temperature 1 & 2 shutdown temperature maximums to 130 degree C.
5. Revised DMI information.
6. Updated CPU micro code.
7. BIOS compile date: 06/25/2004

1. First Release.
2. BIOS compile date: 05/28/2004

1. Realtek Audio Driver v3.59
2. For NT4

1. Realtek Lan Chip 8110S Driver
2. For Win ME / 2000 / XP
3. v 6.12

1. ABIT INTEL / VIA / Silicon Image 3112 / 3114 SATA DRIVERDISK
2. For WIN XP/ 2000/ 2003 IA32
3. The floppy disk containing RAID driver files which can be used to pre-install the RAID driver during the F6 portion of Windows setup.
4. v 1.32

1. Intel Chipset Driver
2. For Win98/Me/2000/XP/2003
3. v 6.0.1.1002
4. Relase note

1. Realtek Audio Driver v3.59
2. For Win98SE / Me / 2000 / XP

1. Realtek Aduio Driver AP v3.59

1. Realtek Audio Driver v3.59
2. For 95/98

1. ABIT µGuru v 2.1.1.5
2. For AA8, AG8, AS8, AV8

1. ABIT uGuru v 2.1.1.0
2. For AA8, AG8, AG8-3rd Eye, AG8-V, AS8, AV8
3. Readme

1. Shows CPU Clock value from AC2003.
2. Added "Interleaved Mode" or "Asymmetric Mode" wording after Dual Channel.
3. Corrected "Restore on AC Power Loss" item.
4. Added notification when no 80-wire cable is installed.
5. BIOS compile date: 07/07/2004

1. Supports AG8-V.
2. Supports P4 Extreme Edition CPUs.
3. Added DRAM Frequency & HOST/DRAM Clock items to post screen.
4. Added PWM Temperature 1 & 2 shutdown temperature maximums to 130 degree C.
5. Revised DMI information.
6. Updated CPU micro code.
7. BIOS compile date: 06/25/2004

1. First Release.
2. BIOS compile date: 05/28/2004

1. Intel Chipset Driver
2. For Win98/Me/2000/XP/2003
3. v 6.0.1.1002
4. Relase note

1. ABIT INTEL / VIA / Silicon Image 3112 / 3114 SATA DRIVERDISK
2. For WIN XP/ 2000/ 2003 IA32
3. The floppy disk containing RAID driver files which can be used to pre-install the RAID driver during the F6 portion of Windows setup.
4. v 1.32

1. Realtek Aduio Driver AP v3.59

1. Realtek Audio Driver v3.59
2. For 95/98

1. Realtek Lan Chip 8110S Driver
2. For Win ME / 2000 / XP
3. v 6.12

1. Realtek Audio Driver v3.59
2. For Win98SE / Me / 2000 / XP

1. Realtek Audio Driver v3.59
2. For NT4

1. Updated CPU Micro Code.
2. Shows MAC Address of onboard LAN chip in System Configuration section if "Onboard Network Controller" is disabled.
3. Added AWDFLASH v8.32 support for the "ALT+F2" hot key function.
4. Enhanced compatibility with certain power supplies.
5. Fixed an issue where the "OnChip SATA Raid Rom" item could not be disabled.
6. BIOS compile date: 04/09/2004

1. Please use the AWDFLASH v8.24F flash utility to update the AI7 BIOS.
2. Fixed a problem where the system cannot boot into Windows if
   1. The OS is installed on the SATA hard disk when both SATA and PATA hard disks are present.
   2. The PATA hard disk is removed after the OS installation.
3. Added "CPU FAN Failed Warning" item.
4. Updated Prescott CPU micro code.
5. Updated Intel OSB logo.
6. Changed the default year to 2004.
7. Added "Full Screen LOGO Show" and replaced "Intel OnScreen Branding" item.
8. Updated INTEL RAID BIOS to version 3.5.0.3003.
9. BIOS compile date: 02/25/2004.

1. Please use flash utility AWDFLASH v8.24F to update AI7 BIOS.
2. Added Pentium 4 Extreme Edition support.
3. Disabled Winbond W83627HF sensor unit to prevent incorrect CPU voltage information shown in some third party software.
4. Fixed the problem where the BIOS will show the string "AGP/PCI Frequency is 66/33MHz" twice after warm boot.
5. Fixed the problem where certain CD/DVD-ROM could not be correctly detected when there is a HDD drive attached on the same IDE cable.
6. Fixed the problem where system will reboot when the "Resume by Alarm" is enabled and the user pressed the power button to shutdown the system during POST.
7. Fixed the problem where IDE devices cannot be detected correctly if TAB and DEL is pressed at the same time when entering the BIOS setup.
8. Fixed the problem where HDD size is detected as 136GB when 200/250/300 GB SATA drives are connected to SATA1 or SATA2 (ICH5 SATA channels).
9. Enhance system performance.
10. BIOS compile date: 11/10/2003.

1. Please use flash utility AWDFLASH v8.24F to update AI7 BIOS.
2. Fixed the problem "CPU Fan Fail Shutdown" fails to function.
3. Fixed the problem "Restore On AC Power Loss" fails to function.
4. Revise the "NB FanEQ Control" temperature range to 25~50℃.
5. BIOS compile date: 10/15/2003.

1. Please use flash utility AWDFLASH v8.24F to update AI7 BIOS.
2. Fixed the system hangs at post code 52h when using Media XP and Iomega USB ZIP 250.
3. Fixed some string will not be shown on the POST screen when pressed TAB key to enter POST screen.
4. Synchronize the external clock and voltage with OC Guru.
5. Synchronize the options related to temperature monitoring and FanEQ with μGuru .
6. Add CPU throttling function.
7. BIOS compile date: 10/07/2003.

1. Please use flash utility AWDFLASH v8.24F to update AI7 BIOS.
2. First release.
3. BIOS compile date: 09/23/2003

1. Audio Driver v3.51
2. Win95/98.

1. Audio Driver v3.51
2. Win98SE /Me/2000/XP

1. Audio Driver v3.51
2. WinNT

1. Onboard LAN (RTL8100B/8101L)
2. Win98SE/WinMe/Win2000/WinXP.
3. v606
   

1. Intel Application Accelerator RAID Edition for Windows2000 and WindowsXP.
2. It is not necessary to install the program until you enable the "RAID Function" in the BIOS menu of "OnChip Serial ATA".
3. The floppy disk containing RAID driver files which can be used to pre-install the RAID driver during the F6 portion of WindowsXP setup.
4. Floppy
5. V3.51
   

1. Intel Application Accelerator RAID Edition for Windows2000 and WindowsXP.
2. It is not necessary to install the program until you enable the "RAID Function" in the BIOS menu of "OnChip Serial ATA".
3. The floppy disk containing RAID driver files which can be used to pre-install the RAID driver during the F6 portion of WindowsXP setup.
4. Multi-Language
5. V3.51
   

1. Intel INF Update v5.02.1003.
2. Windows* 2000, Windows* 98 SE, Windows* Me, Windows* XP Home Edition, Windows* XP Professional, Windows Server 2003.

1. USB 2.0 Driver V1.1.0.2
2. Window 98SE/Me.
3. For Windows 2000 users, please upgrade to Service Pack 4 or later.
4. For Windows XP users, please upgrade to Service Pack 1 or later.
   

1. ABIT µGuru utility v1.21 for AI7, AN7 and KV8-MAX3
2. Fixed an issue where the system will show 119 degrees under certain circumstances. Please also update the motherboard BIOS version to KV8_19/AI7_16/AN7_15 or later
3. MD5sum: 70c2124f0d9ea170285e0c64385fe3e7
   

1. ABIT µGuru utility v1.18 for AI7, AN7 and KV8-MAX3
2. MD5sum: 3218039e16504e11caaeda1c39216ab3

1. ABIT μGuru utility v1.14 for AI7 and KV8-MAX3.

1. Please use the AWDFLASH v8.24F flash utility to update the AN7 BIOS.
2. Added Auto-Shutdown function when CCMOS jumper is set to pins 2-3. The correct CCMOS jumper should be on pins 1-2; in case it is placed on 2-3, the CPU core voltage will be abnormally high, an the system will shut down automatically to protect the CPU from damage.
3. Fixed an issue where USB-ZIP will be detected as a harddisk.
4. Updated SI3112 SATA BIOS to v4.2.47.
5. Revised the characters in "Wakeup by Alarm".
6. Enhanced USB 2.0 device compatibility, "Integrated Peripherals / OnChip PCI Device / USB 2.0 Device Compatible / Disabled -> Enabled".
7. Fixed an issue where SCSI boot ID cannot be selected when certain SCSI cards are installed.
8. Fixed an issue where SATA HDD boot up will fail if a PS/2 mouse is not installed.
9. Fixed an issue where the system will show 119 degrees under certain circumstances.
10. BIOS compile date: 03/04/2004.

1. Please use the AWDFLASH v8.24F flash utility to update the AN7 BIOS.
2. Changed default RTC year to 2004.
3. Updated Silicon Image 3112 controller ROM to version 4.2.43.
4. Added CPU fan fail warning option.
5. Added AGP frequency on the fly option.
6. Saved CPU default ratio to µGuru.
7. Added SATA ROM control option.
8. Fixed mouse power on fails to function when using certain mice.
9. Enhanced compatibility with WD400AB hard disk.
10. Synchronized FanEQ temperature settings with OC Guru.
11. Reduced the time it takes to resume from STR state when using Windows 98 and Windows ME.
12. Added "Full screen logo show" option.
13. BIOS compile date: 01/06/2004

1. Please use the AWDFLASH v8.24F flash utility to update the AN7 BIOS.
2. Fixed the problem where after pressing "F8" for OC on the fly and then pressing ESC, the image on screen will become distorted.
3. Fixed the wake on ring fail problem.
4. Fixed the problem where a SATA hard disk will not respond after resuming from S3 mode.
5. Updated DRAM DMI information and revised the wording of memory status from "DDR SDRAM at Bank" to "DDR at DIMM" in the system configuration table.
6. Fixed the problem where the DRAM timing is not changed after saving and exiting the BIOS.
7. Enhanced SATA device stability.
8. Added resume from S3/S4 mode using USB devices.
9. Fixed the problem where the system cannot boot into Windows if
   1. The OS is installed in the SATA hard disk when both the SATA and PATA hard disks are present
   2. The PATA hard disk is removed after the OS installation.
10. BIOS compile date: 11/13/2003
    

1. Please use flash utility AWDFLASH v8.24F to update AN7 BIOS.
2. First release.
3. BIOS compile date: 11/11/2003

1. nForce2 Chipset Driver
2. For Windows 98/ME
3. v 4.20
4. Readme

1. ABIT INTEL / VIA / Silicon Image 3112 / 3114 SATA Driver Disk
2. For Windows XP/ 2000/ 2003 IA32
3. v 1.32

1. nForce2 Chipset Driver
2. For Windows 2000/XP
3. v 5.03
4. Readme

1. USB 2.0 Driver
2. For Windows 98/ME
3. v2.171

1. SiliconImage 3112 SATA Driver
2. v 1.0.0.47
3. FOR 98se/ME/NT/2000/XP/2003 IA32

1. OrangeWare USB 2.0 Driver
2. Windows9x/Me

1. nForce2 Chipset Driver
2. Win2000/XP
3. 2003/11/07
   

1. SiliconImage 3112A SATA Driver
2. 1.0.0.28
3. Win9x / Me / 2000 / XP
4. Note: The BIOS version should coincide with the proper driver version.
   BIOS V4.2.1.2 => Driver v1.0.0.28
   BIOS V4.2.0.0 => Driver v1.0.0.28
   BIOS V4.1.5.0 => Driver v1.0.0.22
   
   

1. nForce2 Chipset Driver.
2. Win98SE/Me Win2000/XP
3. 2003/11/07

1. SiliconImage 3112A SATA Driver
2. 1.0.0.28
3. Floppy
4. The floppy disk contains driver files that can be used to pre-install the RAID driver during the F6 portion of WindowsXP setup.
5. Note: The BIOS version should coincide with the proper driver version.
   BIOS V4.2.1.2 => Driver v1.0.0.28
   BIOS V4.2.0.0 => Driver v1.0.0.28
   BIOS V4.1.5.0 => Driver v1.0.0.22
   
   

1. ABIT µGuru utility v1.21 for AI7, AN7 and KV8-MAX3
2. Fixed an issue where the system will show 119 degrees under certain circumstances. Please also update the motherboard BIOS version to KV8_19/AI7_16/AN7_15 or later
3. MD5sum: 70c2124f0d9ea170285e0c64385fe3e7
   

1. ABIT µGuru utility v1.18 for AI7, AN7 and KV8-MAX3
2. MD5sum: 3218039e16504e11caaeda1c39216ab3

1. Removed “OC On The Fly” item from ABIT EQ
2. Fixed an issue where the system temperature would be wrong if ABIT EQ Beep Control was disabled.
3. Revised help information in Multiplier factor about not supporting “OC On The Fly”.
4. Added P4 Extreme Edition & Celeron-D logo.
5. Supports µGuru Clock.
6. Updated CPU micro code.
7. Added PWM Temperature maximum to 130 degree C.
8. Revised DMI information.
9. BIOS compile date: 06/28/2004

1. Please use flash utility AWDFLASH v8.32 to update AS8 BIOS
2. First release.
3. BIOS compile date: 04/28/2004

1. Intel Application Accelerator RAID Edition for Windows2000 and WindowsXP.
2. It is not necessary to install the program until you enable the "RAID Function" in the BIOS menu of "OnChip Serial ATA".
3. The floppy disk containing RAID driver files which can be used to pre-install the RAID driver during the F6 portion of WindowsXP setup.
4. Multi-Language
5. V3.53
6. Readme

1. Chipset Driver
2. Win98/Me/2000/XP/2003
3. v 5.11.1002
4. Relase note
   

1. Realtek Audio Driver v3.57
2. For 95/98

1. Realtek Aduio Driver AP v3.57

1. Realtek Audio Driver v3.57
2. For NT4

1. Intel Application Accelerator RAID Edition for Windows2000 and WindowsXP.
2. It is not necessary to install the program until you enable the "RAID Function" in the BIOS menu of "OnChip Serial ATA".
3. The floppy disk containing RAID driver files which can be used to pre-install the RAID driver during the F6 portion of WindowsXP setup.
4. Floppy
5. v3.53
6. Readme

1. Realtek Audio Driver v3.57
2. For Win98SE / Me / 2000 / XP

1. 1. Realtek Lan Chip for 8100x
2. v6.06

1. uGuru v2.1.0.4
2. For AS8

1. ABIT µGuru v 2.1.1.5
2. For AA8, AG8, AS8, AV8

1. ABIT uGuru v 2.1.1.0
2. For AA8, AG8, AS8, AV8
3. Readme

1. µGuru 2.108 for AS8

1. Change the default year after clear CMOS to 2003.
2. Add AMD Duron 1400(133)/1600(133)/1800(133) support.
3. Change the wording "DDR SDRAM at DIMM" to "DDR at DIMM" in order to match the wording on the PCB.
4. BIOS compile date: 08/29/2003.
   

1. Update HPT 374 BIOS from 1.1 to 1.22 to fix special boot sequence issue.
   • Use PS/2 keyboard and mouse simultaneously.
   • HDD attached to IDE 3 or 4.
   • CDROM attached to IDE2.
   • When above 3 description are true, booting up from Win 98SE floppy disk will fail to find some system files.
2. Fix system paused at C3 after cleared CMOS with Sumsung DDR K4H560838D Modul.
3. BIOS Compile Date: 10/11/2002.

1. Support Athlon XP 2400+, 2600+ CPU. Please be noted that Athlon XP 2400+ and 2600+ CPU need AMD certified heatsink; otherwise, the system will be quite unstable or even fail to boot up. Please check AMD recommended CPU cooler in following URL. http://www.amd.com/gb-uk/Processors/ComputingSolutions/0,,30_288_1274_3734^4348^4356,00.html
2. HPT 374 BIOS Version 1.21.
3. BIOS Compile Date: 8/22/2002

1. Support new 0.13micron process AthlonXP CPU-Throughbred.
2. HPT 374 BIOS Version 1.21.
3. BIOS Compile Date: 6/05/2002

1. Add the option "Onboard Lan Boot ROM". The default setting is "Disabled" that to shorten the booting time.
2. HPT 374 BIOS Version 1.21.
3. BIOS Compile Date: 04/09/2002.

1. First Release.
2. HPT 374 BIOS Version 1.21.
3. BIOS Compile Date: 04/03/2002.

1. VIA 4in1 ServicePack
2. Win98/Me/2000/XP/2003
3. Ver 4.51
4. Installation Guide

1. HPT374 Driver version 1.23.  -**New**
2. For Win ME, Win2000, Win NT, Win XP.
   　

1. VIA Service Pack 4in1.
2. For WinMe, Win2000, Win XP.

1. HPT374 Driver.
2. For WinMe, Win2000, Win XP.

1. VIA USB Filter Driver.
2. For WinMe, Win2000, Win XP.

1. VIA USB 2.0 Driver.
2. For WinMe, Win2000, Win XP.

1. LAN Card Driver.
2. For WinMe, Win2000, Win XP.

1. Add AMD Duron 1400(133)/1600(133)/1800(133) support.
2. Fix the issue that the system occasionally hangs at post code 26 if the system is using 133/166 FSB CPU and the power was turned off during boot up procedure when the post code is AE.
3. HPT 374 BIOS version 1.23.
4. BIOS compile date: 08/28/2003.

1. Follow AMD's recommendation that" CPU Disconnect Function "should be implemented to make CPU slow down in idle state, and the default value sets up to Enable.
2. Follow AMD's recommendation to revise the trigger timing of LM90 for Palomino CPU(model 6).
3. Support Barton 2600+(333 FSB) and Thorton2000+(266 FSB)/2200+(266 FSB)/2400+(266 FSB)/2600+(333 FSB).
4. Revises some CPU frequency(1466,1666,1916,2166)to be AMD officially suggested figures.(1467,1667,1917,2167).
5. HPT 374 BIOS version 1.23.
6. BIOS compile date 3/27/2003.

BIOS ID: DC

1. The default year in BIOS up to 2003.
2. Fix Athlon XP 1400(100) CPU failure to power up by special operations:
   a. Discharge CMOS data.
   b. Enter BIOS Setup page.
   c. Save& Exit without doing anything.
3. Fix the reading of CPU Working Frequency for 166MHz CPU.
4. HPT374 BIOS version 1.22.
5. BIOS Compile Date: 01/08/2003.
   　

BIOS ID: C5

1. Provides CPU settings for AMD Athlon XP 2500+/2600+/2800+/3000+(333).

2. Fixes LAN transfer error after 96 hours continuous LAN test while CPU/DRAM = 100/133 and 100/166.

3. Revises the CPU and UUID information in DMI pool, and also fills in the SVID/SSID of IDE controller.

4. Fixes the issue that Windows 98SE shows corrupt screen with ATI Radeon 9700 Pro.

5. Adds "Enhance PCI Performance" function to improve PCI RAID performance.

6. Fixes "Shutdown When CPU overheat" and "Shutdown When CPU FAN Fail" function failure under Windows 2000.

7. Changes ACPI Code to pass HCT ACPI test.

8. HPT374 BIOS version 1.22.

9. BIOS Compile Date: 12/03/2002.

1. Support Athlon XP 2400+, 2600+ CPU. Please be noted that Athlon XP 2400+ and 2600+ CPU need AMD certified heatsink; otherwise, the system will be quite unstable or even fail to boot up. Please check AMD recommended CPU cooler in following URL.  http://www.amd.com/gb-uk/Processors/ComputingSolutions/0,,30_288_1274_3734^4348^4356,00.html
2. Provide CPU multiplier up to 22X in SoftMenu.
3. Enhance DDR333 stability while "Enhance DRAM Performance" enabled.
4. Fix LAN transfer error in 72 hours continuous LAN test while CPU/DRAM = 100/133 and 100/166.
5. Support AMD new coming 333 CPU.
6. In case over clock the CPU frequency higher than 180MHz, don't press reset button otherwise the system will refuse to boot up. It's a auto protect mechanism to prevent possible hardware damage caused by abnormal working environment.
7. HPT 374 BIOS Version 1.21.
8. BIOS compile date: 9/9/2002.

1. First release.
2. HPT 374 BIOS Version 1.21.
3. BIOS compile date: 8/12/2002.

1. VIA 4in1 ServicePack
2. Win98/Me/2000/XP/2003
3. Ver 4.51
4. Installation Guide

1. HPT374 Driver version 1.23.  -**New**
2. For Win ME, Win2000, Win NT, Win XP.
   　

1. Support Athlon XP 2400+, 2600+ CPU. Please be noted that Athlon XP 2400+ and 2600+ CPU need AMD certified heatsink; otherwise, the system will be quite unstable or even fail to boot up. Please check AMD recommended CPU cooler in following URL.  http://www.amd.com/gb-uk/Processors/ComputingSolutions/0,,30_288_1274_3734^4348^4356,00.html
2. Provide CPU multiplier up to 22X in SoftMenu.
3. Enhance DDR333 stability while "Enhance DRAM Performance" enabled.
4. Fix LAN transfer error in 72 hours continuous LAN test while CPU/DRAM = 100/133 and 100/166.
5. Support AMD new coming 333 CPU.
6. In case over clock the CPU frequency higher than 180MHz, don't press reset button otherwise the system will refuse to boot up. It's a auto protect mechanism to prevent possible hardware damage caused by abnormal working environment.
7. HPT 374 BIOS Version 1.21.
8. BIOS compile date: 9/9/2002.

1. First release.
2. HPT 374 BIOS Version 1.21.
3. BIOS compile date: 8/12/2002.

1. First Release.
2. BIOS compile date: 05/25/2004

1. ABIT INTEL / VIA / Silicon Image 3112 / 3114 SATA DRIVERDISK
2. For Windows XP/ 2000/ 2003 IA32
3. v1.32

1. AMD Athlon 64 Processor Driver
2. For Windows XP
3. v1.1.0.1

1. Realtek Audio Driver AP v3.59

1. AMD Cool'n'Quiet™ Technology
2. For Windows 2000
3. v1.0.1.7

1. VIA 4in1 ServicePack
2. Windows 98/Me/2000/XP/2003
3. v4.51
4. Installation Guide

1. Realtek Audio Driver v3.59
2. For Windows 95/98

1. VT6122 LAN Chip Driver
2. For Windows 95/95OSR2/98SE/ ME/NT4/2000/XP
3. v2.20
4. Winsetup.txt

1. Realtek Audio Driver v3.59
2. For Windows 98SE / Me / 2000 / XP

1. Realtek Audio Driver v3.59
2. For NT4

1. VIA Hyperionpro 64
2. v096p2 beta

1. SATA 8237 2.20E
2. Readme.txt

1. ABIT µGuru v 2.1.1.5
2. For AA8, AG8, AS8, AV8

1. ABIT uGuru v 2.1.1.0
2. For AA8, AG8, AS8, AV8
3. Readme

1. Update awdflash.exe (Award BIOS Flash Utility) version to v8.22A.

1. AWDFLASH v8.24F is for ABIT KV7, KD7A, VI7, IS-50, VA-10, VA-11, IS-10 and IS-12 only.
2. For other ABIT motherboards launched before July 2003, use AWDFLASH v8.23K to update BIOS.
3. File size: 40982 Bytes
4. MD5(AWDFLASH.EXE)= d99df64b353f9a286a62601011e41caa
5. Release date: 8/11/2003

1. For ABIT motherboards launched before July 2003, use AWDFLASH v8.23K to update BIOS.
2. For ABIT KV7, KD7A, VI7, IS-50, VA-10, VA-11, IS-10, IS-12, and other motherboards launch after July 2003, use AWDFLASH v8.24F please.
3. File size: 40,420 Bytes
4. MD5(AWDFLASH.EXE)= 599f89f864254cc338e6ddb5320f143d

1. First release.
2. BIOS compile date: 4/24/2002

1. Updated CPU micro code.
2. Added new options 80C/85C/90C in "CPU Shutdown Temperature".
3. Changed the default setting of "CPU Warning Temperature" to 85C.
4. BIOS compile date: 07/15/2003.

1. Fixes issue where the Load Fail-Safe/Optimized Default, the setting of Drive A/Drive B/Floppy 3 Mode/Video/Halt On in Standard CMOS Features, would not return to defaults.
2. Fixes issue where the "Shutdown When CPU FAN Fail" option fails after about 16 minutes idling under Windows 2000/XP.
3. Fixes the incompatibility issue where the ATI Radeon 9700Pro fails to boot up with a certain power supply unit- TC-350P. With this power supply, 9700Pro will fail to boot, and the reset button needs to be pressed once to show the bootup screen.
4. HPT 372 BIOS Version 2.32. The RAID function is for BD7-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled when the RAID controller chip is not detected.
5. BIOS Compile Date: 11/12/2002

1. Willamette CPU will be automatically detected its FSB while Load Fail-Safe/Optimized Default in Bios Setup of SoftMenu.
   Fill in new CPU micro code (0F27).
2. Provide multiplier higher than 24x in SoftMenu.
3. Fix some CL=3 DDR400 memory modules fail to boot issue. (Both DDR333 and DDR400 modules can only work at DDR 266 owing to 845 chipset specification.)
4. Fix "CPU Shutdown Temperature" function failed under Win2K.
5. HPT 372 BIOS Version 2.32. The RAID function is for BD7-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
6. BIOS compile Date: 9/11/2002.

1. Modify the DMI data to fix on line diagnostic tool issue (PC Pitstop).
2. HPT 37x BIOS version 2.31. The RAID function is for BD7-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
3. BIOS compile date: 7/02/2002

1. Raise the adjustable CPU Core Voltage for 0.13 micron process P4 (Northwood).
2. Support Pentium 4 2.4G CPU.
3. Fix occasional no POST with debug code 26 issue while "Fixed PCI=33" option was enabled in Softmenu III.
4. Support P4 Celeron CPU.
5. HPT 37x BIOS version 2.31. The RAID function is for BD7-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
6. BIOS compile date: 5/02/2002

!!! Attention for upgrading BIOS!!! * When you upgrade bios to new bios included HPT 2.31 bios, we highly recommend you backup your system and data to an independent storage device first. New HPT 2.31 bios may corrupt original RAID configuration created on old bios occasionally. That means you may need to rebuild RAID configuration. If it happens, all the data on RAID-0 will be gone! * For RAID-1 user, please press "CTRL+H" to enter hpt37x setup.*Please upgrade HPT 2.31 driver before upgrade bios.

BIOS ID: 6H

1. Add" High Performance" option in " Load Optimized Defaults". "High Performance" option will use critical DDR memory timing settings to achieve high system performance, nevertheless, it may deviate the original settings from module SPD and cause system instability.
   
2. HPT 37x BIOS version 2.0.1024.The RAID function is for BD7-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.

BIOS ID: 4X

1. First release.
   
2. HPT 37x BIOS version 2.0.1024. The RAID function is for BD7-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.

1. Fixes the issue while S4 resumed, the MAC Address of onboard LAN chip can not correctly display.
2. Adds the following settings for "CPU Shutdown Temperature".
   1. 80C/176F
   2. 85C/185F
   3. 90C/194F
3. Changes the default setting of "CPU Warning Temperature".
4. Fixes the problem that if 'Land Boot Rom' setup to Enable, it would hang while resumed from S4 mode.
5. Revises the item help of "Shut down When CPU Fan Fail".
6. BIOS Compile Date: 6/17/2003.

1. First release.
2. BIOS Compile Date: 4/22/2003.
   　

1. Intel Application Accelerator
2. Multi-Language
3. OS: Windows NT 4.0, Windows 2000, Windows 98, Windows 98 SE, Windows Me, Windows XP Home Edition, Windows XP Professional
   
   

1. Audio Driver 3.50
2. Win98SE /Me/2000/XP.

1. Onboard Lan
2. Win98SE/WinMe/Win2000/WinXP ver.606
   
   
   

1. Intel Application Accelerator
2. English
3. OS: Windows NT 4.0, Windows 2000, Windows 98, Windows 98 SE, Windows Me, Windows XP Home Edition, Windows XP Professional
   

1. Audio Driver 3.502.
2. WinNT

1. Intel INF Update v5.02.10003
2. The Driver is for Windows* 2000, Windows* 98 SE, Windows* Me, Windows* XP Home Edition, Windows* XP Professional, Windows Server 2003

1. Audio Driver 3.50
2. Win95/98
   

1. USB 2.0 Driver
2. v2.1.2.1

1. Updated CPU micro code.
2. Added new options 80C/85C/90C in "CPU Shutdown Temperature".
3. Changed the default setting of "CPU Warning Temperature" to 85C.
4. BIOS compile date: 07/15/2003.

1. Fixes issue where the Load Fail-Safe/Optimized Default, the setting of Drive A/Drive B/Floppy 3 Mode/Video/Halt On in Standard CMOS Features, would not return to defaults.
2. Fixes issue where the "Shutdown When CPU FAN Fail" option fails after about 16 minutes idling under Windows 2000/XP.
3. Fixes the incompatibility issue where the ATI Radeon 9700Pro fails to boot up with a certain power supply unit- TC-350P. With this power supply, 9700Pro will fail to boot, and the reset button needs to be pressed once to show the bootup screen.
4. HPT 372 BIOS Version 2.32. The RAID function is for BD7-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled when the RAID controller chip is not detected.
5. BIOS Compile Date: 11/12/2002

1. Willamette CPU will be automatically detected its FSB while Load Fail-Safe/Optimized Default in Bios Setup of SoftMenu.
   Fill in new CPU micro code (0F27).
2. Provide multiplier higher than 24x in SoftMenu.
3. Fix some CL=3 DDR400 memory modules fail to boot issue. (Both DDR333 and DDR400 modules can only work at DDR 266 owing to 845 chipset specification.)
4. Fix "CPU Shutdown Temperature" function failed under Win2K.
5. HPT 372 BIOS Version 2.32. The RAID function is for BD7-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
6. BIOS compile Date: 9/11/2002.

1. Modify the DMI data to fix on line diagnostic tool issue (PC Pitstop).
2. HPT 37x BIOS version 2.31. The RAID function is for BD7-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
3. BIOS compile date: 7/02/2002

1. Raise the adjustable CPU Core Voltage for 0.13 micron process P4 (Northwood).
2. Support Pentium 4 2.4G CPU.
3. Fix occasional no POST with debug code 26 issue while "Fixed PCI=33" option was enabled in Softmenu III.
4. Support P4 Celeron CPU.
5. HPT 37x BIOS version 2.31. The RAID function is for BD7-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
6. BIOS compile date: 5/02/2002

!!! Attention for upgrading BIOS!!! * When you upgrade bios to new bios included HPT 2.31 bios, we highly recommend you backup your system and data to an independent storage device first. New HPT 2.31 bios may corrupt original RAID configuration created on old bios occasionally. That means you may need to rebuild RAID configuration. If it happens, all the data on RAID-0 will be gone! * For RAID-1 user, please press "CTRL+H" to enter hpt37x setup.*Please upgrade HPT 2.31 driver before upgrade bios.

BIOS ID: 6H

1. Add" High Performance" option in " Load Optimized Defaults". "High Performance" option will use critical DDR memory timing settings to achieve high system performance, nevertheless, it may deviate the original settings from module SPD and cause system instability.
   
2. HPT 37x BIOS version 2.0.1024.The RAID function is for BD7-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.

BIOS ID: 4X

1. First release.
   
2. HPT 37x BIOS version 2.0.1024. The RAID function is for BD7-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.

1. Update CPU Micro Code.
2. Add new options 80℃/85℃/90℃ in "CPU Shutdown Temperature".
3. Change the default setting of "CPU Shutdown Temperature" to 85℃.
4. BIOS compile date: 07/22/2003.

1. Fills MAC Address into UUID section in DMI data to pass WHQL.
2. Changes the definition of UUID in DMI data- move the MAC address from top to bottom of the string.
3. Fixes issue where the Shutdown When "CPU FAN Fail" option fails after about 16 minutes idling under Windows 2000/XP.
4. Fixes the compatibility issue where the ATI Radeon 9700 Pro fails to boot up with a certain power supply unit - TC-350P. With this power supply, the 9700 Pro will fail to boot up, requiring a reset button push to show the boot screen.
6. Shows "Hyper-Threading" wording on POST screen when Hyper-Threading CPU installed
7. HPT 372 BIOS Version 2.32. The RAID function is for BD7II-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled when the RAID controller chip is not detected.
8. BIOS Compile Date: 11/28/2002.

1. Fill in new CPU micro code (0F27).
2. HPT 372 BIOS Version 2.32. The RAID function is for BD7II-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
3. BIOS compile Date: 9/17/2002.

1. Upgrade the BIOS code for ICH4 to V1.5.
2. Fill in new CPU micro code (0F27).
3. Support PMC Pm49FL004T 4Mb Flash ROM.
4. Provide multiplier higher than 24x in SoftMenu.
5. Fix some CL=3 DDR400 memory modules fail to boot issue.(Both DDR333 and DDR400 modules can only work at DDR 266 owing to 845E chipset specification.)
6. Fix "CPU Shutdown Temperature" function failed under Win2K.
7. HPT 372 BIOS Version 2.32. The RAID function is for BD7II-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
8. BIOS compile Date: 8/26/2002.

1. Fix multimedia device lost issue with 533MHz FSB CPUs while load Fail-Safe / Optimized Default in BIOS.
2. Add SVID and SSID for ICH4 USB 2.0 controller.(SVID:147B,SSID:7402)
3. Load proper setting automatically for Willamette CPU when Load Fail-safe/Optimized Default in BIOS.
4. HPT 37x BIOS version 2.31. The RAID function is for BD7II-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
5. BIOS compile date: 7/23/2002.

1. Northwood CPU will be automatically detected its FSB while Load Fail-Safe/Optimized Default in BIOS Setup of SoftMenu.
2. Differentiate the USB 1.1 from USB 2.0 controller on PCI Device listing screen.
3. Fix Boot Agent failed to boot-up while enabled the Boot ROM in BIOS with hard disk on High-Point Port.
4. Modify the DMI data to fix on line diagnostic tool issue (PC Pitstop).
5. HPT 374 BIOS Version 1.21.
6. BIOS compile date: 7/02/2002

1. Add an option "Enhance DRAM Performance" in Advanced Chipset Features.

2. HPT 37x BIOS Version 2.31 The RAID function is for BD7II-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected

3. BIOS compile date: 5/3/2002.

!!!Attention for upgrading BIOS!!!
*When you upgrade bios to new bios included HPT 2.31 bios, we highly recommend you backup your system and data to an independent storage device first. New HPT 2.31 bios may corrupt original RAID configuration created on old bios occasionally. That means you may need to rebuild RAID configuration. If it happens, all the data on RAID-0 will be gone!
* For RAID-1 user, please press "CTRL+H" to enter hpt37x setup.
* Please upgrade HPT 2.31 driver before upgrade bios.

1. First release.
2. HPT 372 BIOS version 2.0.1024. The RAID function is for BD7II-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
3. BIOS compile date: 4/19/2002

1. Update CPU Micro Code.
2. Add new options 80℃/85℃/90℃ in "CPU Shutdown Temperature".
3. Change the default setting of "CPU Shutdown Temperature" to 85℃.
4. BIOS compile date: 07/22/2003.

1. Fills MAC Address into UUID section in DMI data to pass WHQL.
2. Changes the definition of UUID in DMI data- move the MAC address from top to bottom of the string.
3. Fixes issue where the Shutdown When "CPU FAN Fail" option fails after about 16 minutes idling under Windows 2000/XP.
4. Fixes the compatibility issue where the ATI Radeon 9700 Pro fails to boot up with a certain power supply unit - TC-350P. With this power supply, the 9700 Pro will fail to boot up, requiring a reset button push to show the boot screen.
6. Shows "Hyper-Threading" wording on POST screen when Hyper-Threading CPU installed
7. HPT 372 BIOS Version 2.32. The RAID function is for BD7II-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled when the RAID controller chip is not detected.
8. BIOS Compile Date: 11/28/2002.

1. Fill in new CPU micro code (0F27).
2. HPT 372 BIOS Version 2.32. The RAID function is for BD7II-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
3. BIOS compile Date: 9/17/2002.

1. Upgrade the BIOS code for ICH4 to V1.5.
2. Fill in new CPU micro code (0F27).
3. Support PMC Pm49FL004T 4Mb Flash ROM.
4. Provide multiplier higher than 24x in SoftMenu.
5. Fix some CL=3 DDR400 memory modules fail to boot issue.(Both DDR333 and DDR400 modules can only work at DDR 266 owing to 845E chipset specification.)
6. Fix "CPU Shutdown Temperature" function failed under Win2K.
7. HPT 372 BIOS Version 2.32. The RAID function is for BD7II-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
8. BIOS compile Date: 8/26/2002.

1. Fix multimedia device lost issue with 533MHz FSB CPUs while load Fail-Safe / Optimized Default in BIOS.
2. Add SVID and SSID for ICH4 USB 2.0 controller.(SVID:147B,SSID:7402)
3. Load proper setting automatically for Willamette CPU when Load Fail-safe/Optimized Default in BIOS.
4. HPT 37x BIOS version 2.31. The RAID function is for BD7II-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
5. BIOS compile date: 7/23/2002.

1. Northwood CPU will be automatically detected its FSB while Load Fail-Safe/Optimized Default in BIOS Setup of SoftMenu.
2. Differentiate the USB 1.1 from USB 2.0 controller on PCI Device listing screen.
3. Fix Boot Agent failed to boot-up while enabled the Boot ROM in BIOS with hard disk on High-Point Port.
4. Modify the DMI data to fix on line diagnostic tool issue (PC Pitstop).
5. HPT 374 BIOS Version 1.21.
6. BIOS compile date: 7/02/2002

1. Add an option "Enhance DRAM Performance" in Advanced Chipset Features.

2. HPT 37x BIOS Version 2.31 The RAID function is for BD7II-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected

3. BIOS compile date: 5/3/2002.

!!!Attention for upgrading BIOS!!!
*When you upgrade bios to new bios included HPT 2.31 bios, we highly recommend you backup your system and data to an independent storage device first. New HPT 2.31 bios may corrupt original RAID configuration created on old bios occasionally. That means you may need to rebuild RAID configuration. If it happens, all the data on RAID-0 will be gone!
* For RAID-1 user, please press "CTRL+H" to enter hpt37x setup.
* Please upgrade HPT 2.31 driver before upgrade bios.

1. First release.
2. HPT 372 BIOS version 2.0.1024. The RAID function is for BD7II-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
3. BIOS compile date: 4/19/2002

1. Please use flash utility AWDFLASH v8.24F to update BD7III BIOS.
2. Fixed some incorrect string in BIOS setup menu.
3. Change default year to 2004.
4. Update CPU micro code.
5. BIOS compile date: 02/18/2004.

1. Please use the AWDFLASH v8.24F flash utility to update the BD7-III BIOS.
2. Fixed a LAN issue after resuming from S4.
3. BIOS compile date: 11/03/2003

1. Please use the AWDFLASH v8.24F flash utility to update th e BD7-III BIOS.
2. First release.
3. BIOS compile date: 9/25/2003

1. Models:
   1. BD7III / BE7 / BE7II / BH-71
   2. IC7 / IC7-G / IC7-MAX3
   3. IS7 / IS7-E / IS7-E2 / IS7-G / IS7-M / IS7-V / IS7-V2
   4. KD7A / KV7 / VA-10 / VI7 / VT7
   5. NF7-S / NF7 / NF7-M
   6. NF7-S / NF7 v2.0
2. File size: 2.12MB
3. MD5sum: 39dd87a8672c34f930a0849a2de0e1e3
4. Please uninstall the Winbond Hardware Monitor before installing ABIT EQ.

1. Models:
   I. BD7III / BE7 / BE7II / BH-71 / BX7
   II. IC7 / IC7-G / IC7-MAX3
   III. IS7 / IS7-E / IS7-G / IS7-L / IS7-M / IS7-V
   IV. KD7A / KV7 / VA-10 / VI7 / VT7
   V. NF7-S / NF7 / NF7-M VI. NF7-S / NF7 v2.0
2. File size: 2.12MB
3. MD5sum: 8809909e3cc9b96115eb70b2ab897a8b
4. Please uninstall the Winbond Hardware Monitor before installing ABIT EQ.

1. Fix "CPU THRM-Throttling" function.
2. Fill in new CPU micro code (0F27).
3. Support Intel P4 Celeron 2.0G CPU.
4. Fix some CL=3 DDR400 memory modules fail to boot issue.(Both DDR333 and DDR400 modules can only work at DDR 266 owing to 845 chipset specification.)
5. Fix "CPU Shutdown Temperature" function failed under Win2K.
6. BIOS compile Date: 9/11/2002.

1. First Release.
2. Support Intel Pentium4 2.2AGHz CPU.

1. Adds support for Celeron II CPU 633 MHz and up to 700MHz .
2. Fixes the keyboard LED still on issue after shutting down the system under Windows operating system.

1. Supports PIII 750Mhz, 800Mhz,850Mhz(100Mhz FSB) CPUs and Celeron 667Mhz,700(66)Mhz CPUs.

1. Supports the Celeron 533A(66),566(66) and 600(66)Mhz CPUs.
   
2. Improves the power on funtion by mouse right/left botton after shoutting down the system under Win98SE.
   
3. Fixes the incorrect memory capacity issue under Linux.
   
4. Fixes the ACPI issue under Windows2000.
   
5. Improves the IRO assignment funtion.
   

1. Supports PIII 600Mhz(100Mhz FSB), 650(100Mhz FSB) and 700Mhz(100Mhz FSB) CPUs.
   
2. Updates HPT 366 BIOS to Rev. 1.21.

1. Supports the Celeron 533Mhz(66Mhz FSB) CPU.
   
2. Updates the BIOS or the HPT 366 controller to version 1.2.
   
3. Fixes the boot failure issue with SCO UNIX.
   
4. Fixes the system hang up issue when the ESCD record is incorrect.
   

1. Supports the PIII 600(100)Mhz CPU.
   
2. Supports Socket 370 Celeron 500 Mhz CPU.
   
3. Fixes the Y2K RTC problem.
   
4. Fixes the password function.
   
5. Improves the STD function.
   
6. Supports the A, EXT, C option.
   
7. Supports 40GB harddisks and above, However we aren't quite sure what the precise capacity is, since the current maximun harddisk on the market is 40GB.
   

1. First release.

1. Support Intel PIII / Celeron CPUs up to1.1G(100). (Please mention: This board does not support Tualatin core PIII / Celeron processors.)
   
2. HPT 366 BIOS version: 1.25.
   

BIOS ID: XU

1. Supports Celeron 800(100)MHz CPUs.
2. Supports FlashMenu.
3. HPT 366 BIOS version 1.25.

BIOS ID: VN

1. Add PCI/Latency timer function in PnP/PCI Configurations
   
2. Support Flash Menu.
   
3. HPT 366 BIOS verson 125.

BIOS ID: UH

1. Supports to PIII 1GHz CPU(133MHz FSB).
   

BIOS ID: SH

1. Supports Celeron 566(66),600(66),667(66),700(66)and PIII850(100),866(133) and 933(133) MHz CPUs.
   

BIOS ID: RV

1. Improves the 133 Mhz option in SoftMenu.
   
2. Fixes the hard disk detection failure issue when putting the CD ROM drive on IDE 1, and sets the boot sequence as CDROM first.
   
3. Fixes the incorrect memory capacity issue under Linux.
   
4. Fixes the HighPoint display problem with AHA-2940A and TNT AGP cards.
   
5. Fixes the Wake on Ring, Wake on Lan, and Wake on Alarm problems under Win98SE
   
6. Increases the CPU Warning Temperture funtion to solve Win98SE ShoutDown Problems when OEM CPU temperture is detected as too high.
   
   

BIOS ID: QJ

1. For users who try to overclock the FSB up to 133 Mhz, but fail when using some AGP video cards which can't run at that frequency in 2X mode.
   
2. Supports PIII CPUs up to 800MHz.
   
3. Increases SDRAM compatibility.
   
   

1. Supports I2C debug card.
   
2. Adds an AGP transfer mode for choosing AGP transfer mode.

1. Supports PIII 600Mhz(100Mhz FSB), 650Mhz(100Mhz FSB) and 700Mhz(100Mhz FSB) CPUs.
   
2. Updates HPT 366's BIOS to rev. 1.21.
   
3. Shows the correct frequency as set by User Define.

1. Solves the boot failure issue when switching the CPU to another one.
   
2. Solves the auto detection function while putting a CDROM on IDE 1 master.

1. First release.

BIOS ID: 71

1. Support Intel PIII/Celeron up to 1.1G(100) CPU.(Please mention: This board does not support Tualatin core P!!!/Celeron processors.)
   
2. HPT 370 BIOS version:0.95b.
   

BIOS ID: ZX

1. Support Intel Coppermine CPU.
   
2. Support Flashmenu utility.
   
3. HPT 370 BIOS version 095b.

BIOS ID: XV

1. Support Celeron 800 MHz(100) CPU.
   
2. Support Flash Menu.
   
3. HPT 370 BIOS verson 095b.
   
   

BIOS ID: VP

1. Support Celeron 633,733,766 MHz(66) CPU.
   
2. Add Idle/Pipeline DRAM Leadoff function in Advanced Chipset Feature
   
3. Add PCI/Latency timer function in PnP/PCI Configurations
   
4. Support Flash Menu.
   
5. HPT 370 BIOS verson 095b.
   
   
   

BIOS ID: UJ

1. Supports Celeron CPU up to 633MHz(66MHz FSB), and PIII CPUs up to 1GHz (133MHz FSB).
   
   

BIOS ID: SV

1. Supports PIII 850(100),866(133)MHz CPUs.
   
2. Fixes boot up failure issue on Coppermine PIII 800(133), Celeron 566(66)MHz CPU and above.
   
3. Changes I/O Voltage Default to +3.5V.
   
   

BIOS ID: RW

1. Supports Celeron 566(66),600(66),667(66) and 700(66)MHz CPUs.
   
2. Fixes the IrDA Function Failed issue under Win98SE
   This BIOS is for the BE6-II version 1.2 with the HPT 370 controller chip only!
   
   
   

BIOS ID: RP

1. First release.
   This BIOS is for the BE6-II version 1.2 with the HPT 370 controller chip only!

BIOS ID: 72

1. Support Intel PIII/Celeron up to 1.1G(100) CPU.(Please mention: This board does not support Tualatin core P!!!/Celeron processors.)
   
2. HPT 370 RAID BIOS verson 1.0.3b1.

BIOS ID: XK

1. Support Celeron 800MHz(100) CPU.
   
2. Supports FlashMenu.
   
3. HPT 370 RAID BIOS verson 1.0.3b1.

BIOS ID: VI

1. Support Celeron 633MHz(66) CPU.
   
2. Add Idle/Pipeline DRAM Leadoff option in BIOS.
   
3. Add PCI latency timer function in BIOS .
   
4. Fix displayed error in issue.
   
5. Support Flash Menu.
   
6. HPT 370 RAID BIOS verson 1.0.3b1.

BIOS ID: UK

1. First release.

1. Updated CPU micro code.
2. Added new options 80C/85C/90C in "CPU Shutdown Temperature".
3. Changed the default setting of "CPU Warning Temperature" to 85C.
4. BIOS compile date: 07/11/2003.

1. Systems can not detects the fan speed and automatically shut down while using low rotation speed fan.
2. Adjust the SP_LED as following to conform to the requirement:
   S0.........Always on
   S1........ Blink (faster frequency)
   S3.........Blink (slower frequency)If the LED could not support different blinking frequency, it would behave like S1 state.
   S4.........Always off
   S5.........Always off
3. Fix the multiplier of unlocked CPU shows incorrectly while resumed
   from STR.
4. Update CPU micro code.（0F24/18, 0F27/33, 0F29/0E）
5. HPT372 BIOS version 2.32
6. BIOS compile date 3/27/2003.

1. Fixes the compatibility issue where the ATI Radeon 9700 Pro fails to boot up with a certain power supply unit - TC-350P. With this power supply, the 9700 Pro will fail to boot up, requiring a reset button push to show the boot screen.
2. Changes the definition of UUID in DMI data- move the MAC address from top to bottom of the string.
3. Shows "Hyper-Threading" wording on POST screen when Hyper-Threading CPU installed.
4. HPT 372 BIOS Version 2.32.The RAID function is only for BE7-RAID. The BIOS is suitable for non-RAID boards and it will automatically disable HPT BIOS when non-RAID boards are recognized.
5. BIOS Compile Date: 11/28/2002.

1. MAC Address fills into UUID section in DMI data in order to pass WHQL.
2. Shows MAC Address of on board LAN Card in System Configuration section.
3. Shows "Award BIOS" on BIOS Setup Utility.(Used be "Work station BIOS")
4. Fixes Windows flash utility invalidity when using Hyper-Threading CPU.
5. Fixes issue where if the "Shutdown When CPU FAN Fail" option fails after about 16 minutes idling under Windows 2000/XP.
6. HPT 372 BIOS Version 2.32.The RAID function is only for the BE7-RAID. The BIOS is suitable for non-RAID boards and it will automatically disable the HPT BIOS when non-RAID boards are recognized.

1. First release.
2. HPT 372 BIOS Version 2.32. The RAID function is for BE7-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
3. BIOS compile Date: 9/05/2002.

1. Models:
   1. BD7III / BE7 / BE7II / BH-71
   2. IC7 / IC7-G / IC7-MAX3
   3. IS7 / IS7-E / IS7-E2 / IS7-G / IS7-M / IS7-V / IS7-V2
   4. KD7A / KV7 / VA-10 / VI7 / VT7
   5. NF7-S / NF7 / NF7-M
   6. NF7-S / NF7 v2.0
2. File size: 2.12MB
3. MD5sum: 39dd87a8672c34f930a0849a2de0e1e3
4. Please uninstall the Winbond Hardware Monitor before installing ABIT EQ.

1. Models:
   I. BD7III / BE7 / BE7II / BH-71 / BX7
   II. IC7 / IC7-G / IC7-MAX3
   III. IS7 / IS7-E / IS7-G / IS7-L / IS7-M / IS7-V
   IV. KD7A / KV7 / VA-10 / VI7 / VT7
   V. NF7-S / NF7 / NF7-M VI. NF7-S / NF7 v2.0
2. File size: 2.12MB
3. MD5sum: 8809909e3cc9b96115eb70b2ab897a8b
4. Please uninstall the Winbond Hardware Monitor before installing ABIT EQ.

1. Updated CPU micro code.
2. Added new options 80C/85C/90C in "CPU Shutdown Temperature".
3. Changed the default setting of "CPU Warning Temperature" to 85C.
4. BIOS compile date: 07/11/2003.

1. Systems can not detects the fan speed and automatically shut down while using low rotation speed fan.
2. Adjust the SP_LED as following to conform to the requirement:
   S0.........Always on
   S1.........Blink (faster frequency)
   S3.........Blink (slower frequency)If the LED could not support different blinking frequency, it would
                behave like S1 state.
   S4.........Always off
   S5.........Always off
3. Fix the multiplier of unlocked CPU shows incorrectly while resumed
   from STR.
4. Update CPU micro code.（0F24/18, 0F27/33, 0F29/0E）
5. BIOS Compile Date: 4/25/2003.
   　

BIOS ID: 10

1. First Release.
2. BIOS Compile Date: 12/17/2002.
   　

1. Updated CPU micro code.
2. Added new options 80C/85C/90C in "CPU Shutdown Temperature".
3. Changed the default setting of "CPU Warning Temperature" to 85C.
4. BIOS compile date: 07/11/2003.

1. Systems can not detects the fan speed and automatically shut down while using low rotation speed fan.
2. Adjust the SP_LED as following to conform to the requirement:
   S0.........Always on
   S1.........Blink (faster frequency)
   S3.........Blink (slower frequency)If the LED could not support different blinking frequency, it would
                behave like S1 state.
   S4.........Always off
   S5.........Always off
3. Fix the multiplier of unlocked CPU shows incorrectly while resumed
   from STR.
4. Update CPU micro code.（0F24/18, 0F27/33, 0F29/0E）
5. BIOS Compile Date: 4/25/2003.
   　

BIOS ID: 10

1. First Release.
2. BIOS Compile Date: 12/17/2002.
   

1. Updated CPU micro code.
2. Added new options 80C/85C/90C in "CPU Shutdown Temperature".
3. Changed the default setting of "CPU Warning Temperature" to 85C.
4. BIOS compile date: 07/11/2003.

1. Systems can not detects the fan speed and automatically shut down while using low rotation speed fan.
2. Adjust the SP_LED as following to conform to the requirement:
   S0.........Always on
   S1........ Blink (faster frequency)
   S3.........Blink (slower frequency)If the LED could not support different blinking frequency, it would behave like S1 state.
   S4.........Always off
   S5.........Always off
3. Fix the multiplier of unlocked CPU shows incorrectly while resumed
   from STR.
4. Update CPU micro code.（0F24/18, 0F27/33, 0F29/0E）
5. HPT372 BIOS version 2.32
6. BIOS compile date 3/27/2003.

1. Fixes the compatibility issue where the ATI Radeon 9700 Pro fails to boot up with a certain power supply unit - TC-350P. With this power supply, the 9700 Pro will fail to boot up, requiring a reset button push to show the boot screen.
2. Changes the definition of UUID in DMI data- move the MAC address from top to bottom of the string.
3. Shows "Hyper-Threading" wording on POST screen when Hyper-Threading CPU installed.
4. HPT 372 BIOS Version 2.32.The RAID function is only for BE7-RAID. The BIOS is suitable for non-RAID boards and it will automatically disable HPT BIOS when non-RAID boards are recognized.
5. BIOS Compile Date: 11/28/2002.

1. MAC Address fills into UUID section in DMI data in order to pass WHQL.
2. Shows MAC Address of on board LAN Card in System Configuration section.
3. Shows "Award BIOS" on BIOS Setup Utility.(Used be "Work station BIOS")
4. Fixes Windows flash utility invalidity when using Hyper-Threading CPU.
5. Fixes issue where if the "Shutdown When CPU FAN Fail" option fails after about 16 minutes idling under Windows 2000/XP.
6. HPT 372 BIOS Version 2.32.The RAID function is only for the BE7-RAID. The BIOS is suitable for non-RAID boards and it will automatically disable the HPT BIOS when non-RAID boards are recognized.

1. First release.
2. HPT 372 BIOS Version 2.32. The RAID function is for BE7-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
3. BIOS compile Date: 9/05/2002.

1. Updated CPU micro code.
2. Added new options 80C/85C/90C in "CPU Shutdown Temperature".
3. Changed the default setting of "CPU Warning Temperature" to 85C.
4. BIOS compile date: 07/11/2003.

1. Systems can not detects the fan speed and automatically shut down while using low rotation speed fan.
2. Adjust the SP_LED as following to conform to the requirement:
   S0.........Always on
   S1.........Blink (faster frequency)
   S3.........Blink (slower frequency)If the LED could not support different blinking frequency, it would
                behave like S1 state.
   S4.........Always off
   S5.........Always off
3. Fix the multiplier of unlocked CPU shows incorrectly while resumed
   from STR.
4. Update CPU micro code.（0F24/18, 0F27/33, 0F29/0E）
5. BIOS Compile Date: 4/25/2003.
   　

BIOS ID: 10

1. First Release.
2. BIOS Compile Date: 12/17/2002.
   

SATA driver disk V1.2

1. Add notification when none 80-wire cable is installed.
2. Enhance compatibility with certain Power Supply.
3. Update CPU Micro code.
4. BIOS compile date: 05/24/2004

1. Changed the default year to 2004.
2. Support for Prescott CPUs up to 2.4G/533/1M L2 cache (FSB 800 Prescott is out of chipset specification and is, therefore, not supported).
3. BIOS compile date: 03/02/2004.

1. Models:
   1. BD7III / BE7 / BE7II / BH-71
   2. IC7 / IC7-G / IC7-MAX3
   3. IS7 / IS7-E / IS7-E2 / IS7-G / IS7-M / IS7-V / IS7-V2
   4. KD7A / KV7 / VA-10 / VI7 / VT7
   5. NF7-S / NF7 / NF7-M
   6. NF7-S / NF7 v2.0
2. File size: 2.12MB
3. MD5sum: 39dd87a8672c34f930a0849a2de0e1e3
4. Please uninstall the Winbond Hardware Monitor before installing ABIT EQ.

1. Models:
   I. BD7III / BE7 / BE7II / BH-71 / BX7
   II. IC7 / IC7-G / IC7-MAX3
   III. IS7 / IS7-E / IS7-G / IS7-L / IS7-M / IS7-V
   IV. KD7A / KV7 / VA-10 / VI7 / VT7
   V. NF7-S / NF7 / NF7-M VI. NF7-S / NF7 v2.0
2. File size: 2.12MB
3. MD5sum: 8809909e3cc9b96115eb70b2ab897a8b
4. Please uninstall the Winbond Hardware Monitor before installing ABIT EQ.

1. Support Intel PIII / Celeron CPUs up to1.1G(100). (Please mention: This board does not support Tualatin core PIII / Celeron processors.)
   
2. HPT 366 BIOS version: 1.25.
   

BIOS ID: XU

1. Support Celeron 800MHz(100) CPU.
   
2. Support Flash Menu.

BIOS ID: UH

1. Supports to PIII 1GHz CPU(133MHz FSB).

BIOS ID: SH

1. Supports Celeron 566(66),600(66),667(66),700(66)and PIII850(100),866(133) and 933(133) MHz CPUs.

BIOS ID: RV

1. Improves the 133 Mhz option in SoftMenu.
   
2. Fixes the hard disk detection failure issue when putting the CD ROM drive on IDE 1, and sets the boot sequence as CDROM first.
   
3. Fixes the incorrect memory capacity issue under Linux.
   
4. Fixes the HighPoint display problem with AHA-2940A and TNT AGP cards.
   
5. Fixes the Wake on Ring, Wake on Lan, and Wake on Alarm problems under Win98SE .
   
6. Improve the CPU Warning Temperture funtion to solve Win98SE shout down problem that OEM CPU temperture was detected too high.

BIOS ID: QJ

1. For users who try to overclock the FSB up to 133 Mhz, but fail when using some AGP video cards which can't run at that frequency in 2X mode.
   
2. Supports PIII CPUs up to 800MHz.
   
3. Increases SDRAM compatibility.

1. Supports I2C debug card.
   
2. Adds an AGP transfer mode for choosing AGP transfer mode.

1. Supports PIII 600Mhz(100Mhz FSB), 650Mhz(100Mhz FSB) and 700Mhz(100Mhz FSB) CPUs.
   
2. Updates HPT 366's BIOS to rev. 1.21.
   
3. Shows the correct frequency as set by User Define.

1. Solves the boot failure issue when switching the CPU to another one.
   
2. Solves the auto detection function while putting a CDROM on IDE 1 master.
   

1. First release.

BIOS ID: BC

1. Fixes the issue that Intel Celeron 2G can not show the correct CPU ID/uCode ID and Cache size.
2. Modify to support up to 3.0 multiplier frequency.
3. The CPU type of Northwood and Celeron will be automatically recognized while loading optimized and fail-safe default.
4. The multiplier frequency opens for adjusting while use "user define" option.
5. BIOS Compile Date: 12/18/2002
   　

1. Fix PS/2 mouse can't work after waken from S4 mode while USB keyboard/mouse installed together.
2. BIOS compile date: 7/19/2002.

1. First release.
2. BIOS compile date: 7/12/2002

1. Fixed the problem that when using some DRAM system will hang at post code A2.
2. Update CPU micro code.
3. Revise CPU Warning Temperature.
4. Revise CPU Shutdown Temperature.
5. BIOS compile date: 09/01/2003.

BIOS ID: D4

1. Show MAC Address of on board LAN Card in System Configuration section.
2. Change the definition of UUID in DMI data- move the MAC address from top to bottom of the string.
3. Revise DMI Pool data.
4. BIOS Compile Date: 12/16/2002

1. Fixes the incompatibility issue where the ATI Radeon 9700Pro fails to boot up with a certain power supply unit- TC-350P. With this power supply, 9700Pro will fail to boot, and the reset button needs to be pressed once to show the bootup screen.

2. Fixes issue where the "Shutdown When CPU FAN Fail" option fails after about 16 minutes idling under Windows 2000/XP.

3. Adds functions to SoftMenu III.
   A.   Auto detects CPU speed. It offers User Define and CPU frequency in CPU Operation Speed option.
   B.   CPU frequency locks up for Northwood CPU. It would not
          allow users to choose multiplier factor but shows CPU
          multiplier factor on it.
   C.   CPU Operation Speed in SoftMenu III reveals CPU frequency
          when user load defaults.

4. Fixes issue where ES North Wood 2.8G CPU detection fails.

5. BIOS compile Date: 11/14/2002.

1. Support Celeron 2.0G CPU.
2. Provide multiplier higher than 25x in SoftMenu.
3. Fill in new CPU micro code (0F27).
4. "Speed Error Hold"  function set to invisible.
5. Add "Disable Unused PCI Clock" function in Advanced BIOS Features that manages the Clock function on PCI slot.
6. Fix S3 Compliance failed while testing HCT 10.0 under Win XP.
7. BIOS compile date: 9/23/2002.

1. Support PMC PM49FL004T Flash ROM.
2. Support Winbond W39V040FA Flash ROM.
3. Modify boot issue of Mushkin DDR 400 module.
4. BIOS compile Date: 8/23/2002.

1. Support P4 2.8GHz (533MHz FSB) CPU. (CPU ID 0F27 Micro Code)
2. Add SVID and SSID for ICH4 USB 2.0 controller.(SVID:147B,SSID:7403)
3. BIOS compile date: 8/09/2002

1. Update VGA BIOS to 2656.
2. Enhance the DDR SDRAM setting table in "Advanced Chipset Feature".
3. Add "Enhance DRAM Performance" function.
4. Modify the DMI data to fix on line diagnostic tool issue (PCI Pitstop).
5. Set "Video RAM Cacheable", "AGP Data Transfer Rate", "AGP Aperture Size", "AGP Data Rate" and "AGP Enable" function to invisible while using OnBoard VGA card.
6. Hide "On-Chip Frame Buffer Size" option while using AGP Card.
7. BIOS compile date: 6/26/2002.
8. Please use AWDFLASH Ver. 8.20A to flash BIOS 94. We have include the program in BG794.EXE, but if you get the bg7_94.bin only and you are using AWDFLASH Ver. 7.97D, apply below special switches please. "AWDFLASH KG7_94.BIN /PY /SN /CD /CP /CC /F"

1. First release.
2. BIOS compile date: 5/03/2002

1. Updated CPU micro code.
2. Revised CPU Warning Temperature.
3. Revised CPU Shutdown Temperature.
4. BIOS compile date: 10/14/2003.
   

1. Fix the problem that MultiMedia device disappeared while using 533 FSB CPU after into BIOS to load default and save BIOS.
2. BIOS Compile Date: 4/25/2003.

BIOS ID: D5

1. Raise the upper limit of CPU core voltage to 1.85V.
2. Fix the booting failure issue when the system starts up from "CMOS checksum error" and without CPU fan attached to FAN2 header.
3. HPT 374 BIOS Version 1.22.
4. BIOS Compile Date: 12/16/2002.

BIOS ID:  CA

1. Fixes the incompatibility issue where ATI Radeon 9700Pro fails to boot up with a certain power supply unit -TC-350P. With this power supply, 9700Pro will fails to boot and the reset button needs to be pushed in order to show the bootup screen.

2. Fixes issue where the "Shutdown When CPU FAN Fail" option fails after about 16 minutes idling under Windows 2000/XP.

3. Adds functions in SoftMenu III.
   A.   Auto detects CPU speed. It offers User Define and CPU frequency in CPU
          Operation Speed option.
   B.   CPU frequency locks up for Northwood CPU. It would not allow users to choose
          multiplier factor but shows the CPU multiplier factor.
   C.   CPU Operation Speed in SoftMenu III reveals CPU frequency while user load defaults.

4. Fixes issue where ES Northwood 2.8G CPU is not detected automatically.

5. SP-LED blanks when system enters suspend mode.

6. BIOS Compile Date: 11/25/2002.

1. First Release.
2. BIOS Compile Date: 10/02/200.

1. First release.
2. BIOS compile date: 4/24/2002

1. Synchronize CPU Warning Temperature with ABIT EQ.
2. Fixed the issue that the CPU over temperature will start warning at 55 degrees if CPU Warning Temperature is set to 50 degrees.
3. BIOS compile date: 02/16/2004.

1. Changed the default setting of "Power on by Ring" to disabled.
2. BIOS Compile date: 7/14/2003.

1. First release.
2. BIOS Compile Date: 7/14/2003.

1. Models:
   1. BD7III / BE7 / BE7II / BH-71
   2. IC7 / IC7-G / IC7-MAX3
   3. IS7 / IS7-E / IS7-E2 / IS7-G / IS7-M / IS7-V / IS7-V2
   4. KD7A / KV7 / VA-10 / VI7 / VT7
   5. NF7-S / NF7 / NF7-M
   6. NF7-S / NF7 v2.0
2. File size: 2.12MB
3. MD5sum: 39dd87a8672c34f930a0849a2de0e1e3
4. Please uninstall the Winbond Hardware Monitor before installing ABIT EQ.

1. Models:
   I. BD7III / BE7 / BE7II / BH-71 / BX7
   II. IC7 / IC7-G / IC7-MAX3
   III. IS7 / IS7-E / IS7-G / IS7-L / IS7-M / IS7-V
   IV. KD7A / KV7 / VA-10 / VI7 / VT7
   V. NF7-S / NF7 / NF7-M VI. NF7-S / NF7 v2.0
2. File size: 2.12MB
3. MD5sum: 8809909e3cc9b96115eb70b2ab897a8b
4. Please uninstall the Winbond Hardware Monitor before installing ABIT EQ.

BIOS ID: SS

1. Supports Celeron 633(66),667(66),700(66)MHz CPUs.
   

BIOS ID: QN

1. Fixes the incorrect memory capacity issue under Linux.
   
2. Fixes the ACPI issue under Windows 2000
   
3. Supports Celeron 533a(66),566(66)and 600(66) MHz CPUs.
   

BIOS ID: NV

1. Supports the PIII 600Mhz(100Mhz FSB) CPU.
   
2. Supports 40GB harddisks and above, However we aren't quite sure what the precise capacity is, since the current maximun harddisk on the market is 40GB.
   

BIOS ID: LN

1. Fixes the Y2K RTC problem.
   
2. Supports Socket 370 Celeron 500 Mhz CPU.
   
3. Improves the IRQ assignment function.
   
4. Improves the TURBO FREQUENCE function in CPU SoftMenu section.
   
5. Fixes the password function.

BIOS ID: LH

1. Supports the socket 370 Celeron 466 Mhz CPU.
   
2. Supports the PIII 550Mhz CPU.

BIOS ID: KJ

1. Revises the BIOS to pass the Year 2000 RTC Rollover test.
   
2. Supports the Socket 370 Celeron 466 Mhz CPU.
   
3. This BIOS can not pass the critical CMOS reading and writing test in PCCHECK.EXE. It will be ready in the next BIOS.

BIOS ID: KG

1. Supports the PIII CPU Processor Serial Number function, it's called Processor Number Feature in the BIOS Features Setup section.
   
2. Supports assigned manual PCI IRQ in the PCI Onbard section.

BIOS ID: JJ

1. Supports Socket 370 Celeron 433 MHz CPU
   
2. Supports correct naming of Pentium III CPU.

BIOS ID: HN

1. Fixes NEC ATAPI ZIP drive incompatibility problem.
   
2. Supports Intel Pentium III 450 and 500 Mhz Katmai CPU.
   
3. Supports Intel Celeron 366 Mhz CPU option, up to 400 Mhz compliance.
   
4. Supports the clock multiplier up to 8 times.
   
5. Solves the problem of Windows98 not being able to shut-down properly when the ACPI function is enabled.
   
6. Supports DMI 2.3 . You have to input /CD parameter to Clear DMI pool data while updating the BIOS.
   

EXTRA NOTE:

For Pentium III (Katmai) users, the BIOS will indicate PII EVEN if it is a PIII because the code was finished just prior to the unveiling of the new PIII name for the Katmai. This will be corrected in the next BIOS.

BIOS ID: GY

1. Updates the K/B default setting to 8Mhz to fix Microsoft Elite K/Bs.
   
2. Changes the ACPI default setting to disable.

BIOS ID: FU

1. Supports ACPI function.
   
2. When upgrading to the BH6 FU BIOS, please use AWDFLASH.EXE 6.6 to avoid upgrade failure.

BIOS ID: FL

1. Supports the Celeron 300 and 333 CPUs with built-in cache.
   
2. The BH6 uses 2M EEPRAM, please use the AWDFLASH.EXE 6.22 version (or newer) for upgrades.
   
   

BIOS ID: SP

1. Supports the Celeron566(66),600(66),667(66),700(66)MHz CPUs, and PIII 750(100),800(100)MHz,850(100)MHz CPUs.
   
   

BIOS ID: QM

1. Shows memory larger than 64MB accurately in Linux.
   
2. Solves the problem of Windows 2000 not being able to shut down properly when the ACPI function is enabled.
   
3. Allows for accurate recognition of I740 VGA cards.
   
   

BIOS ID: PM

1. Supports the PIII 600Mhz(100Mhz FSB), 650Mhz(100Mhz) and 700Mhz(100Mhz) CPUs.