|
|
| You may want to know:
How to update the bios? Please click here.
Besides downloading the bios file, you also need the Flash Utility to flash bios rom. (For files before Aug 2001)
- CPU support list
- For more FAQs about BIOS relationship, click here please.
- You won't need to update BIOS until the latest bios has improve / fix some functions.
- You won't need to upgrade through all of the BIOS files, just upgrade to the latest one please and it will include all previous improvments.
- The CMOS data will be lost after flashing the BIOS. You may need to enter the BIOS setup screen and configure your system information after rebooting the machine.
| Motherboard>Socket A>NF7-S
This BIOS upgrade is for NF7-S V1.x only.
For NF7-S V2.0, please click
here.
For your motherboard's version number, please click here
. |
|
| Bios Issue Date:2004/09/10 | | BIOS ID:28 | |
- Hid "CPU Disconnect function" default to AUTO.
- BIOS compile date: 09/10/2004
|
| Bios Issue Date:2004/08/20 | | BIOS ID:27 | |
- Supports AMD Sempron CPUs.
- BIOS compile date: 08/20/2004
|
| Bios Issue Date:2004/07/07 | | BIOS ID:26 | |
- Revised wording of "OnChip VGA ROM file" Item.
- BIOS compile date: 07/07/2004
|
| Bios Issue Date:2004/04/22 | | BIOS ID:25 | |
- Please use AWDFLASH
8.23D or later to update NF7 series BIOS. With incorrect AWDFLASH version,
the GUID will be erased, and leads to IEEE1394 peer to peer function failed.
AWDFLASH 8.23K is included in this BIOS package.
- Fixed an issue where the PS/2 wheel mouse does not respond under certain
conditions:
- Using certain PS/2 wheel mice and certain USB keyboards.
- PS/2 wheel mouse works fine but loses response on 1st, 3rd, 5th....
time restarting windows. However, it works fine on the 2nd, 4th.... windows
restart.
- For "PS/2 wheel mouse + PS/2 keyboard" and "USB wheel
mouse + USB keyboard ", there no problems at all.
- Supports AWDFLASH.EXE V8.32.
- BIOS compile date: 04/22/2004
|
| Bios Issue Date:2004/03/18 | | BIOS ID:24 | |
- Please use the AWDFLASH
8.23D or later to update NF7 series BIOS. With incorrect AWDFLASH version,
the GUID will be erased, which leads to IEEE1394 peer to peer function failure.
AWDFLASH 8.23K is included in this BIOS package.
- Updated SATA BIOS to v4.2.47 (FOR NF7-S ONLY).
- Enhanced USB 2.0 device compatibility, "Integrated Peripherals / OnChip
PCI Device / USB 2.0 Device Compatible / Disabled -> Enabled".
- Added Auto-Shutdown function when CCMOS jumper is on pin 2-3. The correct
CCMOS jumper should be on pin 1-2; in case it is placed at 2-3, the CPU core
voltage will be abnormally high, and the system will shut down automatically
to protect the CPU from damage.
- Fixed an issue where DOS 6.22 can't boot up on SATA HDD without a PS/2 mouse
installed.
- Added "SATA ROM ROM: Enabled / Disabled" option to improve SCSI
card compatibility.
- Changed the default year to 2004.
- BIOS compile date: 03/18/2004.
|
| Bios Issue Date:2003/11/28 | | BIOS ID:23 | |
- Please use AWDFLASH
8.23D or later to update the NF7 series BIOS. With an incorrect AWDFLASH
version, the GUID will be erased, leading to IEEE1394 peer to peer function
failure. AWDFLASH 8.23K is included in this BIOS package.
- Fixed the issue where the Duron 1.2G and 1.3G will not boot using BIOS
version 22.
- Added NVIDIA System Utility support.
- Please note that only basic functions are supported.
- Please download the nvsuoem.ini file and install the NVIDIA System Utility
with this ini file (put the ini file in the directory where the setup up file
for NVIDIA System Utility is located).
- Enhanced compatibility with certain WD hard disks.
- BIOS compile date: 11/28/2003.
|
| Bios Issue Date:2003/10/13 | | BIOS ID:22 | |
- Please use AWDFLASH
8.23D or later to update NF7 series BIOS. With incorrect AWDFLASH version,
the GUID will be erased, and leads to IEEE1394 peer to peer function failed.
AWDFLASH 8.23K is included in this BIOS package.
- Add Duron FSB266 1400MHz/1600MHz/1800MHz CPU support. This BIOS does not
support old Duron 1.2G and 1.3G. Users using these two CPU, please do not
upgrade to this version.
- Fixed when using NF7-M, the BIOS will have checksum error at certain circumstances.
- Improve NF7-M DRAM compatibility when using on-board VGA function.
- Remove "An Energy Star Ally" string at boot up.
- BIOS compile date: 10/13/2003.
|
| Bios Issue Date:2003/07/24 | | BIOS ID:21 | |
- Updated BPL to v3.09 according to NVidia's recommendation.
- Fixed the problem that system hangs up with POST code 01 while resuming
from STR mode with user defined DRAM timings. With default SPD setting, no
problem at all and doesn't need this update.
- Fixed the problem that system hangs up at POST code FF with over clocking
setting- change the multiplier factor from CPU default to 19.
- Fixed the problem that Barton 2500+ CPU is occasionally detected as Barton
3200+. If 400 FSB CPU is installed, users need to select correct CPU type in SoftMenuIII by themselves.
- BIOS Compile date: 7/24/2003.
|
| Bios Issue Date:2003/07/02 | | BIOS ID:20 | |
- Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With
incorrect AWDFLASH version, the GUID will be erased, and leads to IEEE1394
peer to peer function failed. AWDFLASH 8.23K is included in this BIOS
package.
- Fixed the exclamation point under Motherboard Resources of Device
manager in Windows XP when use USB keyboard/mouse and set as "Support
via BIOS".
- Fixed the intermittent sirens when getting into Windows 2000 or XP
with both "Shutdown when CPUFAN Fail" and "CPU Shutdown
Temperature " enabled in PC Health Status.
- Calibrated the readings of "CPU Over Temp. Protect" option
in SoftMenu™ III.
- Fixed the problem that SATA BIOS string is wrongfully connected with
PCI add on card BIOS.
- Fixed system freeze problem in S-ATA BIOS initial while using display
card on PCI slot.
- Fixed the problem if FAN speeded too slow, system would hang at BIOS
screen or at watching the status in PC health Status screen.
- BIOS Compile Date: 7/2/2003.
|
| Bios Issue Date:2003/05/13 | |
- Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With
incorrect AWDFLASH version, the GUID will be erased, and leads to IEEE1394
peer to peer function failure. AWDFLASH 8.23K is included in this BIOS
package.
- Fixed CPU temperature too high issue.
- Raised highest CPU FSB up to 300 MHz for "user define mode" in
SoftMenu.
- Fixed SATA RAID-0 data corruption issue by adding a new option
"EXT-P2P's Discard Time" in "integrated Peripherals". The default
setting is "30 us" ; which is recommended by NVidia. In case the problem is
still there, try "1 ms" please.
- BIOS Compile Date: 5/13/2003.
|
| Bios Issue Date:2003/04/10 | | - Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With incorrect
AWDFLASH version, the GUID will be erased, and leads to IEEE1394 peer to peer
function failed. AWDFLASH 8.23K is included in this BIOS package.
- Changed SSID of NF7-M and NF7 to "1C01" and "1C02" respectively.
- Changed default setting of "Floppy A" to "1.44M, 3.5in." after fail- safe
default loaded.
- Adds auto-detect function of "Dual Channel DDR". The DDR modules should be
installed in DIMM-3 and DIMM-2.
- Fixed system instability issue when a PCI card installed in PCI-4 and in
Windows 2000 environment.
- BIOS Compile Date: 4/10/2003
|
| Bios Issue Date:2003/03/27 | | BIOS ID:17 | |
- Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With
incorrect AWDFLASH version, the GUID will be erased, and leads to
IEEE1394 peer to peer function failed. AWDFLASH 8.23D is included in
this BIOS package.
- Change the write-protection mechanism of Flash ROM programming.
- Support Thorton, Throughbred, Barton 2600+ CPU.
- The default value on DRAM Ration changes to"Auto".
- Added "CPU Disconnect Function" option on chipset to turn on/off C1
disconnect.
- The CPU frequency 1917Mhz revised to 1916MHz.
- DMI Pool data shows to"socket A".
- The default value of "Memory Timings" revises to "Optimal".
- Fix the problem that system can not detect USB Device under WinME while
resume from S3,S4 mode, and lead to usb connector failed.
- Fix system can not show fan speed in PC Health Status while using lower
speed FAN.
- Add"IDE Bus Master" function to improve transfer speed of GHOST, and
default value set up to disabled.
- Fix the problem while disabled"IDE Controller", and truned off IDE
Controller, it would fail to share IRQ 14, 15;thus, IDE Controller would NOT
be turned off, it would show "IDE Controller"IRQ to be "NA" in PCI list.
- Provides"AGP aperture size" option for NF7-M, while use on chip VGA.
- BIOS compile date: 3/27/2003.
|
| Bios Issue Date:2003/02/27 | | BIOS ID:16
- Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With incorrect
AWDFLASH version, the GUID will be erased, and leads to IEEE1394 peer to peer
function failure. AWDFLASH 8.23D is included in this BIOS package.
- Update on chip VGA BIOS to v4.1F.00.07.13 (for NF7-M only).
- Fixes share memory allocation issue for NF7-M when AGP card installed.
- Fixes fail to create DMI Pool data when CPUID=064X CPU installed.
- Fixes booting failure issue for Corsair TwinX-3200LL and CMX256A-3200LL
memory modules.
- Revises the DDR frequency reading during POST.
- Update on board Serial ATA BIOS to v4.2.12 (for NF7-S only). Please also
update Serial ATA driver to 1.0.0.28.
- Disables power button temporarily when updating BIOS. This is to protect
BIOS data from corruption if pushing power button during BIOS flashing.
- Fix the problem that CPU core voltage reading is a little lower in PC Health
page; meanwhile, the Hardware Monitoring tool needs to be updated to "HWM_NF7V16.EXE"
together with BIOS update.
- Correct the "Battery Voltage" wording to "3.3V Dual Voltage"
in PC Health; meanwhile, the Hardware Monitoring tool needs to be updated
to "HWM_NF7V16.EXE"
together with BIOS update.
- Change the maximum CPU FSB from 200 to 250 MHz in SoftMenu.
- BIOS Compile Date: 2/27/2003.
|
| Bios Issue Date:2003/01/22 | | BIOS ID:15
- Please use AWDFLASH 8.23D or later to update the NF7 series BIOS.With the
incorrect AWDFLASH version, the GUID will be erased, and will lead to IEEE1394
peer to peer function failure. AWDFLASH 8.23D is included in this BIOS
package.
- First release for NF7/NF7-S/NF7-M V1.2 board.
- It shows real frequency of CPU while POST after bios checksum error or
setup CPU speed as "User Define".
- It shows real frequency of memory rather than DDR 266/333 while POST after
bios checksum error or setup CPU speed as "User Define".
- Remove IRQ9 item from IRQ Resources because it is occupied by ACPI
controller.
- Revise the issue of OnBoard VGA ROM displays "Engineering...".
- BIOS Compile Date: 1/22/2003.
|
| Bios Issue Date:2003/01/07 | | BIOS ID: 13
- Please use AWDFLASH 8.23D or later to update NF7 series BIOS.
With incorrect AWDFLASH version, the GUID will be erased, and leads to
IEEE1394 peer to peer function failed. AWDFLASH 8.23D is included in this BIOS
package.
- Revise the CPU Interface Table for 333FSB CPU.
- Correct the CPU Temperature misreading issue. With BIOS V1.0, 1.1,and V1.2,
the CPU temperature reported in BIOS is too hight. V1.3 BIOS fixes it and
report correct CPU temperature; meanwhile, the Hardware Monitoring tool needs
to be updated to "HWM_NF7V13.EXE"
together with BIOS update.
- Change default year to 2003.
- Update SiliconImage Sil3112A BIOS to v4.2.00.
- Add new function- Shutdown when CPU FAN fail.
- Revise function- "CPU shutdown temperature" and "CPU Warning
Temperature".
- Fix Windows XP fail to shutdown when "USB support" is set to "By BIOS".
- Support AMD 333 FSB Barton CPU.
- BIOS Compile Date: 01/07/2003.
|
| Bios Issue Date:2002/11/30 | | BIOS ID: 12
-
Please use AWDFLASH 8.23D or later to update NF7 series
BIOS. With an incorrect AWDFLASH version, the GUID will be erased, leading to
IEEE1394 peer to peer function failure. AWDFLASH 8.23D is included in this BIOS
package.
-
Fixes the booting failure issue (02h) caused by special
operation.
A. Discharging CMOS data --> power on --> pushing "F1" key to
continue
B. Discharging CMOS data --> power on --> pushing "Del" key to
enter BIOS setup --> Exit without saving
C. Discharging CMOS data --> power on --> pushing "Del" key to
enter BIOS setup --> power off --> power on
-
Fixes the booting failure issue (8Dh) when below conditions
exist simultaneously.
- HDD attached to IDE-1
- HDD attached to S-ATA-2
- CDROM attached to IDE-2
- First boot --> S-ATA
-
Revises DMI Pool data.
-
BIOS Compile Date: 11/29/2002.
|
| Bios Issue Date:2002/11/25 | | BIOS ID: 11
- Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With
an incorrect AWDFLASH version, the GUID will be erased, leading to
IEEE 1394 peer-to-peer function failure. AWDFLASH 8.23D is included
with this BIOS package.
- The default of "Enhance PCI Performance" option set up to disabled.
- Init Display Fist item revised to AGP.
- Update Sil BIOS to 4.1.36C.
- Update BPL ROM file to 2.72.
- USB can't assign IRQ when cards are installed on PCI
Slot2 / Slot 3.
- Fixes issue where Keyboard98 is selected, the Keyboard Wake Up key can't wake up the system.
- Fixes system resume failed, and hanged at 01h issue after S0->S3->S0->S3->S0.
- MAC Address fills into UUID. Fill in from the first till the sixth byte, if the seventh to sixteenth are not filled in with certain numbers, fill "00" or reserve the original.
- BIOS compile Date: 11/14/2002.
|
| Bios Issue Date:2002/11/04 | | BIOS ID: 10
- First release.
- BIOS compile Date: 11/04/2002.
|
|
|
|