1. Updated CPU micro code.
2. Added adjustable MAX & MIN multiplier item for certain retail INTEL CPUs.
3. Supports certain SATA CDROM when "OnChip Serial ATA" is running in "Enhanced Mode".
4. Changed "PWM Shutdown Temperature" as "Disabled", "PWM Warning Temperature" default to 95 degree C.
5. BIOS compile date: 11/23/2004

1. CPUマイクロコードを更新.
2. BIOS更新日: 08/16/2004

1. CPU micro codeを更新しました。
2. "Onboard Network Controller" がdisabledになっている場合、 System ConfigurationのオンボードLANチップの MACアドレスを表示します。 
3. "ALT+F2" ホットキー機能用の AWDFLASH v8.32サポートを追加しました。
4. パワーサプライの互換性を拡張しました。
5. "OnChip SATA Raid Rom" アイテムがdisabledにならないという問題を修正しました。
6. CPU temperatureの部分を修正しました。
7. "PWM Shutdown Temperature" アイテムを追加しました。
8. "PWM Warning Temperature" アイテムを追加しました。
9. BIOS更新日時: 04/27/2004

1. P4 Prescott 2.4G (533MHz/ 1M L2/ 90nm) CPUのための"CPU is unworkable" エラーメッセージを修正しました。以下のステップにしたがってBIOSの更新をしてください:
   1. 起動時、"CPU is unworkable"が表示されている際に<F1>キーを押し続けてください。
   2. 起動ディスクがらシステムを起動し、BIOSを更新してください。
2. BIOS更新日時: 03/12/2004.

1. Fixed a problem where the system cannot boot into Windows if
   1. The OS is installed on the SATA hard disk when both SATA and PATA hard disks are present.
   2. The PATA hard disk is removed after the OS installation.
2. Updated Prescott CPU micro code.
3. Changed the default year to 2004.
4. Updated Intel OSB logo.
5. Enhanced compatibility with certain non-RAID cards.
6. Updated INTEL RAID BIOS to version 3.5.0.3003.
7. BIOS compile date: 02/23/2004.

1. Updated CPU micro code.
2. Added Pentium 4 Extreme Edition support.
3. Fixed the problem where the CAS latency can not be set manually when the CPU:DRAM is set to PSB8000/5:4 or PSB800/3:2.
4. Fixed the problem where the hard disk will not be recognized if the OnChip SATA is set to "Combined Mode" then choose "RAID".
5. Fixed the problem where system will reboot when the "Resume by Alarm" is enabled and user pressed power button to shutdown the system during POST.
6. Fixed HDD size detected as 136GB when 200/250/300 GB SATA drives are connected to SATA1 or SATA2 (ICH5 SATA channels).
7. BIOS compile date: 11/04/2003

1. Updated CPU micro code (0F29H/14H).
2. Added hot key wording to enter BIOS setup when full screen logo enabled.
3. Changed the option wording from "OnChip SATA" to "OnChip SATA RAID" for "Bootable Add-in Device".
4. Changed the default setting of "OnBoard IR Port" to "Disabled".
5. Fixed the booting failure problem of Maxtor SATA HDD (Model name: 6Y120M0) in ICH5R RAID 0 status. (for IS7-G and IS7 only)
6. Changed the option wordings of "Boot Device" from "ZIP100" to "ZIP100/250" and from "USB-ZIP" to "USB-ZIP/LS120".
7. Enhanced the system stability when over clocks the CPU FSB over 255 MHz with CPU:DRAM = 1:1 setting. (Over clocking is out of warranty)
8. Revised the wording of memory status from "DDR at Bank" to "DDR at DIMM" in system configuration table.
9. Fixed the problem that specific CD-ROM device could not be correctly detected when there is specific HDD connected onto the same IDE cable.
10. BIOS Compile Date: 8/15/2003.

1. Fixed the problem that no effect during POST if change "Delay IDE Initial" in BIOS setup.
2. Revised the wording of IEEE1394 controller in PCI device listing.
3. Fixed the problem that DOS4GW.EXE causes system hang-up in DOS environment.
4. Added function that automatically detects CPU operation speed after discharging CMOS data.
5. Added SATA RAID 1 function for Intel ICH5R south bridge.The IAA RAID driver should be updated to v3.5 or later to support RAID 1 in Windows XP.
   http://downloadfinder.intel.com/scripts-df/download.asp?url=/6363/eng/iaar35_enu.exe&ProductID=961
6. BIOS Compile date: 7/14/2003.

1. Fixes wrong system operation caused by incomplete discharging CMOS data by CCMOS jumper.
2. Shows the correct IRQ of IDE Controller in PCI Devices Listing.
3. Fixes CPU Thermal Throttling behavior while under minus temperature, and supports minus temperature reading in BIOS Setup.
4. Fixes the problem that system could not automatically get into S4 mode, after enabled Power Scheme of "Power Option" under Windows XP
5. Updates CPU Microcode (CPUID=0F13h, Patch ID=05h ; CPUID=0F12h, Patch ID=02eh)。
6. Fix the problem that PCU Slot Device in "-Bootabled Add-in Device" function can not boot up in top priority.
7. BIOS Compile Date: 7/02/2003
   

BIOS ID:13

New Fixes/Features
1. Added support for IS7-G, IS7, and IS7-E.
2. Updated CPU micro code (CPU: 0F29H, ID=11H).
3. Added CPU multiplier 8X for engineering sample CPU and maximum CPU frequency 412 MHz.
4. Revised setup menu for OnChip Serial ATA.
5. Fixed on-chip SATA boot issue while another bootable hard drives exist and attached to IDE-1 or IDE-2.
6. Updated memory reference code and ICH5 BIOS spec to v1.2.
7. Fixed PS/2 mouse malfunctioning problem while the USB cable of Media XP attached to mainboard.
8. Fixed DOS 6.22 booting failure from FAT16 partition.
9. Fixed BIOS hang-up problem which is caused by specific CPU cooling fan reporting error RPM to BIOS when CPU FanEQ 60% enabled.
10. Revised the following default settings in BIOS setup page. - Bootable Add-in Device: PCI Slot Device - CPU FanEQ Active Temperature: 70 C - CPU Warning Temperature: 85 C
11. Added 80, 85, and 90 degrees C into "Shutdown Temperature".
12. Enabled "IDE Block Mode" and hided the option.
13. Revised ICH5R RAID BIOS display issue.
14. Revised power-on delay time from 4~5 seconds to 1~2 seconds after AC power lost and resumed.
15. Added description for "Bootable Add-in Device".
16. Fixed the problem that NB fan still reports full speed in PC Health page when "CPU FanEQ Speed Control" is enabled.
17. Added new option "IDE Bus Master".
18. Added description for "Shutdown when CPUFAN Fail".
19. Revised the wording of IDE channels inside the BIOS Setup. IDE Channel 0, 1, 2, and 3 are changed to 1, 2, 3, and 4.
20. Added new option "SATA RAID ROM" to setup both "OnBoard SATA" and "OnChip SATA".
21. Added new option "HDD Change Message" in Advanced BIOS Features and the default setting is "Disabled". If this option is changed to "Enabled",the system will show warning message and prompt for a confirmation whenone or more than one HDD had been added into or removed from the system.
22. Fixed "CPU THRM-Throttling" function.
23. Added new options "Refresh Cycle Time", "Read Delay Adjust (tRD Adj)", and "Command Per Clock (CPC)".
24. Changed the default setting of "Drive A" from "None" to "1.44M" after Load Fail-safe Defaults.
25. Changed the default setting of "OnCip Serial ATA" to "Auto".
26. Added "Game Accelerator" technology.
27. Revised the error reading of fan speed for specific CPU cooling fan when FanEQ 60% enabled.
28. Fixed the slow detection problem when HDD simulation card installed.
29. Fixed the problem that SMARTDRV.EXE malfunction in DOS 6.22 environment.
30. Fixed the problem that Windows 98 bootable floppy disk causes system hang up during loading CD-ROM driver when "OnChip Serial ATA" is set to"Auto" or "Enhanced Mode".
31. Removed the option "Force Update ESCD".
32. BIOS Compile Date: 6/10/2003.

BIOS ID:10

1. First release
2. BIOS Compile Date: 4/11/2003.