1. Support Intel PIII / Celeron CPUs up to1.1G(100). (Please mention: This board does not support Tualatin core PIII / Celeron processors.)
   
2. HPT 366 BIOS version: 1.25.
   

BIOS ID: XU

1. Support Celeron 800MHz(100) CPU.
   
2. Support Flash Menu.

BIOS ID: UH

1. Supports to PIII 1GHz CPU(133MHz FSB).

BIOS ID: SH

1. Supports Celeron 566(66),600(66),667(66),700(66)and PIII850(100),866(133) and 933(133) MHz CPUs.

BIOS ID: RV

1. Improves the 133 Mhz option in SoftMenu.
   
2. Fixes the hard disk detection failure issue when putting the CD ROM drive on IDE 1, and sets the boot sequence as CDROM first.
   
3. Fixes the incorrect memory capacity issue under Linux.
   
4. Fixes the HighPoint display problem with AHA-2940A and TNT AGP cards.
   
5. Fixes the Wake on Ring, Wake on Lan, and Wake on Alarm problems under Win98SE .
   
6. Improve the CPU Warning Temperture funtion to solve Win98SE shout down problem that OEM CPU temperture was detected too high.

BIOS ID: QJ

1. For users who try to overclock the FSB up to 133 Mhz, but fail when using some AGP video cards which can't run at that frequency in 2X mode.
   
2. Supports PIII CPUs up to 800MHz.
   
3. Increases SDRAM compatibility.

1. Supports I2C debug card.
   
2. Adds an AGP transfer mode for choosing AGP transfer mode.

1. Supports PIII 600Mhz(100Mhz FSB), 650Mhz(100Mhz FSB) and 700Mhz(100Mhz FSB) CPUs.
   
2. Updates HPT 366's BIOS to rev. 1.21.
   
3. Shows the correct frequency as set by User Define.

1. Solves the boot failure issue when switching the CPU to another one.
   
2. Solves the auto detection function while putting a CDROM on IDE 1 master.
   

1. First release.