1. Enhanced compatibility with certain memories.
2. BIOS compiled date: 06/08/2006

1. The POST screen now show correctly when ATI X1300 VGA card installed.
2. BIOS compiled date: 1/17/2006

1. Recalibrate CPU temperature.
2. Enhance the IDE RAID card compatibility.
3. BIOS compiled date: 08/11/2005

1. The EIST function now works on an Intel 630 processor.
2. Audio now works as intended after resuming from S3 mode.
3. Add new CPU micro code.
4. BIOS compiled date: 04/18/2005

1. Fixed the issue that system may hang when pressing ALT-F2 at full screen logo screen.
2. Fixed minor wording issue when CPU with 2M L2 cache is installed.
3. Change the adjustable FSB range to 500MHz.
4. Added new item "Execute Disable Bit" and set the default to "Disable".
5. Added EIST control item.
6. Add "C1E Function" control item.
7. Fixed the issue that system may hang when SATA port 4 in used.
8. BIOS compiled date: 03/23/2005

1. Add EIST support.
2. Enhance four 1GB memory support.
3. FlashMenu now works when using EM64T CPU.
4. Enhance DRAM compatibility.
5. BIOS compiled date: 02/01/2005

1. Added EM64T wording on screen.
2. Added "CPU Operating Speed" item adjustable with FSB 1066 CPUs.
3. Enhanced PCI-E VGA performance.
4. Fixed system hang when CMOS is cleared by Award Flash tool & SATA set as RAID.
5. Corrected CPU brand name with certain FSB 1066 CPUs.
6. Corrected "DRAM Frequency" wording in OC Guru.
7. Supports FSB 1066 CPU overclocking function in µGuru Preset Mode.
8. Enhanced stability with P4EE CPUs.
9. Calibrated certain CPU voltages in Preset Mode.
10. Calibrated Hi Limit value of NB Voltage in ABIT EQ.
11. Changed default RTC year to 2005.
12. BIOS compile date: 01/03/2005

1. Add support AA8XE.
2. Fixed an issue where after clear CMOS & into BIOS setting but not Load Optimized Default CPU clock show 0000MHz.
3. Add wording "Interleaved Mode" or "Asymmetric Mode" after Dual Channel.
4. Adjust CPU FAN Speed Low Limit to 300RPM.
5. Add adjustable MAX & MIN multiplier item for certain retail INTEL CPU.
6. Update CPU micro code.
7. Fixed an auto wake up issue if system resume from standby mode before.
8. Preserve USER Preset Mode in OC Guru, if CPU change.
9. BIOS compile date: 10/01/2004

1. Updated CPU micro code.
2. If system memory is not installed, an alarm will sound.
3. Added "CPU feature" item in "Advanced BIOS Features".
4. If FSB=533Mhz, DDR ratio=2:3.
5. Fixed a POST failure issue if the TAB key is pressed continuously.
6. Enabled "SATA MODE" item if "Onchip Serial ATA model" is set to "AUTO".
7. Fixed an issue where "PCI-E Compliancy Mode" in "v1.0" results in a COMS CHECK COMS error.
8. BIOS compile date: 08/20/2004

1. Enhanced CPU stability over 250MHz.
2. Added "DDR600" item.
3. Added "Game Accelerator" item.
4. Enhanced SATA HDD stability.
5. Added "Interleaved Mode" or "Asymmetric Mode" wording for Dual Channel mode, "Single Channel" for Single mode.
6. BIOS compile date: 07/22/2004

1. Supports P4 Extreme Edition CPUs
2. Added DRAM Frequency & HOST/DRAM Clock items to post screen
3. Added PWM Temperature 1 & 2 shutdown temperature maximums to 130 degree C.
4. Revised DMI information.
5. Updated CPU micro code.
6. BIOS compile date: 06/25/2004

1. First Release.
2. BIOS compile date: 05/26/2004

1. Enhanced compatibility with certain memories.
2. BIOS compiled date: 06/08/2006

1. The POST screen now show correctly when ATI X1300 VGA card installed.
2. BIOS compiled date: 1/17/2006

1. Recalibrate CPU temperature.
2. Enhance the IDE RAID card compatibility.
3. BIOS compiled date: 08/11/2005

1. The EIST function now works on an Intel 630 processor.
2. Audio now works as intended after resuming from S3 mode.
3. Add new CPU micro code.
4. BIOS compiled date: 04/18/2005

1. Fixed the issue that system may hang when pressing ALT-F2 at full screen logo screen.
2. Fixed minor wording issue when CPU with 2M L2 cache is installed.
3. Change the adjustable FSB range to 500MHz.
4. Added new item "Execute Disable Bit" and set the default to "Disable".
5. Added EIST control item.
6. Add "C1E Function" control item.
7. Fixed the issue that system may hang when SATA port 4 in used.
8. BIOS compiled date: 03/23/2005

1. Add EIST support.
2. Enhance four 1GB memory support.
3. FlashMenu now works when using EM64T CPU.
4. Enhance DRAM compatibility.
5. BIOS compiled date: 02/01/2005

1. Added EM64T wording on screen.
2. Added "CPU Operating Speed" item adjustable with FSB 1066 CPUs.
3. Enhanced PCI-E VGA performance.
4. Fixed system hang when CMOS is cleared by Award Flash tool & SATA set as RAID.
5. Corrected CPU brand name with certain FSB 1066 CPUs.
6. Corrected "DRAM Frequency" wording in OC Guru.
7. Supports FSB 1066 CPU overclocking function in µGuru Preset Mode.
8. Enhanced stability with P4EE CPUs.
9. Calibrated certain CPU voltages in Preset Mode.
10. Calibrated Hi Limit value of NB Voltage in ABIT EQ.
11. Changed default RTC year to 2005.
12. BIOS compile date: 01/03/2005

1. Add support AA8XE.
2. Fixed an issue where after clear CMOS & into BIOS setting but not Load Optimized Default CPU clock show 0000MHz.
3. Add wording "Interleaved Mode" or "Asymmetric Mode" after Dual Channel.
4. Adjust CPU FAN Speed Low Limit to 300RPM.
5. Add adjustable MAX & MIN multiplier item for certain retail INTEL CPU.
6. Update CPU micro code.
7. Fixed an auto wake up issue if system resume from standby mode before.
8. Preserve USER Preset Mode in OC Guru, if CPU change.
9. BIOS compile date: 10/01/2004

1. Updated CPU micro code.
2. If system memory is not installed, an alarm will sound.
3. Added "CPU feature" item in "Advanced BIOS Features".
4. If FSB=533Mhz, DDR ratio=2:3.
5. Fixed a POST failure issue if the TAB key is pressed continuously.
6. Enabled "SATA MODE" item if "Onchip Serial ATA model" is set to "AUTO".
7. Fixed an issue where "PCI-E Compliancy Mode" in "v1.0" results in a COMS CHECK COMS error.
8. BIOS compile date: 08/20/2004

1. Enhanced CPU stability over 250MHz.
2. Added "DDR600" item.
3. Added "Game Accelerator" item.
4. Enhanced SATA HDD stability.
5. Added "Interleaved Mode" or "Asymmetric Mode" wording for Dual Channel mode, "Single Channel" for Single mode.
6. BIOS compile date: 07/22/2004

1. Supports P4 Extreme Edition CPUs
2. Added DRAM Frequency & HOST/DRAM Clock items to post screen
3. Added PWM Temperature 1 & 2 shutdown temperature maximums to 130 degree C.
4. Revised DMI information.
5. Updated CPU micro code.
6. BIOS compile date: 06/25/2004

1. First Release.
2. BIOS compile date: 05/26/2004

1. Enhanced compatibility with certain memories.
2. BIOS compiled date: 06/08/2006

1. The POST screen now show correctly when ATI X1300 VGA card installed.
2. BIOS compiled date: 1/17/2006

1. Recalibrate CPU temperature.
2. Enhance the IDE RAID card compatibility.
3. BIOS compiled date: 08/11/2005

1. The EIST function now works on an Intel 630 processor.
2. Audio now works as intended after resuming from S3 mode.
3. Add new CPU micro code.
4. BIOS compiled date: 04/18/2005

1. Fixed the issue that system may hang when pressing ALT-F2 at full screen logo screen.
2. Fixed minor wording issue when CPU with 2M L2 cache is installed.
3. Change the adjustable FSB range to 500MHz.
4. Added new item "Execute Disable Bit" and set the default to "Disable".
5. Added EIST control item.
6. Add "C1E Function" control item.
7. Fixed the issue that system may hang when SATA port 4 in used.
8. BIOS compiled date: 03/23/2005

1. Add EIST support.
2. Enhance four 1GB memory support.
3. FlashMenu now works when using EM64T CPU.
4. Enhance DRAM compatibility.
5. BIOS compiled date: 02/01/2005

1. Added EM64T wording on screen.
2. Added "CPU Operating Speed" item adjustable with FSB 1066 CPUs.
3. Enhanced PCI-E VGA performance.
4. Fixed system hang when CMOS is cleared by Award Flash tool & SATA set as RAID.
5. Corrected CPU brand name with certain FSB 1066 CPUs.
6. Corrected "DRAM Frequency" wording in OC Guru.
7. Supports FSB 1066 CPU overclocking function in µGuru Preset Mode.
8. Enhanced stability with P4EE CPUs.
9. Calibrated certain CPU voltages in Preset Mode.
10. Calibrated Hi Limit value of NB Voltage in ABIT EQ.
11. Changed default RTC year to 2005.
12. BIOS compile date: 01/03/2005

1. Add support AA8XE.
2. Fixed an issue where after clear CMOS & into BIOS setting but not Load Optimized Default CPU clock show 0000MHz.
3. Add wording "Interleaved Mode" or "Asymmetric Mode" after Dual Channel.
4. Adjust CPU FAN Speed Low Limit to 300RPM.
5. Add adjustable MAX & MIN multiplier item for certain retail INTEL CPU.
6. Update CPU micro code.
7. Fixed an auto wake up issue if system resume from standby mode before.
8. Preserve USER Preset Mode in OC Guru, if CPU change.
9. BIOS compile date: 10/01/2004

1. Enhanced compatibility with certain memories.
2. BIOS compiled date: 06/08/2006

1. The POST screen now show correctly when ATI X1300 VGA card installed.
2. BIOS compiled date: 1/17/2006

1. Recalibrate CPU temperature.
2. Enhance the IDE RAID card compatibility.
3. BIOS compiled date: 08/11/2005

1. The EIST function now works on an Intel 630 processor.
2. Audio now works as intended after resuming from S3 mode.
3. Add new CPU micro code.
4. BIOS compiled date: 04/18/2005

1. Fixed the issue that system may hang when pressing ALT-F2 at full screen logo screen.
2. Fixed minor wording issue when CPU with 2M L2 cache is installed.
3. Change the adjustable FSB range to 500MHz.
4. Added new item "Execute Disable Bit" and set the default to "Disable".
5. Added EIST control item.
6. Add "C1E Function" control item.
7. Fixed the issue that system may hang when SATA port 4 in used.
8. BIOS compiled date: 03/23/2005

1. Add EIST support.
2. Enhance four 1GB memory support.
3. FlashMenu now works when using EM64T CPU.
4. Enhance DRAM compatibility.
5. BIOS compiled date: 02/01/2005

1. Added EM64T wording on screen.
2. Added "CPU Operating Speed" item adjustable with FSB 1066 CPUs.
3. Enhanced PCI-E VGA performance.
4. Fixed system hang when CMOS is cleared by Award Flash tool & SATA set as RAID.
5. Corrected CPU brand name with certain FSB 1066 CPUs.
6. Corrected "DRAM Frequency" wording in OC Guru.
7. Supports FSB 1066 CPU overclocking function in µGuru Preset Mode.
8. Enhanced stability with P4EE CPUs.
9. Calibrated certain CPU voltages in Preset Mode.
10. Calibrated Hi Limit value of NB Voltage in ABIT EQ.
11. Changed default RTC year to 2005.
12. BIOS compile date: 01/03/2005

1. Add support AA8XE.
2. Fixed an issue where after clear CMOS & into BIOS setting but not Load Optimized Default CPU clock show 0000MHz.
3. Add wording "Interleaved Mode" or "Asymmetric Mode" after Dual Channel.
4. Adjust CPU FAN Speed Low Limit to 300RPM.
5. Add adjustable MAX & MIN multiplier item for certain retail INTEL CPU.
6. Update CPU micro code.
7. Fixed an auto wake up issue if system resume from standby mode before.
8. Preserve USER Preset Mode in OC Guru, if CPU change.
9. BIOS compile date: 10/01/2004

1. Support multiplier adjusting function for Core 2 Duo CPU.
2. Update AHCI BIOS ROM.
3. Enhanced compatibility with certain memories.
4. Add the item "Thermal control".
5. Support DRAM tRFC adjusting function.
6. Support Conroe L CPU.
7. Audio now works as intended after resuming from S3.
8. The function "wake on LAN" now works as intemded.
9. BIOS compiled date: 10/19/2006

1. Support the IDE/ RAID mode adjusting function on JMicron363
2. Enhanced memory compatibility with certain memories.
3. BIOS compiled date: 09/08/2006

1. Fixed the issue that the CAS Latency may not be able to set on 5 and 6
2. BIOS compiled date: 08/09/2006

1. Enhanced compatibility with certain memories.
2. Fixed the issue that the system sometimes hangs on POST. code 2A when install the Core 2 Duo processors.
3. BIOS compiled date: 07/20/2006

1. First release.
2. BIOS compiled date: 06/28/2006

1. Support multiplier adjusting function for Core 2 Duo CPU.
2. Update AHCI BIOS ROM.
3. Enhanced compatibility with certain memories.
4. Add the item "Thermal control".
5. Support DRAM tRFC adjusting function.
6. Support Conroe L CPU.
7. Audio now works as intended after resuming from S3.
8. The function "wake on LAN" now works as intemded.
9. BIOS compiled date: 10/19/2006

1. Support the IDE/ RAID mode adjusting function on JMicron363
2. Enhanced memory compatibility with certain memories.
3. BIOS compiled date: 09/08/2006

1. Fixed the issue that the CAS Latency may not be able to set on 5 and 6
2. BIOS compiled date: 08/09/2006

1. Enhanced compatibility with certain memories.
2. Fixed the issue that the system sometimes hangs on POST. code 2A when install the Core 2 Duo processors.
3. BIOS compiled date: 07/20/2006

1. First release.
2. BIOS compiled date: 06/28/2006

1. Enhanced compatibility with certain storage cards.
2. BIOS compiled date: 03/17/2006

1. The POST screen now show correctly when ATI X1300 VGA card installed.
2. Update CPU micro code.
3. BIOS compiled date: 1/10/2006
   

1. Recalibrate CPU temperature.
2. BIOS compiled date: 08/04/2005

1. Fixed the issue that the EIST function does not work with Intel 630 processor
2. BIOS compiled date: 04/14/2005

1. Fixed the issue that system may hang when pressing ALT-F2 at full screen logo screen.
2. Fixed minor wording issue when CPU with 2M L2 cache is installed.
3. Change the adjustable FSB range to 500MHz.
4. Change the default setting of "Execute Disable Bit" to "Disable".
5. Added EIST control item.
6. Add "C1E Function" control item.7
7. Fixed the issue that system may hang when SATA port 4 in used.
8. BIOS compiled date: 03/23/2005

1. Enhance four 1GB memory support.
2. FlashMenu now works when using EM64T CPU.
3. BIOS compiled date: 02/02/2005

1. Added RocketBoy AG8 supported.
2. Added EIST support.
3. BIOS compile date: 01/18/2005

1. Updated CPU micro code.
2. Enhanced compatibility with P4EE CPUs.
3. Added EM64T wording on screen.
4. Enhanced PCI-E VGA performance.
5. Fixed system hang from clear CMOS by Award Flash tool & SATA as RAID function.
6. Fixed DRAM ratio wording with FSB 533 CPU.
7. Changed default RTC year to 2005.
8. BIOS compile date: 01/03/2005

1. Updated CPU micro code.
2. Fixed an issue where where the CPU clock would display 0000MHz after clearing the CMOS and BIOS setting but not selecting "Load Optimized Defaults".
3. Shows DRAM type when full screen logo is disabled.
4. Adjusted CPU fan speed lower limit to 300RPM.
5. Removed DDR600 item.
6. Added adjustable MAX and MIN multiplier item for certain retail INTEL CPUs.
7. Fixed an auto wake up issue which affected systems resuming from standby mode.
8. BIOS compile date: 09/22/2004

1. Changed default stand-by mode from S1 to S3 to meet WHQL requirement. This function should be accompanied by changing USB-PWR Jumper setting from default 1-2 (disabled wake-up) to 2-3 (enabled wake-up). Please refer to user's manual and check correct jumper position.
2. BIOS compile date: 09/09/2004

1. Updated CPU micro code.
2. If system memory is not installed, an alarm will sound.
3. Added "CPU feature" item in "Advanced BIOS Features".
4. If FSB=533Mhz, DDR ratio=2:3.
5. Fixed a POST fail issue if the TAB key is pressed continuously.
6. Enabled "SATA MODE" item if "Onchip Serial ATA model" is set to "AUTO".
7. Fixed an issue where the "Restore on AC Power Loss" function would fail.
8. BIOS compile date: 08/20/2004

1. Shows CPU Clock value from AC2003.
2. Added "Interleaved Mode" or "Asymmetric Mode" wording after Dual Channel.
3. Corrected "Restore on AC Power Loss" item.
4. Added notification when no 80-wire cable is installed.
5. BIOS compile date: 07/07/2004

1. Supports AG8-V.
2. Supports P4 Extreme Edition CPUs.
3. Added DRAM Frequency & HOST/DRAM Clock items to post screen.
4. Added PWM Temperature 1 & 2 shutdown temperature maximums to 130 degree C.
5. Revised DMI information.
6. Updated CPU micro code.
7. BIOS compile date: 06/25/2004

1. First Release.
2. BIOS compile date: 05/28/2004

1. Enhanced compatibility with certain storage cards.
2. BIOS compiled date: 03/17/2006

1. The POST screen now show correctly when ATI X1300 VGA card installed.
2. Update CPU micro code.
3. BIOS compiled date: 1/10/2006
   

1. Recalibrate CPU temperature.
2. BIOS compiled date: 08/04/2005

1. Fixed the issue that the EIST function does not work with Intel 630 processor
2. BIOS compiled date: 04/14/2005

1. Fixed the issue that system may hang when pressing ALT-F2 at full screen logo screen.
2. Fixed minor wording issue when CPU with 2M L2 cache is installed.
3. Change the adjustable FSB range to 500MHz.
4. Change the default setting of "Execute Disable Bit" to "Disable".
5. Added EIST control item.
6. Add "C1E Function" control item.7
7. Fixed the issue that system may hang when SATA port 4 in used.
8. BIOS compiled date: 03/23/2005

1. Enhance four 1GB memory support.
2. FlashMenu now works when using EM64T CPU.
3. BIOS compiled date: 02/02/2005

1. Added RocketBoy AG8 supported.
2. Added EIST support.
3. BIOS compile date: 01/18/2005

1. Updated CPU micro code.
2. Enhanced compatibility with P4EE CPUs.
3. Added EM64T wording on screen.
4. Enhanced PCI-E VGA performance.
5. Fixed system hang from clear CMOS by Award Flash tool & SATA as RAID function.
6. Fixed DRAM ratio wording with FSB 533 CPU.
7. Changed default RTC year to 2005.
8. BIOS compile date: 01/03/2005

1. Updated CPU micro code.
2. Fixed an issue where where the CPU clock would display 0000MHz after clearing the CMOS and BIOS setting but not selecting "Load Optimized Defaults".
3. Shows DRAM type when full screen logo is disabled.
4. Adjusted CPU fan speed lower limit to 300RPM.
5. Removed DDR600 item.
6. Added adjustable MAX and MIN multiplier item for certain retail INTEL CPUs.
7. Fixed an auto wake up issue which affected systems resuming from standby mode.
8. BIOS compile date: 09/22/2004

1. Changed default stand-by mode from S1 to S3 to meet WHQL requirement. This function should be accompanied by changing USB-PWR Jumper setting from default 1-2 (disabled wake-up) to 2-3 (enabled wake-up). Please refer to user's manual and check correct jumper position.
2. BIOS compile date: 09/09/2004

1. Updated CPU micro code.
2. If system memory is not installed, an alarm will sound.
3. Added "CPU feature" item in "Advanced BIOS Features".
4. If FSB=533Mhz, DDR ratio=2:3.
5. Fixed a POST fail issue if the TAB key is pressed continuously.
6. Enabled "SATA MODE" item if "Onchip Serial ATA model" is set to "AUTO".
7. Fixed an issue where the "Restore on AC Power Loss" function would fail.
8. BIOS compile date: 08/20/2004

1. Shows CPU Clock value from AC2003.
2. Added "Interleaved Mode" or "Asymmetric Mode" wording after Dual Channel.
3. Corrected "Restore on AC Power Loss" item.
4. Added notification when no 80-wire cable is installed.
5. BIOS compile date: 07/07/2004

1. Supports AG8-V.
2. Supports P4 Extreme Edition CPUs.
3. Added DRAM Frequency & HOST/DRAM Clock items to post screen.
4. Added PWM Temperature 1 & 2 shutdown temperature maximums to 130 degree C.
5. Revised DMI information.
6. Updated CPU micro code.
7. BIOS compile date: 06/25/2004

1. First Release.
2. BIOS compile date: 05/28/2004

1. Enhanced compatibility with certain storage cards.
2. BIOS compiled date: 03/17/2006

1. The POST screen now show correctly when ATI X1300 VGA card installed.
2. Update CPU micro code.
3. BIOS compiled date: 1/10/2006
   

1. Recalibrate CPU temperature.
2. BIOS compiled date: 08/04/2005

1. Fixed the issue that the EIST function does not work with Intel 630 processor
2. BIOS compiled date: 04/14/2005

1. Fixed the issue that system may hang when pressing ALT-F2 at full screen logo screen.
2. Fixed minor wording issue when CPU with 2M L2 cache is installed.
3. Change the adjustable FSB range to 500MHz.
4. Change the default setting of "Execute Disable Bit" to "Disable".
5. Added EIST control item.
6. Add "C1E Function" control item.7
7. Fixed the issue that system may hang when SATA port 4 in used.
8. BIOS compiled date: 03/23/2005

1. Enhance four 1GB memory support.
2. FlashMenu now works when using EM64T CPU.
3. BIOS compiled date: 02/02/2005

1. Added RocketBoy AG8 supported.
2. Added EIST support.
3. BIOS compile date: 01/18/2005

1. Updated CPU micro code.
2. Enhanced compatibility with P4EE CPUs.
3. Added EM64T wording on screen.
4. Enhanced PCI-E VGA performance.
5. Fixed system hang from clear CMOS by Award Flash tool & SATA as RAID function.
6. Fixed DRAM ratio wording with FSB 533 CPU.
7. Changed default RTC year to 2005.
8. BIOS compile date: 01/03/2005

1. Updated CPU micro code.
2. Fixed an issue where where the CPU clock would display 0000MHz after clearing the CMOS and BIOS setting but not selecting "Load Optimized Defaults".
3. Shows DRAM type when full screen logo is disabled.
4. Adjusted CPU fan speed lower limit to 300RPM.
5. Removed DDR600 item.
6. Added adjustable MAX and MIN multiplier item for certain retail INTEL CPUs.
7. Fixed an auto wake up issue which affected systems resuming from standby mode.
8. BIOS compile date: 09/22/2004

1. Changed default stand-by mode from S1 to S3 to meet WHQL requirement. This function should be accompanied by changing USB-PWR Jumper setting from default 1-2 (disabled wake-up) to 2-3 (enabled wake-up). Please refer to user's manual and check correct jumper position.
2. BIOS compile date: 09/09/2004

1. Updated CPU micro code.
2. If system memory is not installed, an alarm will sound.
3. Added "CPU feature" item in "Advanced BIOS Features".
4. If FSB=533Mhz, DDR ratio=2:3.
5. Fixed a POST fail issue if the TAB key is pressed continuously.
6. Enabled "SATA MODE" item if "Onchip Serial ATA model" is set to "AUTO".
7. Fixed an issue where the "Restore on AC Power Loss" function would fail.
8. BIOS compile date: 08/20/2004

1. Shows CPU Clock value from AC2003.
2. Added "Interleaved Mode" or "Asymmetric Mode" wording after Dual Channel.
3. Corrected "Restore on AC Power Loss" item.
4. Added notification when no 80-wire cable is installed.
5. BIOS compile date: 07/07/2004

1. Supports AG8-V.
2. Supports P4 Extreme Edition CPUs.
3. Added DRAM Frequency & HOST/DRAM Clock items to post screen.
4. Added PWM Temperature 1 & 2 shutdown temperature maximums to 130 degree C.
5. Revised DMI information.
6. Updated CPU micro code.
7. BIOS compile date: 06/25/2004

1. First Release.
2. BIOS compile date: 05/28/2004

1. Added adjustable MAX & MIN multiplier item for certain retail INTEL CPUs.
2. Updated CPU micro code.
3. Supports certain SATA CDROMs when "OnChip Serial ATA" is running in "Enhanced Mode".
4. Changed "CPU Alarm temperature" default to 85°C.
5. BIOS compile date: 11/03/2004

1. Updated CPU micro code.
2. BIOS compile date: 08/17/2004

1. Updated CPU Micro Code.
2. Shows MAC Address of onboard LAN chip in System Configuration section if "Onboard Network Controller" is disabled.
3. Added AWDFLASH v8.32 support for the "ALT+F2" hot key function.
4. Enhanced compatibility with certain power supplies.
5. Fixed an issue where the "OnChip SATA Raid Rom" item could not be disabled.
6. BIOS compile date: 04/09/2004

1. Please use the AWDFLASH v8.24F flash utility to update the AI7 BIOS.
2. Fixed a problem where the system cannot boot into Windows if
   1. The OS is installed on the SATA hard disk when both SATA and PATA hard disks are present.
   2. The PATA hard disk is removed after the OS installation.
3. Added "CPU FAN Failed Warning" item.
4. Updated Prescott CPU micro code.
5. Updated Intel OSB logo.
6. Changed the default year to 2004.
7. Added "Full Screen LOGO Show" and replaced "Intel OnScreen Branding" item.
8. Updated INTEL RAID BIOS to version 3.5.0.3003.
9. BIOS compile date: 02/25/2004.

1. Veuillez utiliser l'utilitaire de flash AWDFLASH v8.24F pour mettre à jour le BIOS AI7.
2. Ajout du support pour Pentium 4 Extreme Edition.
3. Désactivation de l'unité de détection Winbond W83627HF pour empêcher d'afficher des informations incorrectes sur la tension du CPU dans certains logiciels tiers.
4. Résolution du problème où le BIOS va afficher deux fois la phrase "AGP/PCI Frequency is 66/33MHz (La fréquence AGP/PCI est de 66/33MHz)" après démarrage à chaud.
5. Résolution du problème où certains CD/DVD-ROM ne sont pas correctement détectés si le lecteur HDD est sur le même câble IDE.
6. Résolution du problème où le système va redémarrer lorsque l'option "Resume by Alarm (Réveil par Alarme)" est activée et que l'utilisateur appuie sur l'interrupteur d'alimentation pour arrêter le système durant le POST.
7. Résolution du problème où les périphériques IDE ne peuvent pas être détectés correctement si TAB et DEL sont appuyées en même temps en entrant dans la configuration du BIOS.
8. Résolution du problème où la taille du HDD est détectée comme étant 136GB alors que des lecteurs SATA 200/250/300 GB sont connectes au SATA1 ou SATA2 (Canaux SATA ICH5).
9. Amélioration des performances du système.
10. Date de compilation du BIOS: 11/10/2003.

1. Please use flash utility AWDFLASH v8.24F to update AI7 BIOS.
2. Fixed the problem "CPU Fan Fail Shutdown" fails to function.
3. Fixed the problem "Restore On AC Power Loss" fails to function.
4. Revise the "NB FanEQ Control" temperature range to 25~50℃.
5. BIOS compile date: 10/15/2003.

1. Please use flash utility AWDFLASH v8.24F to update AI7 BIOS.
2. Fixed the system hangs at post code 52h when using Media XP and Iomega USB ZIP 250.
3. Fixed some string will not be shown on the POST screen when pressed TAB key to enter POST screen.
4. Synchronize the external clock and voltage with OC Guru.
5. Synchronize the options related to temperature monitoring and FanEQ with μGuru .
6. Add CPU throttling function.
7. BIOS compile date: 10/07/2003.

1. Please use flash utility AWDFLASH v8.24F to update AI7 BIOS.
2. First release.
3. BIOS compile date: 09/23/2003

1. Enhanced compatibility with Pentium 4 EE processors.
2. BIOS compiled date: 07/07/2006

1. The POST screen now show correctly when ATI X1300 VGA card installed.
2. BIOS compiled date: 12/14/2005

1. Support Presler CPU.
2. ABIT EQ now works as intended after resuming from S3 mode.
3. BIOS compiled date: 11/30/2005

1. Memory frequency will be shown correctly when N/B Strap CPU as is set to "By CPU"
2. Fixed the issue that the system may not be able to boot up from SiliconImage RAID controller when Intel RAID BIOS is enabled.
3. The function "S/PDIF in" will be work correctly now.
4. Update CPU micro code.
5. BIOS compiled date: 08/23/2005

1. Fixed the issue that BIOS will only show one processor when a dual core CPU is installed.
2. tRAS will be shown correctly now.
3. EIST now works as intended.
4. BIOS compiled date: 07/19/2005

1. Fixed the issue that with certain VGA card does not work with four 1GB RAM modules.
2. Intel OSB now shows correctly according to the CPU used.
3. PS2 mouse now works with USB keyboard.
4. Pentium D 840 will be detected correctly.
5. BIOS compiled date: 07/06/2005

1. PCI-Express clock now shows correctly in OC Guru.
2. Synchronize BIOS OC preset table with OC Guru.
3. BIOS compiled date: 05/24/2005

1. First release.
2. BIOS compiled date: 05/12/2005

1. Enhanced compatibility with Pentium 4 EE processors.
2. BIOS compiled date: 07/07/2006

1. The POST screen now show correctly when ATI X1300 VGA card installed.
2. BIOS compiled date: 12/14/2005

1. Support Presler CPU.
2. ABIT EQ now works as intended after resuming from S3 mode.
3. BIOS compiled date: 11/30/2005

1. Memory frequency will be shown correctly when N/B Strap CPU as is set to "By CPU"
2. Fixed the issue that the system may not be able to boot up from SiliconImage RAID controller when Intel RAID BIOS is enabled.
3. The function "S/PDIF in" will be work correctly now.
4. Update CPU micro code.
5. BIOS compiled date: 08/23/2005

1. Fixed the issue that BIOS will only show one processor when a dual core CPU is installed.
2. tRAS will be shown correctly now.
3. EIST now works as intended.
4. BIOS compiled date: 07/19/2005

1. Fixed the issue that with certain VGA card does not work with four 1GB RAM modules.
2. Intel OSB now shows correctly according to the CPU used.
3. PS2 mouse now works with USB keyboard.
4. Pentium D 840 will be detected correctly.
5. BIOS compiled date: 07/06/2005

1. First Release.
2. BIOS compiled date: 05/24/2005

1. Add AMD XP OEM processor 2800+ support.
2. Enhance CPU compatibility with Sempron 2200+.
3. BIOS compiled date: 06/13/2005

1. Added new CPU support.
2. Enhanced memory compatibility.
3. Calibrated CPU frequency.
4. BIOS compile date: 11/23/2004

1. AMD Sempron CPU support.
2. BIOS compile date: 08/06/2004

1. Added "Wake Up By OnChip LAN" item.
2. Fixed a problem where the system cannot boot into Windows if
   1. The OS is installed in the SATA hard disk when both the SATA and PATA hard disks are present.
   2. The PATA hard disk is removed after the OS installation.
3. Corrected "Restore on AC Power Loss" item.
4. Fixed OS shutdown function failure if "USB Mouse Support via BIOS" is enabled.
5. BIOS compile date: 07/30/2004

1. Please use the AWDFLASH v8.24F flash utility to update the AN7 BIOS.
2. Added Auto-Shutdown function when CCMOS jumper is set to pins 2-3. The correct CCMOS jumper should be on pins 1-2; in case it is placed on 2-3, the CPU core voltage will be abnormally high, an the system will shut down automatically to protect the CPU from damage.
3. Fixed an issue where USB-ZIP will be detected as a harddisk.
4. Updated SI3112 SATA BIOS to v4.2.47.
5. Revised the characters in "Wakeup by Alarm".
6. Enhanced USB 2.0 device compatibility, "Integrated Peripherals / OnChip PCI Device / USB 2.0 Device Compatible / Disabled -> Enabled".
7. Fixed an issue where SCSI boot ID cannot be selected when certain SCSI cards are installed.
8. Fixed an issue where SATA HDD boot up will fail if a PS/2 mouse is not installed.
9. Fixed an issue where the system will show 119 degrees under certain circumstances.
10. BIOS compile date: 03/04/2004.

1. Veuillez utiliser l'utilitaire de flash AWDFLASH v8.24F pour mettre à jour le BIOS  AN7.
2. Modification de la valeur de l'année RTC par défaut pour 2004.
3. Mise à jour de la ROM du contrôleur Silicon Image 3112 pour la version 4.2.43.
4. Ajout de l'option d'avertissement lors d'un problème du ventilateur du CPU.
5. Ajout de l'option de la fréquence AGP à la volée.
6. Sauvegarde du ratio du CPU par défaut dans µGuru.
7. Ajout de l'option de contrôle de la ROM SATA.
8. Résolution du problème où la fonction de démarrage à partir de la souris ne fonctionne pas avec certaines souris.
9. Amélioration de la compatibilité avec le disque dur WD400AB.
10. Synchronisation des paramètres de température de FanEQ avec OC Guru.
11. Réduction du temps qu'il faut pour sortir de l'état STR en utilisant Windows 98 et Windows ME.
12. Ajout de l'option "Afficher le logo en plein écran" (Full screen logo show).
13. Date de compilation du BIOS: 01/06/2004

1. Veuillez utiliser l'utilitaire de flash AWDFLASH v8.24F pour mettre à jour le BIOS AN7
2. Résolution du problème qui fait que l'image de l'écran est déformée après avoir appuyé sur "F8" pour de l'OC à la volée, et ensuite appuyer sur ESC.
3. Résolution du non fonctionnement du réveil par sonnerie
4. Résolution du problème où le disque dur SATA ne répond plus après être revenu du mode S3
5. Mise à jour des informations DMI DRAM et révision des mots utilisés pour le statut de la mémoire, de "DDR at bank" à "DDR at DIMM" dans le tableau de configuration du système
6. Résolution du problème où le débit de la DRAM n'est pas modifié après avoir sauvé et quitté le BIOS.
7. Amélioration de la stabilité des périphériques SATA.
8. Ajout de reprendre à partir du mode S3/S4 pour les périphériques USB.
9. Résolution du problème où le système ne peut pas démarrer Windows si
   1. l'OS est installé dans un disque dur SATA alors qu'il y des disques SATA et PATA présents ensembles.
   2. Le disque dur PATA est enlevé après l'installation de l'OS.
10. Date de compilation du BIOS: 11/13/2003
    

1. Veuillez utiliser l'utilitaire de flash AWDFLASH v8.24F pour mettre à jour le BIOS AN7.
2. Première sortie.
3. Date de compilation du BIOS: 11/11/2003

1. Support FX-60
2. Enhanced compatibility with certain USB devices
3. Enhanced compatibility with certain memories.
4. BIOS compiled date: 1/19/2006
   

1. Enhanced compatibility with certain PCI SCSI cards.
2. Add new CPU support.
3. BIOS compiled date: 11/17/2005

1. Enhanced some VGA cards compatibility.
2. Update nVIDIA RAID BIOS to V4.8
3. Enhanced DRAM compatibility.
4. Enhanced some sound cards compatibility.
5. BIOS compiled date: 09/27/2005

1. Recalibrate CPU temperature.2
2. BIOS compiled date: 07/21/2005

1. Change default setting of Cool n' Quiet to "Enable"
2. Change Full screen logo.
3. Cool n' Quiet now works as intended.
4. Fixed the issue that certain VGA card does not work with DVI output.
5. Fixed the issue that some 3D application may not run stable in SLi mode.
6. Change some item in DRAM voltage section.
7. Update AMD MCT2
8. BIOS compiled date: 07/12/2005

1. Update MCT2
2. Support dualcore cpu
3. Modified DMI Pool
4. Add ACPI CPU1 data
5. Delete "an emergy star"

1. Add AMD Rev. E CPU support.
2. Add "Wake-up by Onchip LAN" function.
3. Add LDT frequency item "x1.5" and "x2.5".
4. Add some new USB related items.
5. BIOS compiled date: 04/25/2005

1. Update RAID ROM to v4.81.
2. The CPU Multiplier function now works as intended.
3. Fix the issue that BIOS may hang at ABIT EQ voltage monitoring section if DDR voltage is set to 2.80V.
4. BIOS compiled date: 02/17/2005

1. First release.
2. BIOS compiled date: 02/01/2005

1. Enhanced overclocking ability.
2. BIOS compiled date: 07/03/2006

1. Zwiększenie możliwości overclocking-u
2. Wsparcie dla LPC Flash, SST-49LF040B.
3. Data kompilacji BIOS-u: 05/07/2006

1. Fixed the issue that the external clock cannot be set higher than 277MHz.
2. The CPU frequency now shown correctly when the external clock is over 256MHz.
3. BIOS compiled date: 03/22/2006

1. First release.
2. BIOS compiled date: 11/29/2005

1. Support FX-60
2. Enhanced compatibility with certain USB devices
3. Enhanced compatibility with certain memories.
4. BIOS compiled date: 1/19/2006
   

1. Enhanced compatibility with certain PCI SCSI cards.
2. Add new CPU support.
3. BIOS compiled date: 11/17/2005

1. Enhanced some VGA cards compatibility.
2. Update nVIDIA RAID BIOS to V4.8
3. Enhanced DRAM compatibility.
4. BIOS compiled date: 09/27/2005

1. Recalibrate CPU temperature.2
2. BIOS compiled date: 07/21/2005

1. Change default setting of Cool n' Quiet to "Enable"
2. Change Full screen logo.
3. Cool n' Quiet now works as intended.
4. Fixed the issue that certain VGA card does not work with DVI output.
5. Fixed the issue that some 3D application may not run stable in SLi mode.
6. Change some item in DRAM voltage section.
7. Update AMD MCT2
8. BIOS compiled date: 07/12/2005

1. Update MCT2
2. Support dualcore cpu
3. Modified DMI Pool
4. Add ACPI CPU1 data
5. Delete "an emergy star"

1. Support FX-60
2. Enhanced compatibility with certain USB devices
3. Enhanced compatibility with certain memories.
4. BIOS compiled date: 1/19/2006
   

1. Enhanced compatibility with certain PCI SCSI cards.
2. Add new CPU support.
3. BIOS compiled date: 11/17/2005

1. Enhanced some VGA cards compatibility.
2. Update nVIDIA RAID BIOS to V4.8
3. Enhanced DRAM compatibility.
4. Enhanced some sound cards compatibility.
5. BIOS compiled date: 09/27/2005

1. Recalibrate CPU temperature.2
2. BIOS compiled date: 07/21/2005

1. Change default setting of Cool n' Quiet to "Enable"
2. Change Full screen logo.
3. Cool n' Quiet now works as intended.
4. Fixed the issue that certain VGA card does not work with DVI output.
5. Fixed the issue that some 3D application may not run stable in SLi mode.
6. Change some item in DRAM voltage section.
7. Update AMD MCT2
8. BIOS compiled date: 07/12/2005

1. Update MCT2
2. Support dualcore cpu
3. Modified DMI Pool
4. Add ACPI CPU1 data
5. Delete "an emergy star"

1. First release.
2. BIOS compiled date: 04/25/2005

1. Support FX-60
2. Enhanced compatibility with certain USB devices
3. Enhanced compatibility with certain memories.
4. BIOS compiled date: 1/19/2006
   

1. Enhanced compatibility with certain PCI SCSI cards.
2. Add new CPU support.
3. BIOS compiled date: 11/17/2005

1. Enhanced some VGA cards compatibility.
2. Update nVIDIA RAID BIOS to V4.8
3. Enhanced DRAM compatibility.
4. Enhanced some sound cards compatibility.
5. BIOS compiled date: 09/27/2005

1. Recalibrate CPU temperature.2
2. BIOS compiled date: 07/21/2005

1. Change default setting of Cool n' Quiet to "Enable"
2. Change Full screen logo.
3. Cool n' Quiet now works as intended.
4. Fixed the issue that certain VGA card does not work with DVI output.
5. Fixed the issue that some 3D application may not run stable in SLi mode.
6. Change some item in DRAM voltage section.
7. Update AMD MCT2
8. BIOS compiled date: 07/12/2005

1. Support FX-60
2. Enhanced compatibility with certain USB devices
3. Enhanced compatibility with certain memories.
4. BIOS compiled date: 1/19/2006
   

1. Enhanced compatibility with certain PCI SCSI cards.
2. Add new CPU support.
3. BIOS compiled date: 11/17/2005

1. Enhanced some VGA cards compatibility.
2. Update nVIDIA RAID BIOS to V4.8
3. Enhanced DRAM compatibility.
4. Enhanced some sound cards compatibility.
5. BIOS compiled date: 09/27/2005

1. Recalibrate CPU temperature.2
2. BIOS compiled date: 07/21/2005

1. Change default setting of Cool n' Quiet to "Enable"
2. Change Full screen logo.
3. Cool n' Quiet now works as intended.
4. Fixed the issue that certain VGA card does not work with DVI output.
5. Fixed the issue that some 3D application may not run stable in SLi mode.
6. Change some item in DRAM voltage section.
7. Update AMD MCT2
8. BIOS compiled date: 07/12/2005

1. Update MCT2
2. Support dualcore cpu
3. Modified DMI Pool
4. Add ACPI CPU1 data
5. Delete "an emergy star"

1. First release.
2. BIOS compiled date: 05/20/2005

1. Support DRAM ECC function.
2. Fixed the issue that the system sometimes may not be able to boot when install the CPU A64 X2 3800+ "ADA3800IAA5CU".
3. CPU multiplier adjusting function now works as intended after resuming from S3.
4. BIOS compiled date: 10/23/2006

1. First release.
2. BIOS compiled date: 06/22/2006

1. Recalibrate CPU temperature.
2. BIOS compiled date: 07/22/2005

1. Changed default RTC year to 2005.
2. Added EIST support.
3. Updated CPU micro code.
4. BIOS compiled date: 01/21/2005

1. Added adjustable MAX & MIN multiplier item for certain retail Intel CPUs.
2. Updated CPU micro code.
3. Changed the default setting of "ACPI Suspend Type" to "S3".
4. Changed the default setting of "Resume by USB from S3" to "Enable".
5. Enhanced compatibility with certain SATA DVD-ROMs.
6. BIOS compile date: 10/12/2004

1. Updated CPU micro code.
2. Added CPU FEATURE item.
3. BIOS compile date: 08/18/2004

1. Removed “OC On The Fly” item from ABIT EQ
2. Fixed an issue where the system temperature would be wrong if ABIT EQ Beep Control was disabled.
3. Revised help information in Multiplier factor about not supporting “OC On The Fly”.
4. Added P4 Extreme Edition & Celeron-D logo.
5. Supports µGuru Clock.
6. Updated CPU micro code.
7. Added PWM Temperature maximum to 130 degree C.
8. Revised DMI information.
9. BIOS compile date: 06/28/2004

1. Please use flash utility AWDFLASH v8.32 to update AS8 BIOS
2. First release.
3. BIOS compile date: 04/28/2004

1. Recalibrate CPU temperature.
2. BIOS compiled date: 07/22/2005

1. Changed default RTC year to 2005.
2. Added EIST support.
3. Updated CPU micro code.
4. BIOS compiled date: 01/21/2005

1. Added adjustable MAX & MIN multiplier item for certain retail Intel CPUs.
2. Updated CPU micro code.
3. Changed the default setting of "ACPI Suspend Type" to "S3".
4. Changed the default setting of "Resume by USB from S3" to "Enable".
5. Enhanced compatibility with certain SATA DVD-ROMs.
6. BIOS compile date: 10/12/2004

1. Updated CPU micro code.
2. Added CPU FEATURE item.
3. BIOS compile date: 08/18/2004

1. Recalibrate CPU temperature.
2. BIOS compiled date: 07/22/2005

1. Changed default RTC year to 2005.
2. Added EIST support.
3. Updated CPU micro code.
4. BIOS compiled date: 01/21/2005

1. Added adjustable MAX & MIN multiplier item for certain retail Intel CPUs.
2. Updated CPU micro code.
3. Changed the default setting of "ACPI Suspend Type" to "S3".
4. Changed the default setting of "Resume by USB from S3" to "Enable".
5. Enhanced compatibility with certain SATA DVD-ROMs.
6. BIOS compile date: 10/12/2004

1. Updated CPU micro code.
2. Added CPU FEATURE item.
3. BIOS compile date: 08/18/2004

1. Change the default year after clear CMOS to 2003.
2. Add AMD Duron 1400(133)/1600(133)/1800(133) support.
3. Change the wording "DDR SDRAM at DIMM" to "DDR at DIMM" in order to match the wording on the PCB.
4. BIOS compile date: 08/29/2003.
   

1. Mise à jour du BIOS HPT 374 de la version 1.1 à la version 1.22 afin de régler un problème de séquence de boot particulier qui apparaît lorsque :
   • Utilisation de clavier et souris PS/2 en simultané.
   • HDD connecté en IDE 3 ou 4.
   • CDROM connecté en IDE2.
   • Lorsque les 3 conditions ci dessus sont réunies, la disquette de boot de Windows 98SE n'arrivait pas à trouver certains fichiers système.
2. Fixe un problème de système se mettant en pause après la phase C3 suite à une remise à zero du BIOS avec les modules Samsung DDR K4H560838D.
3. BIOS Compilé le: 10/11/2002.

1. Support des nouveaux processeurs AthlonXP Throughbred 0.13 micron.
2. BIOS HPT 374 Version 1.21.
3. BIOS Compilé le: 05/06/2002.

1. Première version.
2. HPT 374 BIOS Version 1.21.
3. BIOS Compilé le : 04/03/2002.

1. Add AMD Duron 1400(133)/1600(133)/1800(133) support.
2. Fix the issue that the system occasionally hangs at post code 26 if the system is using 133/166 FSB CPU and the power was turned off during boot up procedure when the post code is AE.
3. HPT 374 BIOS version 1.23.
4. BIOS compile date: 08/28/2003.

BIOS ID: DC

1. L'année par défaut du BIOS est 2003.
2. Corrige les problemes de démarrage de l'Athlon XP 1400(100):
   a. Effacer les données CMOS.
   b. Entrer dans le BIOS.
   c. Sauvegarder et sortir sans rien effectuer d'autre.
3. Corrige l'affichage des processeurs à FSB 166MHz.
4. Mise à jour du BIOS Silicon Image Serial ATA RAID (v4.2.00).
5. Date de création du BIOS: 08/01/2003.

1. Provide CPU settings for AMD Athlon XP 2500+/2600+/2800+/3000+(333).

2. Fix LAN transfer error in 96 hours continuous LAN test while CPU/DRAM = 100/133 and 100/166.

3. Revise the CPU and UUID information in DMI pool, and also fill in the SVID/SSID of IDE controller.

4. Fix the issue that Windows 98SE shows corrupt screen with ATI Radeon 9700 pro.

5. Add "Enhance PCI Performance" function to improve PCI RAID performance.

6. Fix "Shutdown When CPU overheat" and "Shutdown When CPU FAN Fail" function failure under Windows 2000.

7. Change ACPI Code to pass HCT ACPI test.

8. HPT374 BIOS version 1.22.

9. BIOS Compile Date: 12/03/2002.

1. Support Athlon XP 2400+, 2600+ CPU. Please be noted that Athlon XP 2400+ and 2600+ CPU need AMD certified heatsink; otherwise, the system will be quite unstable or even fail to boot up. Please check AMD recommended CPU cooler in following URL.  http://www.amd.com/gb-uk/Processors/ComputingSolutions/0,,30_288_1274_3734^4348^4356,00.html
2. Provide CPU multiplier up to 22X in SoftMenu.
3. Enhance DDR333 stability while "Enhance DRAM Performance" enabled.
4. Fix LAN transfer error in 72 hours continuous LAN test while CPU/DRAM = 100/133 and 100/166.
5. Support AMD new coming 333 CPU.
6. In case over clock the CPU frequency higher than 180MHz, don't press reset button otherwise the system will refuse to boot up. It's a auto protect mechanism to prevent possible hardware damage caused by abnormal working environment.
7. HPT 374 BIOS Version 1.21.
8. BIOS compile date: 9/9/2002.

1. Première version.
2. BIOS HPT 374 Version 1.21.
3. BIOS compilé le: 8/12/2002.

1. Support Athlon XP 2400+, 2600+ CPU. Please be noted that Athlon XP 2400+ and 2600+ CPU need AMD certified heatsink; otherwise, the system will be quite unstable or even fail to boot up. Please check AMD recommended CPU cooler in following URL.  http://www.amd.com/gb-uk/Processors/ComputingSolutions/0,,30_288_1274_3734^4348^4356,00.html
2. Provide CPU multiplier up to 22X in SoftMenu.
3. Enhance DDR333 stability while "Enhance DRAM Performance" enabled.
4. Fix LAN transfer error in 72 hours continuous LAN test while CPU/DRAM = 100/133 and 100/166.
5. Support AMD new coming 333 CPU.
6. In case over clock the CPU frequency higher than 180MHz, don't press reset button otherwise the system will refuse to boot up. It's a auto protect mechanism to prevent possible hardware damage caused by abnormal working environment.
7. HPT 374 BIOS Version 1.21.
8. BIOS compile date: 9/9/2002.

1. Première version.
2. BIOS HPT 374 Version 1.21.
3. BIOS compilé le: 8/12/2002.

1. Support DRAM ECC Function..
2. Modify system state error after AC power lose
3. Modify some USB boot and sting fail
4. Modify CAS Latency timing issue
5. Modify auto boot up when inserted USB device.
6. BIOS compiled date: 3/10/2006

1. First release.
2. BIOS compiled date: 12/16/2005

1. The function "S3 resume" now works as intended.
2. The function "cool and quiet" now works as intended with FX60.
3. BIOS compiled date: 05/19/2006

1. Enhanced overclocking ability.
2. Support new LPC Flash, SST-49LF040B
3. BIOS compiled date: 04/25/2006

1. First release.
2. BIOS compiled date: 03/20/2006
   

1. Fixed the issue that the system may not be able to boot when installed the processor of Rev. E
2. Enhanced compatibility with certain PCI RAID cards.
3. Support FX60.
4. BIOS compiled date: 02/23/2006

1. Enhanced compatibility with certain VGA cards.
2. Enhanced compatibility with certain PCI SCSI cards.
3. Add new CPU support.
4. BIOS compiled date: 11/08/2005

1. Fixed the issue that with certain VGA card does not work with four 1GB RAM modules.
2. DRAM Command Rate, Row Refresh Cycle Time, Read to Write Delay now work as intended.
3. Recalibrate CPU temperature.
4. System now can resume from S3 without problem.
5. BIOS compiled date: 07/28/2005

1. Cool n' Quiet now works as intended.
2. Disable Cool n' Quiet function when the multiplier is manually changed in the BIOS.3
3. BIOS compiled date: 07/04/2005

1. Update code base to 5/31 award code
2. Update MCT2
3. Support dualcore cpu
4. Fix "CMOS Checksum fail message" when select DRAM Timing value.
5. Delete "workstation" at POST
6. Full screen logo
7. Fixed "can not load SATA , LAN ROM issue"

1. Add AMD Rev. E CPU support.
2. Add new DRAM timing items.
3. BIOS compiled date: 04/20/2005

1. Add RocketBoy AV8 support.
2. Change the default RTC year to 2005.
3. Fixed minor DRAM timing issue.
4. BIOS compiled date: 01/19/2005

1. Updated µGuru Utility to uav8_019.bin.
2. Updated SATA ROM.
3. Added "Delay Transactions" item.
4. Added "PCI Latency Timer function" item.
5. Removed an error message that appears if the year is modified and a SAVE&EXIT is executed.
6. Fixed an issue where pressing TAB key to skip the OSB logo caused the Memory Information & Memory Clock to be missing.
7. Changed "USB 2.0 Controller" defaulted to "Enabled", and synchronized it with the "OnChip USB Controller" setting.
8. Synchronized "DDR Voltage" & "SB Voltage" in the PC Health item if modified.
9. Changed "Resume by OnChip USB" default to "Enabled".
10. Changed "ACPI Suspend Type" default to "S3".
11. Added DMI information.
12. Calibrated CPU temperature.
13. Added "Dual Channel Enabled 128bit" when in Dual Channel mode.
14. BIOS compile date: 11/12/2004

1. Enhanced compatibility with D0 stepping FX-55 and 3200+ CPUs.
2. BIOS compile date: 10/12/2004

1. Updated µGuru Utility to uAV8_017.BIN.
2. Updated CPU micro code.
3. Calibrated CPU temperature.
4. Calibrated "Delay IDE Initial" function timing.
5. Default ACPI Suspend Type changed to S3.
6. Fixed abnormal warning beep.
7. BIOS compile date: 09/17/2004

1. Updated uGuru Utility to uAV8_015.BIN.
2. Fixed non-adjustable "Shutdown Temp" & "Beep Temp" items in ABIT-EQ Temperature Monitoring.
3. Calibrated certain CPU frequency issues.
4. BIOS compile date: 09/03/2004

1. First Release.
2. BIOS compile date: 05/25/2004

1. Fixed the issue that the system may not be able to boot when installed the processor of Rev. E
2. Enhanced compatibility with certain PCI RAID cards.
3. Support FX60.
4. BIOS compiled date: 02/23/2006

1. Enhanced compatibility with certain VGA cards.
2. Enhanced compatibility with certain PCI SCSI cards.
3. Add new CPU support.
4. BIOS compiled date: 11/08/2005

1. Fixed the issue that with certain VGA card does not work with four 1GB RAM modules.
2. DRAM Command Rate, Row Refresh Cycle Time, Read to Write Delay now work as intended.
3. Recalibrate CPU temperature.
4. System now can resume from S3 without problem.
5. BIOS compiled date: 07/28/2005

1. Cool n' Quiet now works as intended.
2. Disable Cool n' Quiet function when the multiplier is manually changed in the BIOS.3
3. BIOS compiled date: 07/04/2005

1. Update code base to 5/31 award code
2. Update MCT2
3. Support dualcore cpu
4. Fix "CMOS Checksum fail message" when select DRAM Timing value.
5. Delete "workstation" at POST
6. Full screen logo
7. Fixed "can not load SATA , LAN ROM issue"

1. Add AMD Rev. E CPU support.
2. Add new DRAM timing items.
3. BIOS compiled date: 04/20/2005

1. Add RocketBoy AV8 support.
2. Change the default RTC year to 2005.
3. Fixed minor DRAM timing issue.
4. BIOS compiled date: 01/19/2005

1. Updated µGuru Utility to uav8_019.bin.
2. Updated SATA ROM.
3. Added "Delay Transactions" item.
4. Added "PCI Latency Timer function" item.
5. Removed an error message that appears if the year is modified and a SAVE&EXIT is executed.
6. Fixed an issue where pressing TAB key to skip the OSB logo caused the Memory Information & Memory Clock to be missing.
7. Changed "USB 2.0 Controller" defaulted to "Enabled", and synchronized it with the "OnChip USB Controller" setting.
8. Synchronized "DDR Voltage" & "SB Voltage" in the PC Health item if modified.
9. Changed "Resume by OnChip USB" default to "Enabled".
10. Changed "ACPI Suspend Type" default to "S3".
11. Added DMI information.
12. Calibrated CPU temperature.
13. Added "Dual Channel Enabled 128bit" when in Dual Channel mode.
14. BIOS compile date: 11/12/2004

1. Enhanced compatibility with D0 stepping FX-55 and 3200+ CPUs.
2. BIOS compile date: 10/12/2004

1. Updated µGuru Utility to uAV8_017.BIN.
2. Updated CPU micro code.
3. Calibrated CPU temperature.
4. Calibrated "Delay IDE Initial" function timing.
5. Default ACPI Suspend Type changed to S3.
6. Fixed abnormal warning beep.
7. BIOS compile date: 09/17/2004

1. Updated uGuru Utility to uAV8_015.BIN.
2. Fixed non-adjustable "Shutdown Temp" & "Beep Temp" items in ABIT-EQ Temperature Monitoring.
3. Calibrated certain CPU frequency issues.
4. BIOS compile date: 09/03/2004

1. First Release.
2. BIOS compile date: 05/25/2004

1. The Geforce7950GX2 now works as intended with 4GB memories
2. BIOS compiled date: 08/11/2006

1. Support Pentium EE 965.
2. Fixed the issue that IDE HDDs may not be detected after clearing CMOS.
3. Enhanced compatibility with Pentium 4 EE Processors.
4. Enhanced compatibility with certain memories.
5. BIOS compiled date: 05/22/2006

1. Enhanced compatibility with certain DDR2-667 memories.
2. Update CPU micro code.
3. The POST screen now show correctly when ATI X1300 VGA card installed.
4. BIOS compiled date: 1/23/2006
   
   

1. Support Presler/ Cedar Mill CPU.
2. Support DDR2-800.
3. Support four 2GB memory.
4. Enhanced compatibility with certain PCI SCSI cards.
5. BIOS compiled date: 11/30/2005

1. System now can resume from S3 without problem.
2. Add new item "Disable unused PCI clock" enable/disable" function.
3. The function "On-Chip Audio Controller" now works as intended.
4. Update CPU micro code
5. BIOS compiled date: 10/04/2005

1. Fixed the issue that the system may not be able to boot up from SiliconImage RAID controller when Intel RAID BIOS is enabled.
2. Memory frequency will be shown correctly when N/B Strap CPU as is set to "By CPU"
3. Pentium Extreme edition CPU now works as intended when HT is set disabled.
4. Enhanced DRAM compatibility.
5. Add new item "On chip SATA RAID BIOS" enable/disable" function.
6. BIOS compiled date: 09/13/2005

1. Enhanced DRAM compatibility.
2. Pentium D 840 now shows correct core voltage and frequency in the BIOS.
3. The color of the phone jack in the driver now matches the back panel.
4. Update CPU micro code.
5. Fixed the issue that the frequencies of a dual core processor may be different when C1E and EIST is set disabled.
6. BIOS compiled date: 07/29/2005

1. Pentium D processors now can be correctly detected by the BIOS.
2. Add FSB 533MHz CPU support.
3. tRAS will be shown correctly now.
4. Fixed the issue that Windows can only recognize 2GB memory when there are 4GB installed.
5. Add new item "EIST Function".
6. BIOS compiled date: 07/12/2005

1. The Geforce7950GX2 now works as intended with 4GB memories
2. BIOS compiled date: 08/11/2006

1. Support Pentium EE 965.
2. Fixed the issue that IDE HDDs may not be detected after clearing CMOS.
3. Enhanced compatibility with Pentium 4 EE Processors.
4. Enhanced compatibility with certain memories.
5. BIOS compiled date: 05/22/2006

1. Enhanced compatibility with certain DDR2-667 memories.
2. Update CPU micro code.
3. The POST screen now show correctly when ATI X1300 VGA card installed.
4. BIOS compiled date: 1/23/2006
   
   

1. Support Presler/ Cedar Mill CPU.
2. Support DDR2-800.
3. Support four 2GB memory.
4. Enhanced compatibility with certain PCI SCSI cards.
5. BIOS compiled date: 11/30/2005

1. System now can resume from S3 without problem.
2. Add new item "Disable unused PCI clock" enable/disable" function.
3. The function "On-Chip Audio Controller" now works as intended.
4. Update CPU micro code
5. BIOS compiled date: 10/04/2005

1. Fixed the issue that the system may not be able to boot up from SiliconImage RAID controller when Intel RAID BIOS is enabled.
2. Memory frequency will be shown correctly when N/B Strap CPU as is set to "By CPU"
3. Pentium Extreme edition CPU now works as intended when HT is set disabled.
4. Enhanced DRAM compatibility.
5. Add new item "On chip SATA RAID BIOS" enable/disable" function.
6. BIOS compiled date: 09/13/2005

1. Enhanced DRAM compatibility.
2. Pentium D 840 now shows correct core voltage and frequency in the BIOS.
3. The color of the phone jack in the driver now matches the back panel.
4. Update CPU micro code.
5. Fixed the issue that the frequencies of a dual core processor may be different when C1E and EIST is set disabled.
6. BIOS compiled date: 07/29/2005

1. Pentium D processors now can be correctly detected by the BIOS.
2. Add FSB 533MHz CPU support.
3. tRAS will be shown correctly now.
4. Fixed the issue that Windows can only recognize 2GB memory when there are 4GB installed.
5. Add new item "EIST Function".
6. BIOS compiled date: 07/12/2005

1. First release.
2. BIOS compiled date: 05/24/2005