|
|
|
|
You may want to know:
How to update the bios? Please click
here.
Besides downloading the bios file, you also need the Flash
Utility to flash bios rom. (For files before Aug 2001)
- For more FAQs about BIOS relationship, click here
please.
- You won't need to update BIOS until the latest bios has improve / fix some
functions.
- You won't need to upgrade through all of the BIOS files, just upgrade to
the latest one please and it will include all previous improvments.
- The CMOS data will be lost after flashing the BIOS. You may need to enter
the BIOS setup screen and configure your system information after rebooting
the machine.
| Motherboard>Socket A>AN7
| Bios Issue Date:2004/07/30 | BIOS ID:1.6 | |
- Added "Wake Up By OnChip LAN" item.
- Fixed a problem where the system cannot boot into Windows if
- The OS is installed in the SATA hard disk when both the SATA and PATA hard disks are present.
- The PATA hard disk is removed after the OS installation.
- Corrected "Restore on AC Power Loss" item.
- Fixed OS shutdown function failure if "USB Mouse Support via BIOS" is enabled.
- BIOS compile date: 07/30/2004
|
| Bios Issue Date:2004/03/04 | BIOS ID:1.5 | |
- Please use the AWDFLASH
v8.24F flash utility to update the AN7 BIOS.
- Added Auto-Shutdown function when CCMOS jumper is set to pins 2-3. The correct
CCMOS jumper should be on pins 1-2; in case it is placed on 2-3, the CPU core
voltage will be abnormally high, an the system will shut down automatically
to protect the CPU from damage.
- Fixed an issue where USB-ZIP will be detected as a harddisk.
- Updated SI3112 SATA BIOS to v4.2.47.
- Revised the characters in "Wakeup by Alarm".
- Enhanced USB 2.0 device compatibility, "Integrated Peripherals / OnChip
PCI Device / USB 2.0 Device Compatible / Disabled -> Enabled".
- Fixed an issue where SCSI boot ID cannot be selected when certain SCSI cards
are installed.
- Fixed an issue where SATA HDD boot up will fail if a PS/2 mouse is not installed.
- Fixed an issue where the system will show 119 degrees under certain circumstances.
- BIOS compile date: 03/04/2004.
|
| Bios Issue Date:2004/01/06 | BIOS ID:1.4 | |
- Please use the AWDFLASH
v8.24F flash utility to update the AN7 BIOS.
- Changed default RTC year to 2004.
- Updated Silicon Image 3112 controller ROM to version 4.2.43.
- Added CPU fan fail warning option.
- Added AGP frequency on the fly option.
- Saved CPU default ratio to µGuru.
- Added SATA ROM control option.
- Fixed mouse power on fails to function when using certain mice.
- Enhanced compatibility with WD400AB hard disk.
- Synchronized FanEQ temperature settings with OC Guru.
- Reduced the time it takes to resume from STR state when using Windows 98
and Windows ME.
- Added "Full screen logo show" option.
- BIOS compile date: 01/06/2004
|
| Bios Issue Date:2003/11/13 | BIOS ID:1.3 | |
- Please use the AWDFLASH
v8.24F flash utility to update the AN7 BIOS.
- Fixed the problem where after pressing "F8" for OC on the fly
and then pressing ESC, the image on screen will become distorted.
- Fixed the wake on ring fail problem.
- Fixed the problem where a SATA hard disk will not respond after resuming
from S3 mode.
- Updated DRAM DMI information and revised the wording of memory status from
"DDR SDRAM at Bank" to "DDR at DIMM" in the system configuration
table.
- Fixed the problem where the DRAM timing is not changed after saving and
exiting the BIOS.
- Enhanced SATA device stability.
- Added resume from S3/S4 mode using USB devices.
- Fixed the problem where the system cannot boot into Windows if
- The OS is installed in the SATA hard disk when both the SATA and PATA
hard disks are present
- The PATA hard disk is removed after the OS installation.
- BIOS compile date: 11/13/2003
|
| Bios Issue Date:2003/11/11 | BIOS ID:1.2 | |
- Please use flash utility
AWDFLASH v8.24F to update AN7 BIOS.
- First release.
- BIOS compile date: 11/11/2003
|
|
|
| |
ABIT GLOBAL HOME
|
Motherboards
|
VGA Cards
|
Accessories
|
Server/Workstation
|
DigiDice
|
Thecus |
