1. The POST screen now show correctly when ATI X1300 VGA card installed.
2. BIOS compiled date: 1/17/2006

1. Recalibrate CPU temperature.
2. Enhance the IDE RAID card compatibility.
3. BIOS compiled date: 08/11/2005

1. The EIST function now works on an Intel 630 processor.
2. Audio now works as intended after resuming from S3 mode.
3. Add new CPU micro code.
4. BIOS compiled date: 04/18/2005

1. Fixed the issue that system may hang when pressing ALT-F2 at full screen logo screen.
2. Fixed minor wording issue when CPU with 2M L2 cache is installed.
3. Change the adjustable FSB range to 500MHz.
4. Added new item "Execute Disable Bit" and set the default to "Disable".
5. Added EIST control item.
6. Add "C1E Function" control item.
7. Fixed the issue that system may hang when SATA port 4 in used.
8. BIOS compiled date: 03/23/2005

1. Add EIST support.
2. Enhance four 1GB memory support.
3. FlashMenu now works when using EM64T CPU.
4. Enhance DRAM compatibility.
5. BIOS compiled date: 02/01/2005

1. Added EM64T wording on screen.
2. Added "CPU Operating Speed" item adjustable with FSB 1066 CPUs.
3. Enhanced PCI-E VGA performance.
4. Fixed system hang when CMOS is cleared by Award Flash tool & SATA set as RAID.
5. Corrected CPU brand name with certain FSB 1066 CPUs.
6. Corrected "DRAM Frequency" wording in OC Guru.
7. Supports FSB 1066 CPU overclocking function in µGuru Preset Mode.
8. Enhanced stability with P4EE CPUs.
9. Calibrated certain CPU voltages in Preset Mode.
10. Calibrated Hi Limit value of NB Voltage in ABIT EQ.
11. Changed default RTC year to 2005.
12. BIOS compile date: 01/03/2005

1. Add support AA8XE.
2. Fixed an issue where after clear CMOS & into BIOS setting but not Load Optimized Default CPU clock show 0000MHz.
3. Add wording "Interleaved Mode" or "Asymmetric Mode" after Dual Channel.
4. Adjust CPU FAN Speed Low Limit to 300RPM.
5. Add adjustable MAX & MIN multiplier item for certain retail INTEL CPU.
6. Update CPU micro code.
7. Fixed an auto wake up issue if system resume from standby mode before.
8. Preserve USER Preset Mode in OC Guru, if CPU change.
9. BIOS compile date: 10/01/2004

1. Updated CPU micro code.
2. If system memory is not installed, an alarm will sound.
3. Added "CPU feature" item in "Advanced BIOS Features".
4. If FSB=533Mhz, DDR ratio=2:3.
5. Fixed a POST failure issue if the TAB key is pressed continuously.
6. Enabled "SATA MODE" item if "Onchip Serial ATA model" is set to "AUTO".
7. Fixed an issue where "PCI-E Compliancy Mode" in "v1.0" results in a COMS CHECK COMS error.
8. BIOS compile date: 08/20/2004

1. Enhanced CPU stability over 250MHz.
2. Added "DDR600" item.
3. Added "Game Accelerator" item.
4. Enhanced SATA HDD stability.
5. Added "Interleaved Mode" or "Asymmetric Mode" wording for Dual Channel mode, "Single Channel" for Single mode.
6. BIOS compile date: 07/22/2004

1. Supports P4 Extreme Edition CPUs
2. Added DRAM Frequency & HOST/DRAM Clock items to post screen
3. Added PWM Temperature 1 & 2 shutdown temperature maximums to 130 degree C.
4. Revised DMI information.
5. Updated CPU micro code.
6. BIOS compile date: 06/25/2004

1. Erste Ausgabe.
2. BIOS Erscheinungsdatum: 26/05/2004

1. The POST screen now show correctly when ATI X1300 VGA card installed.
2. BIOS compiled date: 1/17/2006

1. Recalibrate CPU temperature.
2. Enhance the IDE RAID card compatibility.
3. BIOS compiled date: 08/11/2005

1. The EIST function now works on an Intel 630 processor.
2. Audio now works as intended after resuming from S3 mode.
3. Add new CPU micro code.
4. BIOS compiled date: 04/18/2005

1. Fixed the issue that system may hang when pressing ALT-F2 at full screen logo screen.
2. Fixed minor wording issue when CPU with 2M L2 cache is installed.
3. Change the adjustable FSB range to 500MHz.
4. Added new item "Execute Disable Bit" and set the default to "Disable".
5. Added EIST control item.
6. Add "C1E Function" control item.
7. Fixed the issue that system may hang when SATA port 4 in used.
8. BIOS compiled date: 03/23/2005

1. Add EIST support.
2. Enhance four 1GB memory support.
3. FlashMenu now works when using EM64T CPU.
4. Enhance DRAM compatibility.
5. BIOS compiled date: 02/01/2005

1. Added EM64T wording on screen.
2. Added "CPU Operating Speed" item adjustable with FSB 1066 CPUs.
3. Enhanced PCI-E VGA performance.
4. Fixed system hang when CMOS is cleared by Award Flash tool & SATA set as RAID.
5. Corrected CPU brand name with certain FSB 1066 CPUs.
6. Corrected "DRAM Frequency" wording in OC Guru.
7. Supports FSB 1066 CPU overclocking function in µGuru Preset Mode.
8. Enhanced stability with P4EE CPUs.
9. Calibrated certain CPU voltages in Preset Mode.
10. Calibrated Hi Limit value of NB Voltage in ABIT EQ.
11. Changed default RTC year to 2005.
12. BIOS compile date: 01/03/2005

1. Add support AA8XE.
2. Fixed an issue where after clear CMOS & into BIOS setting but not Load Optimized Default CPU clock show 0000MHz.
3. Add wording "Interleaved Mode" or "Asymmetric Mode" after Dual Channel.
4. Adjust CPU FAN Speed Low Limit to 300RPM.
5. Add adjustable MAX & MIN multiplier item for certain retail INTEL CPU.
6. Update CPU micro code.
7. Fixed an auto wake up issue if system resume from standby mode before.
8. Preserve USER Preset Mode in OC Guru, if CPU change.
9. BIOS compile date: 10/01/2004

1. Updated CPU micro code.
2. If system memory is not installed, an alarm will sound.
3. Added "CPU feature" item in "Advanced BIOS Features".
4. If FSB=533Mhz, DDR ratio=2:3.
5. Fixed a POST failure issue if the TAB key is pressed continuously.
6. Enabled "SATA MODE" item if "Onchip Serial ATA model" is set to "AUTO".
7. Fixed an issue where "PCI-E Compliancy Mode" in "v1.0" results in a COMS CHECK COMS error.
8. BIOS compile date: 08/20/2004

1. Enhanced CPU stability over 250MHz.
2. Added "DDR600" item.
3. Added "Game Accelerator" item.
4. Enhanced SATA HDD stability.
5. Added "Interleaved Mode" or "Asymmetric Mode" wording for Dual Channel mode, "Single Channel" for Single mode.
6. BIOS compile date: 07/22/2004

1. Supports P4 Extreme Edition CPUs
2. Added DRAM Frequency & HOST/DRAM Clock items to post screen
3. Added PWM Temperature 1 & 2 shutdown temperature maximums to 130 degree C.
4. Revised DMI information.
5. Updated CPU micro code.
6. BIOS compile date: 06/25/2004

1. Erste Ausgabe.
2. BIOS Erscheinungsdatum: 26/05/2004

1. The POST screen now show correctly when ATI X1300 VGA card installed.
2. BIOS compiled date: 1/17/2006

1. Recalibrate CPU temperature.
2. Enhance the IDE RAID card compatibility.
3. BIOS compiled date: 08/11/2005

1. The EIST function now works on an Intel 630 processor.
2. Audio now works as intended after resuming from S3 mode.
3. Add new CPU micro code.
4. BIOS compiled date: 04/18/2005

1. Fixed the issue that system may hang when pressing ALT-F2 at full screen logo screen.
2. Fixed minor wording issue when CPU with 2M L2 cache is installed.
3. Change the adjustable FSB range to 500MHz.
4. Added new item "Execute Disable Bit" and set the default to "Disable".
5. Added EIST control item.
6. Add "C1E Function" control item.
7. Fixed the issue that system may hang when SATA port 4 in used.
8. BIOS compiled date: 03/23/2005

1. Add EIST support.
2. Enhance four 1GB memory support.
3. FlashMenu now works when using EM64T CPU.
4. Enhance DRAM compatibility.
5. BIOS compiled date: 02/01/2005

1. Added EM64T wording on screen.
2. Added "CPU Operating Speed" item adjustable with FSB 1066 CPUs.
3. Enhanced PCI-E VGA performance.
4. Fixed system hang when CMOS is cleared by Award Flash tool & SATA set as RAID.
5. Corrected CPU brand name with certain FSB 1066 CPUs.
6. Corrected "DRAM Frequency" wording in OC Guru.
7. Supports FSB 1066 CPU overclocking function in µGuru Preset Mode.
8. Enhanced stability with P4EE CPUs.
9. Calibrated certain CPU voltages in Preset Mode.
10. Calibrated Hi Limit value of NB Voltage in ABIT EQ.
11. Changed default RTC year to 2005.
12. BIOS compile date: 01/03/2005

1. Add support AA8XE.
2. Fixed an issue where after clear CMOS & into BIOS setting but not Load Optimized Default CPU clock show 0000MHz.
3. Add wording "Interleaved Mode" or "Asymmetric Mode" after Dual Channel.
4. Adjust CPU FAN Speed Low Limit to 300RPM.
5. Add adjustable MAX & MIN multiplier item for certain retail INTEL CPU.
6. Update CPU micro code.
7. Fixed an auto wake up issue if system resume from standby mode before.
8. Preserve USER Preset Mode in OC Guru, if CPU change.
9. BIOS compile date: 10/01/2004

1. The POST screen now show correctly when ATI X1300 VGA card installed.
2. BIOS compiled date: 1/17/2006

1. Recalibrate CPU temperature.
2. Enhance the IDE RAID card compatibility.
3. BIOS compiled date: 08/11/2005

1. The EIST function now works on an Intel 630 processor.
2. Audio now works as intended after resuming from S3 mode.
3. Add new CPU micro code.
4. BIOS compiled date: 04/18/2005

1. Fixed the issue that system may hang when pressing ALT-F2 at full screen logo screen.
2. Fixed minor wording issue when CPU with 2M L2 cache is installed.
3. Change the adjustable FSB range to 500MHz.
4. Added new item "Execute Disable Bit" and set the default to "Disable".
5. Added EIST control item.
6. Add "C1E Function" control item.
7. Fixed the issue that system may hang when SATA port 4 in used.
8. BIOS compiled date: 03/23/2005

1. Add EIST support.
2. Enhance four 1GB memory support.
3. FlashMenu now works when using EM64T CPU.
4. Enhance DRAM compatibility.
5. BIOS compiled date: 02/01/2005

1. Added EM64T wording on screen.
2. Added "CPU Operating Speed" item adjustable with FSB 1066 CPUs.
3. Enhanced PCI-E VGA performance.
4. Fixed system hang when CMOS is cleared by Award Flash tool & SATA set as RAID.
5. Corrected CPU brand name with certain FSB 1066 CPUs.
6. Corrected "DRAM Frequency" wording in OC Guru.
7. Supports FSB 1066 CPU overclocking function in µGuru Preset Mode.
8. Enhanced stability with P4EE CPUs.
9. Calibrated certain CPU voltages in Preset Mode.
10. Calibrated Hi Limit value of NB Voltage in ABIT EQ.
11. Changed default RTC year to 2005.
12. BIOS compile date: 01/03/2005

1. Add support AA8XE.
2. Fixed an issue where after clear CMOS & into BIOS setting but not Load Optimized Default CPU clock show 0000MHz.
3. Add wording "Interleaved Mode" or "Asymmetric Mode" after Dual Channel.
4. Adjust CPU FAN Speed Low Limit to 300RPM.
5. Add adjustable MAX & MIN multiplier item for certain retail INTEL CPU.
6. Update CPU micro code.
7. Fixed an auto wake up issue if system resume from standby mode before.
8. Preserve USER Preset Mode in OC Guru, if CPU change.
9. BIOS compile date: 10/01/2004

1. The POST screen now show correctly when ATI X1300 VGA card installed.
2. Update CPU micro code.
3. BIOS compiled date: 1/10/2006
   

1. Recalibrate CPU temperature.
2. BIOS compiled date: 08/04/2005

1. Fixed the issue that the EIST function does not work with Intel 630 processor
2. BIOS compiled date: 04/14/2005

1. Fixed the issue that system may hang when pressing ALT-F2 at full screen logo screen.
2. Fixed minor wording issue when CPU with 2M L2 cache is installed.
3. Change the adjustable FSB range to 500MHz.
4. Change the default setting of "Execute Disable Bit" to "Disable".
5. Added EIST control item.
6. Add "C1E Function" control item.7
7. Fixed the issue that system may hang when SATA port 4 in used.
8. BIOS compiled date: 03/23/2005

1. Enhance four 1GB memory support.
2. FlashMenu now works when using EM64T CPU.
3. BIOS compiled date: 02/02/2005

1. Added RocketBoy AG8 supported.
2. Added EIST support.
3. BIOS compile date: 01/18/2005

1. Updated CPU micro code.
2. Enhanced compatibility with P4EE CPUs.
3. Added EM64T wording on screen.
4. Enhanced PCI-E VGA performance.
5. Fixed system hang from clear CMOS by Award Flash tool & SATA as RAID function.
6. Fixed DRAM ratio wording with FSB 533 CPU.
7. Changed default RTC year to 2005.
8. BIOS compile date: 01/03/2005

1. Updated CPU micro code.
2. Fixed an issue where where the CPU clock would display 0000MHz after clearing the CMOS and BIOS setting but not selecting "Load Optimized Defaults".
3. Shows DRAM type when full screen logo is disabled.
4. Adjusted CPU fan speed lower limit to 300RPM.
5. Removed DDR600 item.
6. Added adjustable MAX and MIN multiplier item for certain retail INTEL CPUs.
7. Fixed an auto wake up issue which affected systems resuming from standby mode.
8. BIOS compile date: 09/22/2004

1. Changed default stand-by mode from S1 to S3 to meet WHQL requirement. This function should be accompanied by changing USB-PWR Jumper setting from default 1-2 (disabled wake-up) to 2-3 (enabled wake-up). Please refer to user's manual and check correct jumper position.
2. BIOS compile date: 09/09/2004

1. Updated CPU micro code.
2. If system memory is not installed, an alarm will sound.
3. Added "CPU feature" item in "Advanced BIOS Features".
4. If FSB=533Mhz, DDR ratio=2:3.
5. Fixed a POST fail issue if the TAB key is pressed continuously.
6. Enabled "SATA MODE" item if "Onchip Serial ATA model" is set to "AUTO".
7. Fixed an issue where the "Restore on AC Power Loss" function would fail.
8. BIOS compile date: 08/20/2004

1. Shows CPU Clock value from AC2003.
2. Added "Interleaved Mode" or "Asymmetric Mode" wording after Dual Channel.
3. Corrected "Restore on AC Power Loss" item.
4. Added notification when no 80-wire cable is installed.
5. BIOS compile date: 07/07/2004

1. Supports AG8-V.
2. Supports P4 Extreme Edition CPUs.
3. Added DRAM Frequency & HOST/DRAM Clock items to post screen.
4. Added PWM Temperature 1 & 2 shutdown temperature maximums to 130 degree C.
5. Revised DMI information.
6. Updated CPU micro code.
7. BIOS compile date: 06/25/2004

1. Erste Ausgabe.
2. BIOS Erscheinungsdatum: 28/05/2004

1. The POST screen now show correctly when ATI X1300 VGA card installed.
2. Update CPU micro code.
3. BIOS compiled date: 1/10/2006
   

1. Recalibrate CPU temperature.
2. BIOS compiled date: 08/04/2005

1. Fixed the issue that the EIST function does not work with Intel 630 processor
2. BIOS compiled date: 04/14/2005

1. Fixed the issue that system may hang when pressing ALT-F2 at full screen logo screen.
2. Fixed minor wording issue when CPU with 2M L2 cache is installed.
3. Change the adjustable FSB range to 500MHz.
4. Change the default setting of "Execute Disable Bit" to "Disable".
5. Added EIST control item.
6. Add "C1E Function" control item.7
7. Fixed the issue that system may hang when SATA port 4 in used.
8. BIOS compiled date: 03/23/2005

1. Enhance four 1GB memory support.
2. FlashMenu now works when using EM64T CPU.
3. BIOS compiled date: 02/02/2005

1. Added RocketBoy AG8 supported.
2. Added EIST support.
3. BIOS compile date: 01/18/2005

1. Updated CPU micro code.
2. Enhanced compatibility with P4EE CPUs.
3. Added EM64T wording on screen.
4. Enhanced PCI-E VGA performance.
5. Fixed system hang from clear CMOS by Award Flash tool & SATA as RAID function.
6. Fixed DRAM ratio wording with FSB 533 CPU.
7. Changed default RTC year to 2005.
8. BIOS compile date: 01/03/2005

1. Updated CPU micro code.
2. Fixed an issue where where the CPU clock would display 0000MHz after clearing the CMOS and BIOS setting but not selecting "Load Optimized Defaults".
3. Shows DRAM type when full screen logo is disabled.
4. Adjusted CPU fan speed lower limit to 300RPM.
5. Removed DDR600 item.
6. Added adjustable MAX and MIN multiplier item for certain retail INTEL CPUs.
7. Fixed an auto wake up issue which affected systems resuming from standby mode.
8. BIOS compile date: 09/22/2004

1. Changed default stand-by mode from S1 to S3 to meet WHQL requirement. This function should be accompanied by changing USB-PWR Jumper setting from default 1-2 (disabled wake-up) to 2-3 (enabled wake-up). Please refer to user's manual and check correct jumper position.
2. BIOS compile date: 09/09/2004

1. Updated CPU micro code.
2. If system memory is not installed, an alarm will sound.
3. Added "CPU feature" item in "Advanced BIOS Features".
4. If FSB=533Mhz, DDR ratio=2:3.
5. Fixed a POST fail issue if the TAB key is pressed continuously.
6. Enabled "SATA MODE" item if "Onchip Serial ATA model" is set to "AUTO".
7. Fixed an issue where the "Restore on AC Power Loss" function would fail.
8. BIOS compile date: 08/20/2004

1. Shows CPU Clock value from AC2003.
2. Added "Interleaved Mode" or "Asymmetric Mode" wording after Dual Channel.
3. Corrected "Restore on AC Power Loss" item.
4. Added notification when no 80-wire cable is installed.
5. BIOS compile date: 07/07/2004

1. Supports AG8-V.
2. Supports P4 Extreme Edition CPUs.
3. Added DRAM Frequency & HOST/DRAM Clock items to post screen.
4. Added PWM Temperature 1 & 2 shutdown temperature maximums to 130 degree C.
5. Revised DMI information.
6. Updated CPU micro code.
7. BIOS compile date: 06/25/2004

1. Erste Ausgabe.
2. BIOS Erscheinungsdatum: 28/05/2004

1. The POST screen now show correctly when ATI X1300 VGA card installed.
2. Update CPU micro code.
3. BIOS compiled date: 1/10/2006
   

1. Recalibrate CPU temperature.
2. BIOS compiled date: 08/04/2005

1. Fixed the issue that the EIST function does not work with Intel 630 processor
2. BIOS compiled date: 04/14/2005

1. Fixed the issue that system may hang when pressing ALT-F2 at full screen logo screen.
2. Fixed minor wording issue when CPU with 2M L2 cache is installed.
3. Change the adjustable FSB range to 500MHz.
4. Change the default setting of "Execute Disable Bit" to "Disable".
5. Added EIST control item.
6. Add "C1E Function" control item.7
7. Fixed the issue that system may hang when SATA port 4 in used.
8. BIOS compiled date: 03/23/2005

1. Enhance four 1GB memory support.
2. FlashMenu now works when using EM64T CPU.
3. BIOS compiled date: 02/02/2005

1. Added RocketBoy AG8 supported.
2. Added EIST support.
3. BIOS compile date: 01/18/2005

1. Updated CPU micro code.
2. Enhanced compatibility with P4EE CPUs.
3. Added EM64T wording on screen.
4. Enhanced PCI-E VGA performance.
5. Fixed system hang from clear CMOS by Award Flash tool & SATA as RAID function.
6. Fixed DRAM ratio wording with FSB 533 CPU.
7. Changed default RTC year to 2005.
8. BIOS compile date: 01/03/2005

1. Updated CPU micro code.
2. Fixed an issue where where the CPU clock would display 0000MHz after clearing the CMOS and BIOS setting but not selecting "Load Optimized Defaults".
3. Shows DRAM type when full screen logo is disabled.
4. Adjusted CPU fan speed lower limit to 300RPM.
5. Removed DDR600 item.
6. Added adjustable MAX and MIN multiplier item for certain retail INTEL CPUs.
7. Fixed an auto wake up issue which affected systems resuming from standby mode.
8. BIOS compile date: 09/22/2004

1. Changed default stand-by mode from S1 to S3 to meet WHQL requirement. This function should be accompanied by changing USB-PWR Jumper setting from default 1-2 (disabled wake-up) to 2-3 (enabled wake-up). Please refer to user's manual and check correct jumper position.
2. BIOS compile date: 09/09/2004

1. Updated CPU micro code.
2. If system memory is not installed, an alarm will sound.
3. Added "CPU feature" item in "Advanced BIOS Features".
4. If FSB=533Mhz, DDR ratio=2:3.
5. Fixed a POST fail issue if the TAB key is pressed continuously.
6. Enabled "SATA MODE" item if "Onchip Serial ATA model" is set to "AUTO".
7. Fixed an issue where the "Restore on AC Power Loss" function would fail.
8. BIOS compile date: 08/20/2004

1. Shows CPU Clock value from AC2003.
2. Added "Interleaved Mode" or "Asymmetric Mode" wording after Dual Channel.
3. Corrected "Restore on AC Power Loss" item.
4. Added notification when no 80-wire cable is installed.
5. BIOS compile date: 07/07/2004

1. Supports AG8-V.
2. Supports P4 Extreme Edition CPUs.
3. Added DRAM Frequency & HOST/DRAM Clock items to post screen.
4. Added PWM Temperature 1 & 2 shutdown temperature maximums to 130 degree C.
5. Revised DMI information.
6. Updated CPU micro code.
7. BIOS compile date: 06/25/2004

1. Erste Ausgabe.
2. BIOS Erscheinungsdatum: 28/05/2004

1. Added adjustable MAX & MIN multiplier item for certain retail INTEL CPUs.
2. Updated CPU micro code.
3. Supports certain SATA CDROMs when "OnChip Serial ATA" is running in "Enhanced Mode".
4. Changed "CPU Alarm temperature" default to 85°C.
5. BIOS compile date: 11/03/2004

1. Updated CPU micro code.
2. BIOS compile date: 08/17/2004

1. Updated CPU Micro Code.
2. Shows MAC Address of onboard LAN chip in System Configuration section if "Onboard Network Controller" is disabled.
3. Added AWDFLASH v8.32 support for the "ALT+F2" hot key function.
4. Enhanced compatibility with certain power supplies.
5. Fixed an issue where the "OnChip SATA Raid Rom" item could not be disabled.
6. BIOS compile date: 04/09/2004

1. Please use the AWDFLASH v8.24F flash utility to update the AI7 BIOS.
2. Fixed a problem where the system cannot boot into Windows if
   1. The OS is installed on the SATA hard disk when both SATA and PATA hard disks are present.
   2. The PATA hard disk is removed after the OS installation.
3. Added "CPU FAN Failed Warning" item.
4. Updated Prescott CPU micro code.
5. Updated Intel OSB logo.
6. Changed the default year to 2004.
7. Added "Full Screen LOGO Show" and replaced "Intel OnScreen Branding" item.
8. Updated INTEL RAID BIOS to version 3.5.0.3003.
9. BIOS compile date: 02/25/2004.

1. Please use flash utility AWDFLASH v8.24F to update AI7 BIOS.
2. Added Pentium 4 Extreme Edition support.
3. Disabled Winbond W83627HF sensor unit to prevent incorrect CPU voltage information shown in some third party software.
4. Fixed the problem where the BIOS will show the string "AGP/PCI Frequency is 66/33MHz" twice after warm boot.
5. Fixed the problem where certain CD/DVD-ROM could not be correctly detected when there is a HDD drive attached on the same IDE cable.
6. Fixed the problem where system will reboot when the "Resume by Alarm" is enabled and the user pressed the power button to shutdown the system during POST.
7. Fixed the problem where IDE devices cannot be detected correctly if TAB and DEL is pressed at the same time when entering the BIOS setup.
8. Fixed the problem where HDD size is detected as 136GB when 200/250/300 GB SATA drives are connected to SATA1 or SATA2 (ICH5 SATA channels).
9. Enhance system performance.
10. BIOS compile date: 11/10/2003.

1. Please use flash utility AWDFLASH v8.24F to update AI7 BIOS.
2. Fixed the problem "CPU Fan Fail Shutdown" fails to function.
3. Fixed the problem "Restore On AC Power Loss" fails to function.
4. Revise the "NB FanEQ Control" temperature range to 25~50℃.
5. BIOS compile date: 10/15/2003.

1. Please use flash utility AWDFLASH v8.24F to update AI7 BIOS.
2. Fixed the system hangs at post code 52h when using Media XP and Iomega USB ZIP 250.
3. Fixed some string will not be shown on the POST screen when pressed TAB key to enter POST screen.
4. Synchronize the external clock and voltage with OC Guru.
5. Synchronize the options related to temperature monitoring and FanEQ with μGuru .
6. Add CPU throttling function.
7. BIOS compile date: 10/07/2003.

1. Bitte nutzen Sie flash Utility AWDFLASH v8.24F um das AI7 BIOS zu aktualisieren.
2. Erste Ausgabe.
3. BIOS Herstellungsdatum: 09/23/2003

1. The POST screen now show correctly when ATI X1300 VGA card installed.
2. BIOS compiled date: 12/14/2005

1. Support Presler CPU.
2. ABIT EQ now works as intended after resuming from S3 mode.
3. BIOS compiled date: 11/30/2005

1. Memory frequency will be shown correctly when N/B Strap CPU as is set to "By CPU"
2. Fixed the issue that the system may not be able to boot up from SiliconImage RAID controller when Intel RAID BIOS is enabled.
3. The function "S/PDIF in" will be work correctly now.
4. Update CPU micro code.
5. BIOS compiled date: 08/23/2005

1. Fixed the issue that BIOS will only show one processor when a dual core CPU is installed.
2. tRAS will be shown correctly now.
3. EIST now works as intended.
4. BIOS compiled date: 07/19/2005

1. Fixed the issue that with certain VGA card does not work with four 1GB RAM modules.
2. Intel OSB now shows correctly according to the CPU used.
3. PS2 mouse now works with USB keyboard.
4. Pentium D 840 will be detected correctly.
5. BIOS compiled date: 07/06/2005

1. PCI-Express clock now shows correctly in OC Guru.
2. Synchronize BIOS OC preset table with OC Guru.
3. BIOS compiled date: 05/24/2005

1. First release.
2. BIOS compiled date: 05/12/2005

1. The POST screen now show correctly when ATI X1300 VGA card installed.
2. BIOS compiled date: 12/14/2005

1. Support Presler CPU.
2. ABIT EQ now works as intended after resuming from S3 mode.
3. BIOS compiled date: 11/30/2005

1. Memory frequency will be shown correctly when N/B Strap CPU as is set to "By CPU"
2. Fixed the issue that the system may not be able to boot up from SiliconImage RAID controller when Intel RAID BIOS is enabled.
3. The function "S/PDIF in" will be work correctly now.
4. Update CPU micro code.
5. BIOS compiled date: 08/23/2005

1. Fixed the issue that BIOS will only show one processor when a dual core CPU is installed.
2. tRAS will be shown correctly now.
3. EIST now works as intended.
4. BIOS compiled date: 07/19/2005

1. Fixed the issue that with certain VGA card does not work with four 1GB RAM modules.
2. Intel OSB now shows correctly according to the CPU used.
3. PS2 mouse now works with USB keyboard.
4. Pentium D 840 will be detected correctly.
5. BIOS compiled date: 07/06/2005

1. First Release.
2. BIOS compiled date: 05/24/2005

1. Add AMD XP OEM processor 2800+ support.
2. Enhance CPU compatibility with Sempron 2200+.
3. BIOS compiled date: 06/13/2005

1. Added new CPU support.
2. Enhanced memory compatibility.
3. Calibrated CPU frequency.
4. BIOS compile date: 11/23/2004

1. AMD Sempron CPU support.
2. BIOS compile date: 08/06/2004

1. Added "Wake Up By OnChip LAN" item.
2. Fixed a problem where the system cannot boot into Windows if
   1. The OS is installed in the SATA hard disk when both the SATA and PATA hard disks are present.
   2. The PATA hard disk is removed after the OS installation.
3. Corrected "Restore on AC Power Loss" item.
4. Fixed OS shutdown function failure if "USB Mouse Support via BIOS" is enabled.
5. BIOS compile date: 07/30/2004

1. Please use the AWDFLASH v8.24F flash utility to update the AN7 BIOS.
2. Added Auto-Shutdown function when CCMOS jumper is set to pins 2-3. The correct CCMOS jumper should be on pins 1-2; in case it is placed on 2-3, the CPU core voltage will be abnormally high, an the system will shut down automatically to protect the CPU from damage.
3. Fixed an issue where USB-ZIP will be detected as a harddisk.
4. Updated SI3112 SATA BIOS to v4.2.47.
5. Revised the characters in "Wakeup by Alarm".
6. Enhanced USB 2.0 device compatibility, "Integrated Peripherals / OnChip PCI Device / USB 2.0 Device Compatible / Disabled -> Enabled".
7. Fixed an issue where SCSI boot ID cannot be selected when certain SCSI cards are installed.
8. Fixed an issue where SATA HDD boot up will fail if a PS/2 mouse is not installed.
9. Fixed an issue where the system will show 119 degrees under certain circumstances.
10. BIOS compile date: 03/04/2004.

1. Please use the AWDFLASH v8.24F flash utility to update the AN7 BIOS.
2. Changed default RTC year to 2004.
3. Updated Silicon Image 3112 controller ROM to version 4.2.43.
4. Added CPU fan fail warning option.
5. Added AGP frequency on the fly option.
6. Saved CPU default ratio to µGuru.
7. Added SATA ROM control option.
8. Fixed mouse power on fails to function when using certain mice.
9. Enhanced compatibility with WD400AB hard disk.
10. Synchronized FanEQ temperature settings with OC Guru.
11. Reduced the time it takes to resume from STR state when using Windows 98 and Windows ME.
12. Added "Full screen logo show" option.
13. BIOS compile date: 01/06/2004

1. Please use the AWDFLASH v8.24F flash utility to update the AN7 BIOS.
2. Fixed the problem where after pressing "F8" for OC on the fly and then pressing ESC, the image on screen will become distorted.
3. Fixed the wake on ring fail problem.
4. Fixed the problem where a SATA hard disk will not respond after resuming from S3 mode.
5. Updated DRAM DMI information and revised the wording of memory status from "DDR SDRAM at Bank" to "DDR at DIMM" in the system configuration table.
6. Fixed the problem where the DRAM timing is not changed after saving and exiting the BIOS.
7. Enhanced SATA device stability.
8. Added resume from S3/S4 mode using USB devices.
9. Fixed the problem where the system cannot boot into Windows if
   1. The OS is installed in the SATA hard disk when both the SATA and PATA hard disks are present
   2. The PATA hard disk is removed after the OS installation.
10. BIOS compile date: 11/13/2003
    

1. Please use flash utility AWDFLASH v8.24F to update AN7 BIOS.
2. First release.
3. BIOS compile date: 11/11/2003

1. Support FX-60
2. Enhanced compatibility with certain USB devices
3. Enhanced compatibility with certain memories.
4. BIOS compiled date: 1/19/2006
   

1. Enhanced compatibility with certain PCI SCSI cards.
2. Add new CPU support.
3. BIOS compiled date: 11/17/2005

1. Enhanced some VGA cards compatibility.
2. Update nVIDIA RAID BIOS to V4.8
3. Enhanced DRAM compatibility.
4. Enhanced some sound cards compatibility.
5. BIOS compiled date: 09/27/2005

1. Recalibrate CPU temperature.2
2. BIOS compiled date: 07/21/2005

1. Change default setting of Cool n' Quiet to "Enable"
2. Change Full screen logo.
3. Cool n' Quiet now works as intended.
4. Fixed the issue that certain VGA card does not work with DVI output.
5. Fixed the issue that some 3D application may not run stable in SLi mode.
6. Change some item in DRAM voltage section.
7. Update AMD MCT2
8. BIOS compiled date: 07/12/2005

1. Update MCT2
2. Support dualcore cpu
3. Modified DMI Pool
4. Add ACPI CPU1 data
5. Delete "an emergy star"

1. Add AMD Rev. E CPU support.
2. Add "Wake-up by Onchip LAN" function.
3. Add LDT frequency item "x1.5" and "x2.5".
4. Add some new USB related items.
5. BIOS compiled date: 04/25/2005

1. Update RAID ROM to v4.81.
2. The CPU Multiplier function now works as intended.
3. Fix the issue that BIOS may hang at ABIT EQ voltage monitoring section if DDR voltage is set to 2.80V.
4. BIOS compiled date: 02/17/2005

1. First release.
2. BIOS compiled date: 02/01/2005

1. Externer Takt kann nun auch höher als 277MHz. gesetzt werden.
2. Die CPU-Frequenz wird nun auch über 256MHz korrekt angezeigt.
3. BIOS Erstellungsdatum: 03/22/2006

1. First release.
2. BIOS compiled date: 11/29/2005

1. Support FX-60
2. Enhanced compatibility with certain USB devices
3. Enhanced compatibility with certain memories.
4. BIOS compiled date: 1/19/2006
   

1. Enhanced compatibility with certain PCI SCSI cards.
2. Add new CPU support.
3. BIOS compiled date: 11/17/2005

1. Enhanced some VGA cards compatibility.
2. Update nVIDIA RAID BIOS to V4.8
3. Enhanced DRAM compatibility.
4. BIOS compiled date: 09/27/2005

1. Recalibrate CPU temperature.2
2. BIOS compiled date: 07/21/2005

1. Change default setting of Cool n' Quiet to "Enable"
2. Change Full screen logo.
3. Cool n' Quiet now works as intended.
4. Fixed the issue that certain VGA card does not work with DVI output.
5. Fixed the issue that some 3D application may not run stable in SLi mode.
6. Change some item in DRAM voltage section.
7. Update AMD MCT2
8. BIOS compiled date: 07/12/2005

1. Update MCT2
2. Support dualcore cpu
3. Modified DMI Pool
4. Add ACPI CPU1 data
5. Delete "an emergy star"

1. Support FX-60
2. Enhanced compatibility with certain USB devices
3. Enhanced compatibility with certain memories.
4. BIOS compiled date: 1/19/2006
   

1. Enhanced compatibility with certain PCI SCSI cards.
2. Add new CPU support.
3. BIOS compiled date: 11/17/2005

1. Enhanced some VGA cards compatibility.
2. Update nVIDIA RAID BIOS to V4.8
3. Enhanced DRAM compatibility.
4. Enhanced some sound cards compatibility.
5. BIOS compiled date: 09/27/2005

1. Recalibrate CPU temperature.2
2. BIOS compiled date: 07/21/2005

1. Change default setting of Cool n' Quiet to "Enable"
2. Change Full screen logo.
3. Cool n' Quiet now works as intended.
4. Fixed the issue that certain VGA card does not work with DVI output.
5. Fixed the issue that some 3D application may not run stable in SLi mode.
6. Change some item in DRAM voltage section.
7. Update AMD MCT2
8. BIOS compiled date: 07/12/2005

1. Update MCT2
2. Support dualcore cpu
3. Modified DMI Pool
4. Add ACPI CPU1 data
5. Delete "an emergy star"

1. First release.
2. BIOS compiled date: 04/25/2005

1. Support FX-60
2. Enhanced compatibility with certain USB devices
3. Enhanced compatibility with certain memories.
4. BIOS compiled date: 1/19/2006
   

1. Enhanced compatibility with certain PCI SCSI cards.
2. Add new CPU support.
3. BIOS compiled date: 11/17/2005

1. Enhanced some VGA cards compatibility.
2. Update nVIDIA RAID BIOS to V4.8
3. Enhanced DRAM compatibility.
4. Enhanced some sound cards compatibility.
5. BIOS compiled date: 09/27/2005

1. Recalibrate CPU temperature.2
2. BIOS compiled date: 07/21/2005

1. Change default setting of Cool n' Quiet to "Enable"
2. Change Full screen logo.
3. Cool n' Quiet now works as intended.
4. Fixed the issue that certain VGA card does not work with DVI output.
5. Fixed the issue that some 3D application may not run stable in SLi mode.
6. Change some item in DRAM voltage section.
7. Update AMD MCT2
8. BIOS compiled date: 07/12/2005

1. Support FX-60
2. Enhanced compatibility with certain USB devices
3. Enhanced compatibility with certain memories.
4. BIOS compiled date: 1/19/2006
   

1. Enhanced compatibility with certain PCI SCSI cards.
2. Add new CPU support.
3. BIOS compiled date: 11/17/2005

1. Enhanced some VGA cards compatibility.
2. Update nVIDIA RAID BIOS to V4.8
3. Enhanced DRAM compatibility.
4. Enhanced some sound cards compatibility.
5. BIOS compiled date: 09/27/2005

1. Recalibrate CPU temperature.2
2. BIOS compiled date: 07/21/2005

1. Change default setting of Cool n' Quiet to "Enable"
2. Change Full screen logo.
3. Cool n' Quiet now works as intended.
4. Fixed the issue that certain VGA card does not work with DVI output.
5. Fixed the issue that some 3D application may not run stable in SLi mode.
6. Change some item in DRAM voltage section.
7. Update AMD MCT2
8. BIOS compiled date: 07/12/2005

1. Update MCT2
2. Support dualcore cpu
3. Modified DMI Pool
4. Add ACPI CPU1 data
5. Delete "an emergy star"

1. First release.
2. BIOS compiled date: 05/20/2005

1. Recalibrate CPU temperature.
2. BIOS compiled date: 07/22/2005

1. Changed default RTC year to 2005.
2. Added EIST support.
3. Updated CPU micro code.
4. BIOS compiled date: 01/21/2005

1. Added adjustable MAX & MIN multiplier item for certain retail Intel CPUs.
2. Updated CPU micro code.
3. Changed the default setting of "ACPI Suspend Type" to "S3".
4. Changed the default setting of "Resume by USB from S3" to "Enable".
5. Enhanced compatibility with certain SATA DVD-ROMs.
6. BIOS compile date: 10/12/2004

1. Updated CPU micro code.
2. Added CPU FEATURE item.
3. BIOS compile date: 08/18/2004

1. Removed “OC On The Fly” item from ABIT EQ
2. Fixed an issue where the system temperature would be wrong if ABIT EQ Beep Control was disabled.
3. Revised help information in Multiplier factor about not supporting “OC On The Fly”.
4. Added P4 Extreme Edition & Celeron-D logo.
5. Supports µGuru Clock.
6. Updated CPU micro code.
7. Added PWM Temperature maximum to 130 degree C.
8. Revised DMI information.
9. BIOS compile date: 06/28/2004

1. Bitte nutzen Sie das Flashprogramm AWDFLASH v8.32 um das AS8 BIOS zu aktualisieren.
2. Erste Version.
3. BIOS Erscheinungsdatum: 28/04/2004

1. Recalibrate CPU temperature.
2. BIOS compiled date: 07/22/2005

1. Changed default RTC year to 2005.
2. Added EIST support.
3. Updated CPU micro code.
4. BIOS compiled date: 01/21/2005

1. Added adjustable MAX & MIN multiplier item for certain retail Intel CPUs.
2. Updated CPU micro code.
3. Changed the default setting of "ACPI Suspend Type" to "S3".
4. Changed the default setting of "Resume by USB from S3" to "Enable".
5. Enhanced compatibility with certain SATA DVD-ROMs.
6. BIOS compile date: 10/12/2004

1. Updated CPU micro code.
2. Added CPU FEATURE item.
3. BIOS compile date: 08/18/2004

1. Recalibrate CPU temperature.
2. BIOS compiled date: 07/22/2005

1. Changed default RTC year to 2005.
2. Added EIST support.
3. Updated CPU micro code.
4. BIOS compiled date: 01/21/2005

1. Added adjustable MAX & MIN multiplier item for certain retail Intel CPUs.
2. Updated CPU micro code.
3. Changed the default setting of "ACPI Suspend Type" to "S3".
4. Changed the default setting of "Resume by USB from S3" to "Enable".
5. Enhanced compatibility with certain SATA DVD-ROMs.
6. BIOS compile date: 10/12/2004

1. Updated CPU micro code.
2. Added CPU FEATURE item.
3. BIOS compile date: 08/18/2004

1. Change the default year after clear CMOS to 2003.
2. Add AMD Duron 1400(133)/1600(133)/1800(133) support.
3. Change the wording "DDR SDRAM at DIMM" to "DDR at DIMM" in order to match the wording on the PCB.
4. BIOS compile date: 08/29/2003.
   

1. Updatet das HPT 374 BIOS von Version 1.1 auf 1.22, um Bootsequenz-Probleme zu lösen.
   • Geichzeitiger Gebrauch von PS/2 Tastatur und Maus.
   • Festplatte an IDE 3 oder 4 angeschlossen.
   • CDROM an IDE2 angeschlossen.
   • Wenn die obrigen drei Punkte zutreffen kann es beim Booten unter Win 98SE dazu kommen, dass das Floppylaufwerk fehlerhaft arbeitet.
2. Korrigiert Systempause bei C3 nachdem das CMOS zurückgesetzt wurde, bei verwendung eines Sumsung DDR K4H560838D Moduls.
3. BIOS erstellt am: 10/11/2002.

1. Unterstützt Athlon XP 2400+, 2600+ CPU. ACHTUNG: Athlon XP 2400+ und 2600+ CPU benötigen unbedingt AMD-zertifizierte Kühleinheiten; ansonsten kann es zu Systeminstabilitäten und sogar Boot-Problemen kommen. Sie können hierfür die offizielle AMD-Empfehlungsliste zu Rate ziehen. http://www.amd.com/gb-uk/Processors/ComputingSolutions/0,,30_288_1274_3734^4348^4356,00.html
2. HPT 374 BIOS Version 1.21.
3. BIOS erstellt am: 8/22/2002.

1. Unterstützt neuen 0.13 micron AthlonXP CPU-Throughbred.
2. HPT 374 BIOS Version 1.21.
3. BIOS erstellt am: 6/05/2002.

1. Jetzt mit "Onboard Lan Boot ROM" Option. Die Voreinstellung ist "Disabled", um den Bootvorgang zu beschleunigen.
2. HPT 374 BIOS Version 1.21.
3. BIOS Datum: 04/09/2002.　

1. Original BIOS.
2. HPT 374 BIOS Version 1.21.
3. BIOS Datum: 04/03/2002.

1. Add AMD Duron 1400(133)/1600(133)/1800(133) support.
2. Fix the issue that the system occasionally hangs at post code 26 if the system is using 133/166 FSB CPU and the power was turned off during boot up procedure when the post code is AE.
3. HPT 374 BIOS version 1.23.
4. BIOS compile date: 08/28/2003.

1. Follow AMD's recommendation that" CPU Disconnect Function "should be implemented to make CPU slow down in idle state, and the default value sets up to Enable.
2. Follow AMD's recommendation to revise the trigger timing of LM90 for Palomino CPU(model 6).
3. Support Barton 2600+(333 FSB) and Thorton2000+(266 FSB)/2200+(266 FSB)/2400+(266 FSB)/2600+(333 FSB).
4. Revises some CPU frequency(1466,1666,1916,2166)to be AMD officially suggested figures.(1467,1667,1917,2167).
5. HPT 374 BIOS version 1.23.
6. BIOS erstellt am: 03/27/2003.

BIOS ID: DC

1. Ändert die voreingestelte Jahreszeit auf 2003.
2. Korrigiert Boot-Probleme des Athlon XP 1400(100) Prozessore by bestimmten Operationen:
   a. Discharge CMOS Daten.
   b. Aufrufen der BIOS Setup Seite.
   c. Save& Exit ohne, dass Änderungen vorgenommen wurden.
3. Korrigiert das Auslesen der CPU Working Frequency für 166MHz CPU.
4. HPT374 BIOS Version 1.22.
5. BIOS erstellt am: 01/08/2003.

1. Provide CPU settings for AMD Athlon XP 2500+/2600+/2800+/3000+(333).

2. Fix LAN transfer error in 96 hours continuous LAN test while CPU/DRAM = 100/133 and 100/166.

3. Revise the CPU and UUID information in DMI pool, and also fill in the SVID/SSID of IDE controller.

4. Fix the issue that Windows 98SE shows corrupt screen with ATI Radeon 9700 pro.

5. Add "Enhance PCI Performance" function to improve PCI RAID performance.

6. Fix "Shutdown When CPU overheat" and "Shutdown When CPU FAN Fail" function failure under Windows 2000.

7. Change ACPI Code to pass HCT ACPI test.

8. HPT374 BIOS version 1.22.

9. BIOS Compile Date: 12/03/2002.

1. Unterstützt Athlon XP 2400+, 2600+ CPU. ACHTUNG: Athlon XP 2400+ und 2600+ CPU benötigen unbedingt AMD-zertifizierte Kühleinheiten; ansonsten kann es zu Systeminstabilitäten und sogar Boot-Problemen kommen. Sie können hierfür die offizielle AMD-Empfehlungsliste zu Rate ziehen. http://www.amd.com/gb-uk/Processors/ComputingSolutions/0,,30_288_1274_3734^4348^4356,00.html
2. Bietet CPU-Multiplikatoren bis 32X ii SoftMenu.
3. Verbessert DDR333 Stabilität wenn die BIOS-Option "Enhance DRAM Performance" auf "enabled" gestellt ist.
4. Korrigiert LAN-Transfer-Fehler im Dauerbetrieb länger als 72 Stunden kontinuierlichen Betriebs während LAN Test für CPU/DRAM = 100/133 und 100/166 laufen.
5. Unterstützt neue 333 AMD CPU.
6.  Übertakten Sie die CPU-Frequenz mehr als 180MHz, drücken Sie nicht den Reset-Schalter, da ansonsten das System nicht mehr hochbooten wird. Es handelt sich hierbei um eine Sicherheitsfunktion, um mögliche Hardwareschäden unter abnormalen Arbeitsumständen zu verhindern.
7. HPT 374 BIOS Version 1.21.
8. BIOS erstellt am: 9/9/2002.

1. First release.
2. HPT 374 BIOS Version 1.21.
3. BIOS compile date: 8/12/2002.

1. Unterstützt Athlon XP 2400+, 2600+ CPU. ACHTUNG: Athlon XP 2400+ und 2600+ CPU benötigen unbedingt AMD-zertifizierte Kühleinheiten; ansonsten kann es zu Systeminstabilitäten und sogar Boot-Problemen kommen. Sie können hierfür die offizielle AMD-Empfehlungsliste zu Rate ziehen. http://www.amd.com/gb-uk/Processors/ComputingSolutions/0,,30_288_1274_3734^4348^4356,00.html
2. Bietet CPU-Multiplikatoren bis 32X ii SoftMenu.
3. Verbessert DDR333 Stabilität wenn die BIOS-Option "Enhance DRAM Performance" auf "enabled" gestellt ist.
4. Korrigiert LAN-Transfer-Fehler im Dauerbetrieb länger als 72 Stunden kontinuierlichen Betriebs während LAN Test für CPU/DRAM = 100/133 und 100/166 laufen.
5. Unterstützt neue 333 AMD CPU.
6.  Übertakten Sie die CPU-Frequenz mehr als 180MHz, drücken Sie nicht den Reset-Schalter, da ansonsten das System nicht mehr hochbooten wird. Es handelt sich hierbei um eine Sicherheitsfunktion, um mögliche Hardwareschäden unter abnormalen Arbeitsumständen zu verhindern.
7. HPT 374 BIOS Version 1.21.
8. BIOS erstellt am: 9/9/2002.

1. First release.
2. HPT 374 BIOS Version 1.21.
3. BIOS compile date: 8/12/2002.

1. Support DRAM ECC Function..
2. Modify system state error after AC power lose
3. Modify some USB boot and sting fail
4. Modify CAS Latency timing issue
5. Modify auto boot up when inserted USB device.
6. BIOS compiled date: 3/10/2006

1. First release.
2. BIOS compiled date: 12/16/2005

1. Verbessert die Übertaktbarkeit.
2. Unterstützt neuen LPC Flash, SST-49LF040B
3. BIOS erstellt am: 04/25/2006

1. First release.
2. BIOS compiled date: 03/20/2006
   

1. Fixed the issue that the system may not be able to boot when installed the processor of Rev. E
2. Enhanced compatibility with certain PCI RAID cards.
3. Support FX60.
4. BIOS compiled date: 02/23/2006

1. Enhanced compatibility with certain VGA cards.
2. Enhanced compatibility with certain PCI SCSI cards.
3. Add new CPU support.
4. BIOS compiled date: 11/08/2005

1. Fixed the issue that with certain VGA card does not work with four 1GB RAM modules.
2. DRAM Command Rate, Row Refresh Cycle Time, Read to Write Delay now work as intended.
3. Recalibrate CPU temperature.
4. System now can resume from S3 without problem.
5. BIOS compiled date: 07/28/2005

1. Cool n' Quiet now works as intended.
2. Disable Cool n' Quiet function when the multiplier is manually changed in the BIOS.3
3. BIOS compiled date: 07/04/2005

1. Update code base to 5/31 award code
2. Update MCT2
3. Support dualcore cpu
4. Fix "CMOS Checksum fail message" when select DRAM Timing value.
5. Delete "workstation" at POST
6. Full screen logo
7. Fixed "can not load SATA , LAN ROM issue"

1. Add AMD Rev. E CPU support.
2. Add new DRAM timing items.
3. BIOS compiled date: 04/20/2005

1. Add RocketBoy AV8 support.
2. Change the default RTC year to 2005.
3. Fixed minor DRAM timing issue.
4. BIOS compiled date: 01/19/2005

1. Updated µGuru Utility to uav8_019.bin.
2. Updated SATA ROM.
3. Added "Delay Transactions" item.
4. Added "PCI Latency Timer function" item.
5. Removed an error message that appears if the year is modified and a SAVE&EXIT is executed.
6. Fixed an issue where pressing TAB key to skip the OSB logo caused the Memory Information & Memory Clock to be missing.
7. Changed "USB 2.0 Controller" defaulted to "Enabled", and synchronized it with the "OnChip USB Controller" setting.
8. Synchronized "DDR Voltage" & "SB Voltage" in the PC Health item if modified.
9. Changed "Resume by OnChip USB" default to "Enabled".
10. Changed "ACPI Suspend Type" default to "S3".
11. Added DMI information.
12. Calibrated CPU temperature.
13. Added "Dual Channel Enabled 128bit" when in Dual Channel mode.
14. BIOS compile date: 11/12/2004

1. Enhanced compatibility with D0 stepping FX-55 and 3200+ CPUs.
2. BIOS compile date: 10/12/2004

1. Updated µGuru Utility to uAV8_017.BIN.
2. Updated CPU micro code.
3. Calibrated CPU temperature.
4. Calibrated "Delay IDE Initial" function timing.
5. Default ACPI Suspend Type changed to S3.
6. Fixed abnormal warning beep.
7. BIOS compile date: 09/17/2004

1. Updated uGuru Utility to uAV8_015.BIN.
2. Fixed non-adjustable "Shutdown Temp" & "Beep Temp" items in ABIT-EQ Temperature Monitoring.
3. Calibrated certain CPU frequency issues.
4. BIOS compile date: 09/03/2004

1. First Release.
2. BIOS compile date: 05/25/2004

1. Fixed the issue that the system may not be able to boot when installed the processor of Rev. E
2. Enhanced compatibility with certain PCI RAID cards.
3. Support FX60.
4. BIOS compiled date: 02/23/2006

1. Enhanced compatibility with certain VGA cards.
2. Enhanced compatibility with certain PCI SCSI cards.
3. Add new CPU support.
4. BIOS compiled date: 11/08/2005

1. Fixed the issue that with certain VGA card does not work with four 1GB RAM modules.
2. DRAM Command Rate, Row Refresh Cycle Time, Read to Write Delay now work as intended.
3. Recalibrate CPU temperature.
4. System now can resume from S3 without problem.
5. BIOS compiled date: 07/28/2005

1. Cool n' Quiet now works as intended.
2. Disable Cool n' Quiet function when the multiplier is manually changed in the BIOS.3
3. BIOS compiled date: 07/04/2005

1. Update code base to 5/31 award code
2. Update MCT2
3. Support dualcore cpu
4. Fix "CMOS Checksum fail message" when select DRAM Timing value.
5. Delete "workstation" at POST
6. Full screen logo
7. Fixed "can not load SATA , LAN ROM issue"

1. Add AMD Rev. E CPU support.
2. Add new DRAM timing items.
3. BIOS compiled date: 04/20/2005

1. Add RocketBoy AV8 support.
2. Change the default RTC year to 2005.
3. Fixed minor DRAM timing issue.
4. BIOS compiled date: 01/19/2005

1. Updated µGuru Utility to uav8_019.bin.
2. Updated SATA ROM.
3. Added "Delay Transactions" item.
4. Added "PCI Latency Timer function" item.
5. Removed an error message that appears if the year is modified and a SAVE&EXIT is executed.
6. Fixed an issue where pressing TAB key to skip the OSB logo caused the Memory Information & Memory Clock to be missing.
7. Changed "USB 2.0 Controller" defaulted to "Enabled", and synchronized it with the "OnChip USB Controller" setting.
8. Synchronized "DDR Voltage" & "SB Voltage" in the PC Health item if modified.
9. Changed "Resume by OnChip USB" default to "Enabled".
10. Changed "ACPI Suspend Type" default to "S3".
11. Added DMI information.
12. Calibrated CPU temperature.
13. Added "Dual Channel Enabled 128bit" when in Dual Channel mode.
14. BIOS compile date: 11/12/2004

1. Enhanced compatibility with D0 stepping FX-55 and 3200+ CPUs.
2. BIOS compile date: 10/12/2004

1. Updated µGuru Utility to uAV8_017.BIN.
2. Updated CPU micro code.
3. Calibrated CPU temperature.
4. Calibrated "Delay IDE Initial" function timing.
5. Default ACPI Suspend Type changed to S3.
6. Fixed abnormal warning beep.
7. BIOS compile date: 09/17/2004

1. Updated uGuru Utility to uAV8_015.BIN.
2. Fixed non-adjustable "Shutdown Temp" & "Beep Temp" items in ABIT-EQ Temperature Monitoring.
3. Calibrated certain CPU frequency issues.
4. BIOS compile date: 09/03/2004

1. First Release.
2. BIOS compile date: 05/25/2004

1. Enhanced compatibility with certain DDR2-667 memories.
2. Update CPU micro code.
3. The POST screen now show correctly when ATI X1300 VGA card installed.
4. BIOS compiled date: 1/23/2006
   
   

1. Support Presler/ Cedar Mill CPU.
2. Support DDR2-800.
3. Support four 2GB memory.
4. Enhanced compatibility with certain PCI SCSI cards.
5. BIOS compiled date: 11/30/2005

1. System now can resume from S3 without problem.
2. Add new item "Disable unused PCI clock" enable/disable" function.
3. The function "On-Chip Audio Controller" now works as intended.
4. Update CPU micro code
5. BIOS compiled date: 10/04/2005

1. Fixed the issue that the system may not be able to boot up from SiliconImage RAID controller when Intel RAID BIOS is enabled.
2. Memory frequency will be shown correctly when N/B Strap CPU as is set to "By CPU"
3. Pentium Extreme edition CPU now works as intended when HT is set disabled.
4. Enhanced DRAM compatibility.
5. Add new item "On chip SATA RAID BIOS" enable/disable" function.
6. BIOS compiled date: 09/13/2005

1. Enhanced DRAM compatibility.
2. Pentium D 840 now shows correct core voltage and frequency in the BIOS.
3. The color of the phone jack in the driver now matches the back panel.
4. Update CPU micro code.
5. Fixed the issue that the frequencies of a dual core processor may be different when C1E and EIST is set disabled.
6. BIOS compiled date: 07/29/2005

1. Pentium D processors now can be correctly detected by the BIOS.
2. Add FSB 533MHz CPU support.
3. tRAS will be shown correctly now.
4. Fixed the issue that Windows can only recognize 2GB memory when there are 4GB installed.
5. Add new item "EIST Function".
6. BIOS compiled date: 07/12/2005

1. Enhanced compatibility with certain DDR2-667 memories.
2. Update CPU micro code.
3. The POST screen now show correctly when ATI X1300 VGA card installed.
4. BIOS compiled date: 1/23/2006
   
   

1. Support Presler/ Cedar Mill CPU.
2. Support DDR2-800.
3. Support four 2GB memory.
4. Enhanced compatibility with certain PCI SCSI cards.
5. BIOS compiled date: 11/30/2005

1. System now can resume from S3 without problem.
2. Add new item "Disable unused PCI clock" enable/disable" function.
3. The function "On-Chip Audio Controller" now works as intended.
4. Update CPU micro code
5. BIOS compiled date: 10/04/2005

1. Fixed the issue that the system may not be able to boot up from SiliconImage RAID controller when Intel RAID BIOS is enabled.
2. Memory frequency will be shown correctly when N/B Strap CPU as is set to "By CPU"
3. Pentium Extreme edition CPU now works as intended when HT is set disabled.
4. Enhanced DRAM compatibility.
5. Add new item "On chip SATA RAID BIOS" enable/disable" function.
6. BIOS compiled date: 09/13/2005

1. Enhanced DRAM compatibility.
2. Pentium D 840 now shows correct core voltage and frequency in the BIOS.
3. The color of the phone jack in the driver now matches the back panel.
4. Update CPU micro code.
5. Fixed the issue that the frequencies of a dual core processor may be different when C1E and EIST is set disabled.
6. BIOS compiled date: 07/29/2005

1. Pentium D processors now can be correctly detected by the BIOS.
2. Add FSB 533MHz CPU support.
3. tRAS will be shown correctly now.
4. Fixed the issue that Windows can only recognize 2GB memory when there are 4GB installed.
5. Add new item "EIST Function".
6. BIOS compiled date: 07/12/2005

1. First release.
2. BIOS compiled date: 05/24/2005

1. Enhanced compatibility with certain DDR2-667 memories.
2. Update CPU micro code.
3. The POST screen now show correctly when ATI X1300 VGA card installed.
4. BIOS compiled date: 1/23/2006
   
   

1. Verbesserte Kompatibilität mit bestimmten Festplaeen.
2. Verbesserte Kompatibilität mit bestimmten Speicherkarten.
3. Löst das Problem, dass der externe Takt nicht höher als 340MHz gesetzt warden kann.
4. BIOS Erstellungsdatum: 03/20/2006

1. First release.
2. BIOS compiled date: 1/17/2006

1. Verbesserte Kompatibilität mit bestimmten Festplaeen.
2. Verbesserte Kompatibilität mit bestimmten Speicherkarten.
3. Löst das Problem, dass der externe Takt nicht höher als 340MHz gesetzt warden kann.
4. BIOS Erstellungsdatum: 03/20/2006

1. First release.
2. BIOS compiled date: 1/17/2006

1. Updatet awdflash.exe (Award BIOS Flash Utility) Version auf v8.22A.

1. Verbesserte Kompatibilität mit bestimmten Speicherkarten.
2. Die "Temperature Monitor" Anpassungsfunktion funktioniert nun wie vorgesehen.
3. Der POST Bildschirm zeigt nun korrekt an, wenn eine ATI X1300 Grafikkarte installiert ist.
4. BIOS Erstellungsdatum date: 01/09/2006

1. Change full screen logo.
2. BIOS compiled date: 07/28/2005

1. Add AMD Rev. E CPU support.
2. Update VIA SATA RAID BIOS to V1.20
3. USB mouse now works under DOS.
4. BIOS compiled date: 04/20/2005

1. First release.
2. BIOS compiled date: 02/14/2005

1. Verbesserte Kompatibilität mit bestimmten Speicherkarten.
2. Der POST Bildschirm zeigt nun korrekt eine installierte ATI X1300 Grafikkarte an.
3. BIOS Erstellungsdatum: 03/30/2006

1. First release.
2. BIOS compiled date: 07/28/2005

1. Original BIOS.

2. BIOS  Datum: 4/24/2002

1. Updated CPU micro code.
2. Added new options 80C/85C/90C in "CPU Shutdown Temperature".
3. Changed the default setting of "CPU Warning Temperature" to 85C.
4. BIOS compile date: 07/15/2003.

1. Fixes issue where the Load Fail-Safe/Optimized Default, the setting of Drive A/Drive B/Floppy 3 Mode/Video/Halt On in Standard CMOS Features, would not return to defaults.
2. Fixes issue where the "Shutdown When CPU FAN Fail" option fails after about 16 minutes idling under Windows 2000/XP.
3. Fixes the incompatibility issue where the ATI Radeon 9700Pro fails to boot up with a certain power supply unit- TC-350P. With this power supply, 9700Pro will fail to boot, and the reset button needs to be pressed once to show the bootup screen.
4. HPT 372 BIOS Version 2.32. The RAID function is for BD7-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled when the RAID controller chip is not detected.
5. BIOS Compile Date: 11/12/2002

1. Willamette CPU wird automatisch mit den korrekten FSB-Einstellungen im SoftMenu BIOS unter "Load Fail-Safe/Optimized Default" erkannt.
2. Ergänzt neuen CPU Mikrocode (0F27).
3. Im SoftMenu werden Multiplikatoren bis 32x bereitgestellt.
4. Korrigiert die Problematik, dass einige CL=3 DDR400 Speichermodulge nicht booten können. (DDR333 und DDR400 Module können auf Grund der i845 Chipsatz-Spezifikationen nur mit DDR 266-Geschwindigkeit betrieben werden.)
5. Korrigiert Fehlfunktion der "CPU Shutdown Temperature" Option unter Windows 2000.
6. HPT 372 BIOS Version 2.32. Die RAID Funktion bezieht sich nur auf das BD7-RAID. Das HPT BIOS wird dabei automatisch abgeschaltet, sobald kein RAID Controller Chip detektiert werden kann.
7. BIOS erstellt am: 9/11/2002.

1. Northwood CPU detektiert automatisch seinen FSB während die Load Fail-Safe/Optimized Voreinstellungen im BIOS -Setup der SoftMenu geladen werden.
2. Unterscheidet USB 1.1 Controller vom USB 2.0 Controller im PCI Geräteliste-Bildschirm.
3. Modifiziert die DMI -Daten um die Verwendung von online Diagnose-Tools zu optimieren(PCI Pitstop).
4. HPT 37x BIOS Version 2.31. Die RAID Funktion bezieht sich nur auf das BD7-RAID. Dieses BIOS ist auch für die non-RAID Version geeignet. Das HPT BIOS wird automatisch abgeschaltet, wenn kein RAID Controller Chip gefunden wird.
5. BIOS erstellt am: 7/02/2002.

1. Erhöht die CPU Core Voltage für 0.13 micron Pentium 4 Prozessoren (Northwood).
2. Unterstützt Pentium 4 2.4G CPU.
3. Korregiert mögliches no POST mit dem Debug-Code 26 wenn im SoftMenu III die Option "Fixed AGP=66" eingestellt ist.
4. Unterstützt P entium 4 Celeron CPU.
5. HPT 37x BIOS V ersion 2.31. Die RAID Funktion bezieht sich nur auf das BD7-RAID. Dieses BIOS ist auch für die non-RAID Version geeignet. Das HPT BIOS wird automatisch abgeschaltet, wenn kein RAID Controller Chip gefunden wird.
6. BIOS erstellt am: 5/02/2002.

!!! ACHTUNG beim BIOS-Update !!!
* Wenn Sie Ihr älteres BIOS auf eine neuere BIOS Version, die das HPT 2.31 BIOS beinhaltet, updaten, erstelle Sie auf jeden Fall ein Backup auf einem unabhängigen Speichermedium. Es kann in Einzelfällen vorkommen, dass das neue HPT 2.31 BIOS die mit einem älteren HPT BIOS erstellte RAID Konfiguration korrumpiert.. Das heißte, dass es nötig sein kann, die RAID Konfiguration erneut zu erstellen. Sollte das der Fall sein, werden sämtliche Daten einer RAID-0 Konfiguration verloren! 
* RAID-1 Anwender sollten "CTRL+H" drücken, um in das hpt37x Setup zu gelangen .
* Bitte rüsten Sie zunächst den HPT 2.31 TREIBER auf, bevor Sie das BIOS upgraden.

1. "High Performance" Option in "Load Optimized Defaults" hinzugefügt.
2. "High Performance" Option verwendet aggressivere DDR Speicher-Timing-Einstellungen, um bessere Systemleistung zu erhalten. Dazu kann es allerdings in einigen Fällen zu Systeminstabliitäten kommen.
3. HPT 37x BIOS version 2.0.1024.Diese RAID-Funktion ist nur für das BD7-RAID. Dieses BIOS ist auch für die non-RAID Version gedacht, das HPT-BIOS wird automatisch ausgeschaltet, sobald der RAID Controller Chip nicht detektiert werden kann.

1. Original-BIOS
2. HPT 37x BIOS version 2.0.1024.Diese RAID-Funktion ist nur für das BD7-RAID. Dieses BIOS ist auch für die non-RAID Version gedacht, das HPT-BIOS wird automatisch ausgeschaltet, sobald der RAID Controller Chip nicht detektiert werden kann.