[ BP6 ]

Do ABIT WX6 and BP6 boards support Intel PIII FC PGA Coppermine CPUs?

No. The WX6 and BP6 don't support Intel Intel PIII FC PGA Coppermine CPUs due to the native circuit scheme.

Does the BP6 support the Power Recovery function after power failure?

Yes, the BP6 board does support it as of the latest BIOS update. After updating to the latest BIOS for the BP6, please go into the CMOS SETUP to adjust the PWRON After PWR-Fail option as "On" in the INTEGRATED PERIPHERALS section. Aside from the setting in the CMOS, you also have to put the JP1 jumper to 1-2. ( the default setting is 2-3).

Installing the Ultra ATA/66 Driver for NT4.0 from CD-ROM.

Click here.

Why does the BIOS detect the ATA 66 hard drive as an Ultra ATA/33 on the ATA 66 port rather than an Ultra ATA/66 even though you have put an ATA 66 hard drive into the ATA 66 port?

If you have this situation, we suggest you put the hard drive on the traditional IDE port and have the utility from the hard drive manufacturer to adjust the hard drive to ATA 66 mode. It will be detected normally next time when you put it on the ATA 66 port.

Why I can only adjust the voltage to a 2.3 Vcore in CPU SoftMenu?

In order to protect your CPU, the voltage adjustment range will depend on which CPU you have. For example, The maximum adjustment range of PII CPUs with 66Mhz FSB must be 3.2V and the maximum adjustment range of Celeron/ PII and PIII CPUs with 100Mhz FSB must be 2.3V . We don't recommend our customers to adjust the default voltage.