1. Load proper setting automatically for Willamette CPU when Load Fail -safe/Optimized Default in BIOS.
2. Support Celeron 2.0G CPU (for BL7/BL7-RAID only).
3. Support PMC Pm49FL004T 4Mb Flash ROM.
4. Fill in new CPU micro code (0F27).
5. HPT 37x BIOS version 2.0.1024. The RAID function is for BL7-RAID and BW7-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
6. BIOS compile date: 9/16/2002.

1. Modify the DMI data to fix on line diagnostic tool issue (PC Pitstop).
2. HPT 37x BIOS version 2.0.1024. The reason to change BIOS v2.31 to v2.0.1024 are as below:

• System can not resume from STR mode under Win XP, while HDD connected onto HighPoint IDE Port by using HPT v2.31 BIOS.
• Improve performance declined on HPT BIOS v2.31 issue.

3. BIOS compile date: 7/02/2002.

1. Support Pentium 4 2.4G CPU.
2. Fix occasional no POST with debug code 26 issue while "Fixed PCI=33" option was enabled in Softmenu III.
3. Support P4 Celeron CPU.
4. HPT 37x BIOS version 2.31. The RAID function is for BD7-RAID and BW7-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
5. BIOS compile date: 5/14/2002.

!!!Attention for upgrading BIOS!!!
* When you upgrade bios to new bios included HPT 2.31 bios, we highly recommend you backup your system and data to an independent storage device first. New HPT 2.31 bios may corrupt original RAID configuration created on old bios occasionally. That means you may need to rebuild RAID configuration. If it happens, all the data on RAID-0 will be gone!
* For RAID-1 user, please press "CTRL+H" to enter hpt37x setup.
*Please upgrade HPT 2.31 driver before upgrade bios.

1. The Default of year setup to 2002.
2. Raise the adjustable CPU Core Voltage for Pentium 4 processor.
3. Fix ACPI error in system event viewer after resume from STR mode.
4. HPT BIOS Version 2.0.1024.
5. BIOS Compile Date: 3/14/2002.

BIOSID: 5K

1. Fix the CD-ROM boot issue on the SCSI cards.
2. Fix the unbootable issue when installing a hard disk onto IDE-2 and set the boot sequence by following as HDD_1, HDD_0 then floppy.
3. HPT BIOS version: 2.0.1024.

BIOSID: 5B

1. Fix some P4-423 1.5G and 1.7G CPU compatibility issue with BW7 mainboard.
2. HPT BIOS Revision: 1.11.0402.

BIOSID: 5C

1. Fix the option "Shutdown When CPU Fan Fail" set to Enable, cause system delayed issue.
2. Improve the STR function.
3. HPT 370 RAID BIOS version: 1.11.0402.

BIOSID: 3H

1. First release.
2. HPT370 BIOS version: 1.11.0402.