1. Fills MAC Address into UUID section in DMI data to pass WHQL.
2. Changes the definition of UUID in DMI data- move the MAC address from top to bottom of the string.
3. Fixes issue where the Shutdown When "CPU FAN Fail" option fails after about 16 minutes idling under Windows 2000/XP.
4. Fixes the compatibility issue where the ATI Radeon 9700 Pro fails to boot up with a certain power supply unit - TC-350P. With this power supply, the 9700 Pro will fail to boot up, requiring a reset button push to show the boot screen.
6. Shows "Hyper-Threading" wording on POST screen when Hyper-Threading CPU installed
7. HPT 372 BIOS Version 2.32. The RAID function is for BD7II-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled when the RAID controller chip is not detected.
8. BIOS Compile Date: 11/28/2002.

1. Fill in new CPU micro code (0F27).
2. HPT 372 BIOS Version 2.32. The RAID function is for BD7II-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
3. BIOS compile Date: 9/17/2002.

1. Upgrade the BIOS code for ICH4 to V1.5.
2. Fill in new CPU micro code (0F27).
3. Support PMC Pm49FL004T 4Mb Flash ROM.
4. Provide multiplier higher than 24x in SoftMenu.
5. Fix some CL=3 DDR400 memory modules fail to boot issue.(Both DDR333 and DDR400 modules can only work at DDR 266 owing to 845E chipset specification.)
6. Fix "CPU Shutdown Temperature" function failed under Win2K.
7. HPT 372 BIOS Version 2.32. The RAID function is for BD7II-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
8. BIOS compile Date: 8/26/2002.

1. Fix multimedia device lost issue with 533MHz FSB CPUs while load Fail-Safe / Optimized Default in BIOS.
2. Add SVID and SSID for ICH4 USB 2.0 controller.(SVID:147B,SSID:7402)
3. Load proper setting automatically for Willamette CPU when Load Fail-safe/Optimized Default in BIOS.
4. HPT 37x BIOS version 2.31. The RAID function is for BD7II-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
5. BIOS compile date: 7/23/2002.

1. Northwood CPU will be automatically detected its FSB while Load Fail-Safe/Optimized Default in BIOS Setup of SoftMenu.
2. Differentiate the USB 1.1 from USB 2.0 controller on PCI Device listing screen.
3. Fix Boot Agent failed to boot-up while enabled the Boot ROM in BIOS with hard disk on High-Point Port.
4. Modify the DMI data to fix on line diagnostic tool issue (PC Pitstop).
5. HPT 374 BIOS Version 1.21.
6. BIOS compile date: 7/02/2002

1. Add an option "Enhance DRAM Performance" in Advanced Chipset Features.

2. HPT 37x BIOS Version 2.31 The RAID function is for BD7II-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected

3. BIOS compile date: 5/3/2002.

!!!Attention for upgrading BIOS!!!
*When you upgrade bios to new bios included HPT 2.31 bios, we highly recommend you backup your system and data to an independent storage device first. New HPT 2.31 bios may corrupt original RAID configuration created on old bios occasionally. That means you may need to rebuild RAID configuration. If it happens, all the data on RAID-0 will be gone!
* For RAID-1 user, please press "CTRL+H" to enter hpt37x setup.
* Please upgrade HPT 2.31 driver before upgrade bios.

1. First release.
2. HPT 372 BIOS version 2.0.1024. The RAID function is for BD7II-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
3. BIOS compile date: 4/19/2002